Electrical Works & Installation Tender Results

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing Cable tray as required. ( Height of cable tray varies from 3- 7 Meters)

Work Name:GENERAL-Special repair works for Short Stay Home At vellimadukunnu - Kozhikode-SR WORK-Electrical Maintenance Work-Electrical Maintenance Work-General Electrical Work

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply,Installation,Testing of floor mounted cubicle type indoor compartmentalized 415V., 50 Hz. dust & moisture proof LT Distribution panel board with following electrical accessories fabricated from 14 SWG CRCA sheet with MS angle frame as required. The base of panel should be made with 75 x 40 x 4.4 mm MS channel. The panel should have adequate strength & space to accommodate the incoming & outgoing switches and bus-bars with all interconnection in between the switches and bus-bars with copper flat / flexible wire of suitable capacity. The panel should be provided with cable alley for facilitating connection of all the incoming & outgoing XLPE Cables with termination arrangement by S&F copper terminal stud / bolt of required sizes. The panel with earthing attachment is to be painted with powder coated paint as per direction of EIC. The panel board should consist with the followings:- A. INCOMING:-- 1) 415V., 630A., TPN main switch of open execution type with 3 nos.630Amp. HRC fuses [L&T, Cat no SK 95521] -1no 2) 415V., 630A,ON load Change Over switch. [L&T, Cat no.CO46300OOOO] - 1 No B.Bus Bar:- 4 nos tinned Copper bus bar of size 2x(80X5) mm, mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

eProcurement System of Government of West Bengal Created By: GOUTAM GHOSH Created Date/Time: 19-May-2026 12:59 PM Tender Title: ei work for newly constructed building at DIET Tender ID: 2025_WBPWD_959605_2