Loading
Loading…
Loading…
6,155 results • Best match
Resurfacing of Road (P/L DBM, BC and mastic, 45.00m, 24.00m, and Service Road Balance work in Sector-142) Noida
Tender : Resurfacing of Road (P/L DBM, BC and mastic, 45.00m, 24.00m, & Service Road Balance work in Sector-142) Noida
REPAIRS/RESURFACING TO MAIN AND INTERNAL ROADS WITH ROAD MARKING AND ROAD FURNITURE AT SITE A3 OF NAVAL BASE KARWAR
Material and labour for preparing of old/new bituminous surfaces of road and making 2mm thickness centre lines, dashes, arrows etc and the like n exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction etc complete all as specified and directed.
Repairing and Resurfacing of Road from Gadana Village to Aloda Jagir Village Cut, YEA .WC-06
Providing and applying tack coat on the prepared surface with bitumen Medium setting emulsion in boiler and spraying the emulsion with spray set fitted on bitumen boiler including cleaning, preparing the existing road surface as per specifications (MORTH 503(b)/AR/YEIDA) On granular base such as WBM and WMM surface with 2.50Kg of bitumen for 10Sqm
Resurfacing with Five Year Maintenance Work of 75mtr wide Road LHS Sector-28 Side YEIDA.WC-04
Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor on the prepared bituminous surface cleaned with mechanical broom On granular base such as WBM and WMM surface with 2.50Kg of bitumen for 10Sqm AR YEIDA MORTH SOR 2020 based on uppwd / SOR-2020
Resurfacing Various T.P Road in Shela T.P Scheme 1&3 in AUDA Area. (RW No 01/2026-27)
aggregate & asphalt by batch mix/drum mix plant and
Resurfacing of 60m wide road from DMIC Near Maicha Village-Ghanghola Cut Sector Ecotech-11, Greater Noida.
Providing and laying 40mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2mm nominal size at rate of 0.005 cum per 10 sqm and at an approximate spacing of 10cm centre to centre in both direction, pressed into surface when the temperature of surface is not less than 1000c protruding 1mm to 4mm over mastic surface, all complete as per MORTH5.11/clause-516 (ARGNIDA)