Fabrication Works Tenders

Design, Fabrication, supply of complete material for fabrication, erection, testing, commissioning

Supply, fabrication and installation of MS structure as per technical specification (TSS-10).

Cement Concrete 1:3:6 (One Cement, Three M.Sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three M.Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)

Design, drawing, fabrication, supply, erection, testing and commissioning of structural steel hoist bridge, Rail support Girder(for Gantry crane) & cat walk/walkway bridge on dam/barrages and canal/rivers consisting of foundation bolt assembly, base plate, columns, beams, bracings, stiffeners, ties, chequered plate covering, hand railing, staircase etc., with all accessories including cost of all materials, machinery, labour, welding, finishing, etc., complete as per specifications and drawings with all leads and lifts (without painting ).

Providing rain water harvesting using 8 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 8mm dia MS rod vertically and 3 No. of 8mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1.2m dia to a depth of 2.5m, supplying and filling 40mm HBG inside the erected well ring to a depth of 15cm, and top covered with RCC circular perforated cover slab of 0.9m dia and 7.5cm thick which inclusive of cost and fabrication of 8mm M.S reinforcement at 15 cm spacings on both directions and one 10mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. i ) 2 track sliding window. In 2nd floor