VIKAS TRADING CORPORATION COMPANY

plastic moulded chair Plastic Moulded Chair ( 75 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest true * Plastic Material ABS PLASTIC (Acylonitrile Butadiene Styrene) FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING 1/4 PLASTIC, POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 560 * Seat Depth in mm (+/- 5 mm) 550 * Chair Height in mm (+/- 10 mm) 850 * Chair Dimensions Conforming To IS 3663 (Latest) * Weight of Chair (IN Grams) 3699 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 1- Cycle Number 2 is more than 50 % Support/Under Structure Support/Under Structure Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Colour Blue * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jayakrishnan K 673647, CALICUT INTERNATIONAL AIRPORT P.O. CALICUT AIRPORT 75 30