Fabrication Works Tenders

M&L in repair for identification sign/cautionary mandatory and information sign board area exc 0.60 Sqm and n exc 1.20 Sqm with thickness not less than 3.0mm aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI ) on both side with green base, including writing of necessary letter/symbols of reflective type fixed on and including stainless steel frame of size 25mmx25mm and hang on 50mm dia stainless steel pipe(fabrication work from SS-304 material) of height 2.4 mtr from ground level to top and post embeded in ground with PCC 1:3:6 TYPE C-2 using 40mm graded aggregate of size 45x45x45cm including necessary excavation and earth work and making plateform of size 150x45x30cm with PCC 1:2:4 using 20mm graded aggregate including necessary formwork and covering all exposed surfacess with black colour glazed ceramic tile (joint less) of size (600x300x7mm) / (450x300x7mm thick over and including 10mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed to match the tiles complete. Note:- The specifaction of board is held with GE(A) Barmer as sketch. The letters and symbols etc on both side shall be as per site requirement of user and as approved by GE. The size and font of wording/ arrow/ symbols as per direction of Engineer In-Charge.

Stone Dustbin: Fabrication and supply of Sandstone dustbin with SS bucket having the top of Corten steel/Cast Iron/ Stainless Steel with

Supply and Fabrication, installation , testing and commissioning in replacement factory made IP-54 , CPRI Approved , Out door type , LT electrical panel board, AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, outdoor type, fabricated with 3.15 mm thick made of CRCA, powder coated , , Cable gland, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars 4 Nos, 800 amps capacity insulated with colored PVC sleeves mounted on suitable insulators and seperators, holes drilled for connections, complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- INCOMING :-(a) MCCB 4 Pole, 415 V, adjustable thermal setting ,400 Amps with breaking capacity 36 KA - 01 No. OUTGOING :- (a) MCCB 4 Pole, 415 V, adjustable thermal setting 250 Amps with breaking capacity 25 KA - 02 Nos. (b) MCCB 4 Pole, 415 V, adjustable thermal setting 100 Amps with breaking capacity 16 KA - 02 Nos. (c) MCCB 4 pole 63 Amps, 415V, 16 KA-01 No. (d) Voltmeter, electronic, digital type, with selector switch 0 - 500 volts, AC, 50 Hz - 1 No. (e) Ammeter electronic, digital type, 0 - 800 amps, AC, 50 Hz - 1 No. (f) Current transformer 200 / 5 amps rating, AC, 50 Hz - 3 Nos. (g) Phase indication LED lamps - 3 Nos(RYB). Note: Make and complete detailed drawings of the LT Panel shall be submitted to and approved by the GE prior to procurement / manufacture . The panel shall be executed strictly as per approved drawings and specifications complete all as specified and as directed by Engineer-in-charge.

Supply, fabrication and erection of steel structure in position by using MS Tubes & Pipes of all diameters as per IS -1161, including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power changes etc., and cost and conveyance of all materials and including labour charges for fixing heavy iron grills, trusses, stanchions, heavy beams and girders erecting in position and fixing by using chain pulley blocks, derrek pole arrangements and cranes etc., complete and painting two (2) coats with ready mixed synthetic enamel paint in all shades grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter approved colour and make, including brushes to have an even shade, over priming coat with ready mixed red oxide metal primer paint (total three (3) coats), including cost and conveyance of all materials, as directed during execution complying with standard specifications etc., complete as directed during execution. (TATA / SAIL / VSP / JINDAL) shall be used. Note:- If any size of MS Tubes & Pipes of TATA / SAIL / VSP / JINDAL is not available, then only the filed Engineers' shall permit for usage of APOLLO Brand (or) as specified during execution.

Supply, fabrication and erection of steel structure in position by using MS Tubes & Pipes of all diameters as per IS -1161, including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power changes etc., and cost and conveyance of all materials and including labour charges for fixing heavy iron grills, trusses, stanchions, heavy beams and girders erecting in position and fixing by using chain pulley blocks, derrek pole arrangements and cranes etc., complete and painting two (2) coats with ready mixed synthetic enamel paint in all shades grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter approved colour and make, including brushes to have an even shade, over priming coat with ready mixed red oxide metal primer paint (total three (3) coats), including cost and conveyance of all materials, as directed during execution complying with standard specifications etc., complete as directed during execution. (TATA / SAIL / VSP / JINDAL) shall be used. Note:- If any size of MS Tubes & Pipes of TATA / SAIL / VSP / JINDAL is not available, then only the filed Engineers' shall permit for usage of APOLLO Brand (or) as specified during execution.