DERPA INDUSTRIAL POLYMERS PRIVATE LIMITED

tents tent extendable frame supported complete with accessories Tents Tent Extendable Frame Supported Complete With Accessories ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Description of Item Tent Extendable Frame Supported Complete with accessories (OG W.P. Polyester Viscose Dope Dyed) (For Dope dyed Tent) Specification :- JSS- 8340-38: 2010 (Revision No. 1), (for Tents)with components made by Dope Dyed Fabrics. and CQA(GS)/US/467(d)(For metal components) tentextendableframesu pportedcompletewithac cessories(ogw.p.polyes terviscosedopedyed)(fo rdopedyedtent)specific ation-jss-8340-382010( revisionno.1)(fortents) withcomponentsmadeb ydopedyedfabrics.andc qa(gs)us467(d)(formet alcomponents) Availability of specification for Dope Dyed fabrics PROV/S/4369/FWP PV/RIP/TC-11/1(a) and PROV/S/4369/Fabric Green P V/TC-11/2(b) can be obtained from The Controller, Controllerate of Quality Assurance(Textile & Clothing), Post Box No.294, Kanpur-208004 N/A Availability of specification for Tents JSS- 8340-38:2010 (Revision No.1) can be N/A 1/4 and metal components obtained from The Director, The Directorate of Standardisation, Min. of Defence, J-Block Room No. 5 Nirman Bhavan PO, New Delhi-11 and CQA(GS)/US/467(d) can be obtained from The controller, controllerate of quality assurance(GS).Post Box No.127, Kanpur-208001 SIZE Size 2 M Unit 2munit COMPONENTS Fly Outer Fabric 410 GMS OG W.P. Polyester Viscose Dope Dyed to specification no.- PROV/S/4369/FWP PV/RIP/TC-11/1(a). (For Dope Dyed Tent) N/A Liner Inner fabric green 205 GSM Polyester Viscose Blended Dope Dyed as per specification No. PROV/S/4369/Fabric Green P V/TC-11/2(b). (For Dope Dyed Tent) N/A End Curtain Fabric 410 GMS OG W.P. Polyester Viscose Dope Dyed as per specification no. PROV/S/4369/FWP PV/RIP/TC-11/1(a)lined with Fabric Green 205 GSM Polyester Viscose Blended Dope Dyed as per specification No. PROV/S/4369/Fabric Green P V/TC-11/2(b) ( For Dope Dyed Tent) N/A Metal Components As per specification No CQA(GS)/US/467(d) N/A TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. YES N/A Test reports to be furnished to buyer on demand yes N/A 2/4 name of lab Spectro Research Lab Ventures (P) Ltd N/A address of lab G-3, Bajrang Bali Industrial Area, Panki Site-IV, Kanpur – 208 020 (U.P.) N/A test report no 170516031/170516006 3 N/A test report date 29.05.2017 N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohit Pundeer 799012, HQ TRIPURA FRONTIER BSF, SALBAGAN (AGARTALA) 100 60 EMD Required No ePBG Required No

sports and running shoe Sports And Running Shoe ( 535 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Governing Specification Conforming to Footwear Design and Developement Institute, A-10/A Sector 24, Noida specification No.- FDDI/TA/20 forwarded by DG CRPF vide their letter No- U.II-98 (Spec)/2012-13-Prov (Tactical Boot) dated 15-10-2015. Design of Shoe shall be as per Sketch For Light Weigt Running Shoe attached with previous MHA approved Specification approved by MHA vide letter No- U.II- 98(Spec) 2013-14-Prov.38 dated 26-12-2013. - Specification & Drawing for Sports and Running Shoe https:/dgserver.dgsnd. gov.in/rc/5311160001. pdf - Specification & Drawing seen and understood Yes - Size Size Assorted sizes ( 6, 7, 8, 9, 10, 11 and 12 ) as 6, 11, 12, Assort ed sizes ( 6, 1/4 per buyers requirement 11 and 12 ) as per buyers requirement Material Upper Material PU Coated Synth. with minimum thickness of 1.3 mm, and mass of 550 to 650 g/sq. metre - Lining Material Skin Fit Type Knitted Polyester Fabric 180 gm/sq. metre, with 3.0 mm foam of min density 32 Kg/cubic metre - Heel Grip Non Woven material, 1.5mm min - Socks Full (detachable Insocks) 2.5mm EVA with Skin Fit - Collar Foam 12mm PU foam of min density 25 Kg/cubic metre - Tongue Foam 5mm PU foam of min density 25 Kg/cubic metre - Colour Colour White - Colour of Sole shall match with colour of Upper Yes - Sole PU Sole Construction Direct Moulding process - Soling Material PU Polyester - Thickness of sole (Minimum) 4 - Cleat height (Minimum) 1 - Sole Flexing ( 30000 cycles), cut growth not exceeding 4mm as as per IS 15298-2011 Yes - Laces Length of Nylon Laces 100 - Breaking Strength of Laces (Kg) 25 - Other Requirement Mass per pair for Size-8 shall be 650 ± 40 gm (with increase or decrease of 5 % for each bigger and smaller size respectively) Yes - Back height for Size-8 shall be 65±2 mm Yes - 2/4 (with increase or decrease of 2 mm for each bigger and smaller size respectively) Test Report Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. false Name of the Lab As per OEM - Address of The Lab As per OEM - Test Report No. As per OEM - Test Report Date As per OEM - Test reports to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Swati Bisht 474020, AIR FORCE STATION MAHARAJPURA GWALIOR 535 15 EMD Required No ePBG Required No