Maharashtra Tenders (MahaTenders)

Supply of Tyre Changer Machine

Annual Maintenance contract for Providing Support services for the day-to-day operations, Monitoring and Maintenance of Electrical, AC and Firefighting systems at RRSC-C campus and Antariksh Vihar, Civil Lines, Nagpur

Spares required for ELGI Air Compressor

SILICON DIODE AVERAGE FORWARD CURRENT 320A.

Wooden packing 1200 x 300 x 150 mm for m [Wooden packing 1200 x 300 x 150 mm for making lead bearing working with hydraulic jacks for use of RARV / Tool Van capable to withstand 140 MT load of seasoned sal wood /sheeshm wood chemically treated with red oxide paint and both end secure by 30 mm x 5 mm iron strip or its equivalent. ]

Axle oil.

SLIP RING ASSLY.

KIT GASKET FOR CAM SHAFT DRIVE HOUSING

PAINT R.M. BRUSHING BITUMINOUS BLACK.

Failure Indication cum brake

Supply, installation, testing and commissioning of 1000 litre capacity heavy-duty stainless-steel drinking water cooler .

Converter Oil for 3 phase locomotives as per Spec.No.IEC 60296-2003 and CLW Spec.No.CLW/ES/3/0172 Alt-D or latest.

(For Vande Bharat) Traction Motor Bracket Pin.

GREASE GRAPHITE GRADE.

Implementation of Cyber security in SCADA system for the NE & SE Section of Mumbai Division

One Coach Set of Air Spring Assembly (160 KN Capacity) for Main Line/Rajdhani LHB coaches for FIAT type Bogies as per RDSO Specification No. RDSO/CG/S/23002, Rev- 1. Scope of Supply shall be as per specification RDSO/CG/S/23002, Rev-1 (Each Coach Set will Consists of Four Air Spring Assembly). Packing Instruction - MCF SPI- 042. (AS) RDSO Item ID: 3100341

Making new borewell arrangement at Asudgaon bus depot Turbhe bus bepot and Ghansoli bus depot of NMMT

Power contactor

Set of end shields(DE & NDE) with grease [Set of end shields(DE & NDE) with grease cups suitable to 6312/C3 bearings for M/s. I.C. Electricals make Oil Cooling Blower type IC 301M TESC, 30KW/40HP, 50Hz, 415V as follows. 1) DE side end shield with grease cups. Qty/set. = 01 no. 2) NDE side end shield with grease cups. Qty/set. = 01 no. Note: One sample set should be got approved before effecting bulk supply.]

Kit for Jointing [BTPN] consisting of 03 items. 1] Gland Ring for 100 mm Lubricated Taper Plug valve to RDSO Drg. no. WD-93066-S-07 Alt. 1, Qty. - 30 nos. 2] Gasket for 100 mm Lubricated Taper Plug valve to RDSO Drg. no. WD-93066-S-04 Alt. 1, Qty. - 05 nos. 3] Gland Packing for 100 mm Lubricated Taper Plug valve to RDSO Drg. no. WD-93066-S-08 Alt. 1, Qty. - 30 nos. Material and specification for Gland Ring and Gasket should be to IS 2712 : 2024, Gr O/2. Material and specification for Gland Packing should be to IS 4687 : 1995 (RA-2022), Gr type-2. Note: 1 set consists of 65 nos. These components must be suitable and match with all makes of taper plug valve 100 mm supplied by RDSO approved vendors.

Internal Combustion Engine Crank Case.

Sr. DEN(E)BSL- Proposed construction of LHS(by Box Pushing method using R.H. Girder) in lieu of Level crossing No.24 at Kms. 535/16-18 on Jalamb-Shegaon Section. (in connection of PWD Jalamb ROB, Deposit work PWD, Khamgaon)

Kit for Joints [BTPN] consisting of 06 items. 1] Man Hole Jointing to RDSO Drg. no. WD-86081-S-61 Alt. 16, item no. 4 Qty.-10 nos. 2] Filling pipe jointing to RDSO Drg. no. WD-86081-S-61 Alt. 16, item no. 6 Qty.-05 nos. 3] Flange Jointing to RDSO Drg. no. WD-86081-S-66 Alt. 16, item no. 11, Qty.-10 nos. 4] Vapour Extractor jointing to RDSO Drg.no. WD-86081-S-61 Alt. 16, item no. 5. Qty.-05 nos. 5] Sealing ring for filling pipe cap to Drg. no. W/TF-2171 Alt. 1 Qty.- 400 nos. (Refer Note against item no. 21 of WD-86081-S-61 for mean dia and thickness) 6] Sealing ring for man hole cover to IRS Drg. no. W/TF-2169 Alt. 1, Qty.-25 nos. Material and specification as per drawing. Spec:

Tooth spacing K-value checking GO Gauge [Tooth spacing K-value checking GO Gauge for bull gear 72 teeth mating shaft pinion 20 teeth for WAP-7 locos to RDSO Drg. No. SKDP-3474 & RDSO: MP.M1-129/86. Sizes GO: 260.958mm/260.992 mm. Material: Tool Steel to IS: 3748/90, Hardness: 50/55 HRC. C alibration certificate from NABL approved Lab to be supplied along with the material.]

Draft key cotter to ICF Drg. no. ICF/SK-2-1-010, Alt. - B/4, item no. 4. Material and specification as per drawing.

PORTABLE BALANCER AS PER SPECIFICATION E [PORTABLE BALANCER AS PER SPECIFICATION ENCLOSED IN ANNEXURE "A"]

Wheel Sensor

PVC FLOORING ROLL 2 X 1850 X 14000 MM, COLOUR AS PER SAMPLE NO. NACFLG- 02, as per Drawing/Specification: RDSO/200 6/CG-12, Rev.2 of Sept-2023 or latest, with PVC WELDING ELECTRODE DIA 4MM=12 MTRS. PER ROLL. Item to be procured from RCF approved sources only. RCF Item ID: 2400073

WTP I_T 1599_WT_CHLORINATION TO C T POND

Execution of basic works proposed under Parishistha A of Conservation and Development plan for the Punyashlok Ahilyadevi Holkar Memorial Site at Choundi Village Tal.Jamkhed Dist.Ahilyanagar (Constr. of River bank Ghat, Internal Roads, Compound wall

Foam Gel based carbon adhesive, paint an

Supply and commissioning of induction he [Supply and commissioning of induction heater 2.6 KVA with intelligent micro controller based electronic control. Memory backup for the different sizes of components for bearing bore dia 20 to 300 mm & weight up to 40 kg., Technical Specification Attached. Make: Precision / GM Industries / SKF India / FAG India or it s equivalent.]

Supply, erection,testing and commissioning of 25KV, AC OHE modification work in connection with provision of rail level additional full length goods handling line at Taloja Panchanand Goods Shed in Mumbai division of Central Railway

Bolt, Nut and Split Pin for Axle Box .

Supply of Analog Card

Kit for Dome fittings consisting of 03 items 1] Hex. Bolt M - 10 x 90 with castle nut, split pin and washer to RDSO drg. no. WD-86081-S-65, Alt. 15, item no. - 18, Qty. - 20 nos. 2] Special Bolt for 100 mm Lubricated Taper Plug valve to RDSO Drg. no. WD-93066-S-10, Alt. 1, Qty.-15 nos. 3] Lubricating screw for 100mm lubricated taper plug valve to RDSO Drg. no. WD-93066-S-11, Alt. 1, Qty.-25 nos. Material and specification for sr. no. 1 should be as per drawing. Material and specification for sr. no. 2 & 3 should be to IS 2062 : Part - 1 : 2025, Gr E 250 A.

Growler tester for 3-phase induction mo [.Growler tester for 3-phase induction motor, 230V, 50 Hz dual magnetization yoke with standard accessories (1) Thermacol Moulded Carry Case: 1 no. (2) ASTM Test Block: 1 no. (3) Pie gauge: 01 no. (4) Puffer Bulb for powder spray: 1 no. (5) Dry Magnetic Powder black water base: 1kg. (6) Operational Manual: 1 no. Note: The firm will submit the warranty certificate, test certificate and calibration certificate along with the material]

PVC CASING CAPPING 4 X 4

RELEASE UNIT

Pneumatic Impact wrench 1/2"

Motherboard

CABLE LUG 10.0/M8 as per Specn. CLW SPEC [CABLE LUG 10.0/M8 as per Specn. CLW SPECIFICATION NO. CLW/ES/3/0130/O (TO BE PROCURRED FROM CLW APPROVED SOURCES ONLY.]

Supply of serial I/O card

Set of SS Tubes and Double ferrule

Door Hinge Pin 20 x 99 to IRS Drg. no. W/PN-39, Alt.-4. Material and specification should be IS : 2062-2011 (Re-affirmed - 2021), with Amendment no. 1 of Nov. 2012, Gr. E 250 A. Spec:NIL

SS double ferrule pipe fittings

WATER FLOW METER, MECHANICAL WITH CALIB [ WATER FLOW METER, MECHANICAL WITH CALIBRATION CERTIFICATE FROM NABL LAB, IS:2373 OR LATEST, SIZE - 50MM. LEAST COUNT - 10 liter, WATER METER SHOULD BE ENCLOSED TYPEWITH BRASS BODY COVER WITH METTALIC GEARS]

Construction of Service Buildings, Offices, Stores, Electrical Workshop, Store Building and Residential Quarters [Type-II (51 Units) & Type-III (8 Units)], Water tank, Electrification work in connection with Dhule (Borvihir)-Nardhana New B.G. Line (50.60 km) Project of Central Railway.

Supply, Installation, Testing and Commissioning of 1.6 MVA Hermetically sealed Transformers for Cirus, BARC

Supply, Installation, Testing and Commissioning of 3.3 Liter Prolife Engine for Tata 1112 Model Vehicles under Executive Engineer Transport (ES, WS and City) Division.