Asphalt & Road Surfacing Tenders

M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion (SS-1) conforming to IS: 8887 at a rate of application of 0.7-1.0 kg/sqm on surface of WMM/VVBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and as directed.

Providing and applying tack coat using hot straight run bitumen of grade VG - 10,including heating the bitumen, spraying the bitumen with mechanically operatedspray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specificationsOn bituminous surface @ 0.50 Kg / sqm

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified.

Providing and laying 40mm thick mestic asphalt wearing course with paving grade bitumen meeting the requirement given in the table 500-39 preored by using mestic cooker as per clause 516 MORTH.

2 Box cutting the road surface to proper slope and 104.63 Cu.M. 109.05

cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be