Loading
Loading…
Loading…
494 results • Best match
SITC of OFC and network Infra at Thoothukudi Airport
OFC cable Laying - Through underground hdpe through surface chambers at 100M interval OFC cable Laying - Through Hume pipe
Work
Supply of armored fibre optical cable (6 fibre) suitable for communication between LIU to LIU in SAS system.
Supply Installation Commissioning and Testing for Providing
Optical Fiber Cable As mentioned in buyer Uploded ATC Document Shedule of Requirement
SHIFTING OF LMC TO PRISM JOHNSON INSIDE JSW DOLVI PREMISES
Blowing of Optical Fibre Cable inside HDPE Duct: All activities pertaining to Blowing of Optical Fibre Cable in same pipeline trench directly (after testing drum at site), through CS / HDPE conduits along the pipeline also at crossing cable, sealing using all materials required, including laying of warning mats, etc. as per direction of EIC
Providing Additional CCTV cameras, including Ethernet switches and associated works for video surveillance system at Anushaktinagar, Mumbai-400094
Supply and laying of following 24 core, SM, OFC as per the specification and as indicated below Note: 1) The 24 core single mode fibre should be pulled by use of strength member provided inside the cable by using the proper pulling equipments. 2) The fiber outer sheath should not be damaged while pulling the fiber cable. 3) The polypropelene rope should be kept as spare inside the HDPE pipe, if in HDPE pipe, for the future laying of cables. 4) The force applied on the fiber optical cable should not exceed the pulling force recommended by the manufacturer. 5) While pulling the fiber optical cable, the minimum bending radius should not exceed the manufacturers' recommendation. 6) Pre-despatch inspection to be offered for the OFC. 7) Newly laid cable need proper aluminium tag required (indicating location) & route marker. Also if cable is laid on surface through duct proper aluminum tag should be fitted using ms tie on duct.
SOLAR POWERED CCTV SYSTEM AT KADAKKARAPPALY GRAMAPANCHAYATH MCF AND ITS MONITORING AT GRAMAPANCHAYATH OFFICE
Supplying and drawn of 6F Armored OS2 optical fiber cable, (with High carbon stay wire with all require accessories ) Single Mode, 9/125 - micron promary coated buffers, 9/125/250 (OS2) micron (OS 1 is not accepted), Corrugated Steel Tape Armour, BELLCORE GR 20/ IEC 794-1, Water Swellable Glass Yarm, Attenuation @1310nm & It; 0.34 db/KM MAX - @1550nm & It; 0.22 db/KM MAX, HDPE Outer Sheath, THIXOTROPIC Loose Tube Gel, Corrugated Steel Tape, Armouring Type, & gt; 0.15 Armouring Type Thickness, PBTP Loose Tube Material, BlackJacket Colour, 2.8mm Loose Tube Diameter, 2.0mm Jacket Nominal Thickness, 1250 N Tensile Strength
