K D Electricals

LED Lamps- bulb LED Lamps- Bulb ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 12Watt/1200 Lumens 3Watt/300 lumens, 5Watt/500 lumens, 7Watt/700 lumens, 9Watt/900 lumens, 12Watt/1200 Lumens, 15Watt/1500 Lumens, 18Watt 1800 Lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 2 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * 1/3 Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) SMS LED CHIP * LED Make C & s * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. 1451 * LED life Certificate Test Report Date 25/08/17 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number 215 * LED Lamp Life Certificate date 18/10/17 * Name of Lab where test conducted DELHI TEST HOUSE * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. 621 * Test Report Date 16/11/17 * Name of lab where test DELHI TEST HOUSE * 2/3 conducted Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Nagendra Singh 221002, OFFICE OF THE DIVISIONAL RAILWAY MANAGER, NORTH EASTERN RAILWAY, VARANASI 200 15

LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated 36W 36W 1/5 Power Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 4000 deg K * Type of fixture (in feet) 2x2(30W to 48W) 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Poly carbonate (UV stabilised) * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy Yes * 2/5 (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +50 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, model number, serial Yes * 3/5 number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : Yes * 4/5 2012 Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SARJIT SINGH RANA N 249124, Executive Director (Tehri Complex), THDC India Limited, Bhagirathi puram 20 60