Fabrication Tenders in Madhya Pradesh

Providing, fabrication and supply of stopdam gates size 1.50m x 3.00m - 8 nos for Faraspur Barrage of WR Division Indore.

Providing, fabrication and supply of stopdam gates size 1.50m x 3.00m - 6 nos for Kherchakhedi Barrage of WR Division, Rajgarh.

Fiber Sheet Moulded, 2D Figurine Model, Rust Proof Fiber Paint, Epoxy Chemical Fabrication, Detailed Frame or Board BOQ Title BOQ001

Estimate for fabrication and erection work of gates on tentra escape head at sub div no 03 veerpur distt sheopur

Providing and Fabrication of I Type anchor bolt size M16x300mm and CI wedges for canal gates of various WR Divisions

Providing, Fabrication and erection work of Gate leaf assembly of size 1.85m x 3.01m - 1no of canal Head regulator gate.

Welding Cable (V2) as per IS 9857 (Q2) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Experience Criteria *In case any bidder is seeking exemption from ... category Welding Cable ...

Portable Welding Machine (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6369186 Dated : 21-06-2025 Bid Document 1/7 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 60 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

ELECTRODES WELDING STEEL MILD GENERAL PURPOSE, ELECT RODES WELDING STEEL MILD GENERAL, STEEL ANGLES 25X25X3 MM, FUEL FILTER, OIL FILTER ELEMENT, JOINT 2 THK IRON SHEET COVERED BY ASBEST, PIPE TANK TO FILTER, PIPE HIGH PRESSURE WITH END CONNECTION, AVR, PUTTY, VARNISH INSULATING AIR DRYING OIL, SODA ASHTECHNICAL, PAINT RFU MARKING WHITE

Procurement of EWAC make hard facing welding electrodes for coal nozzle tips of 2X250 MW unit No. 10 and 11 of STPS, Sarni.

SUPER STRUCTURE, SOLAR LIGHT, ACP SHEET FLEX, WELDING SUPPORT PLATE NUT BOLTS, FINISHING NO SOR RATES BOQ Title boq purchase for welcome board

PIPE PUMP TO FILTER, SEAL, PIVOT PIN KINGPOST, BOLT PLOUGH, JOINT 2 THK IRON SHEET, STEEL ANGLE, ELECT RODES WELDING, PUTTY, VARNISH INSULATING

PLA Material (2.85mm), Filament Breakaway Support Material White 2.85 mm, Printer Core for Object Fabrication, Printer Core for creating dissolvable support

Providing, fabrication and supply of dam shutter gates size-1.50m x 4.50m- 5nos for Hapla Dipla barrage of WR Division, Khandwa.

Providing, fabrication, supply and erection work of Embedded parts of gates size 1.20m x 1.20m 10nos for Magarpati Barrage Dist. Barwani

Providing, fabrication and supply of dam shutter gates size 1.20m x 3.00m 4nos for Richi Kho Barrage of WR Division, Dewas

Construction of store room for HFA office in fabrication and partition over third floor terrace adjacent to HFA office ISBT Bhopal

Providing work of Stainless Steel Counter shank Nut bolt of different sizes with washer slotted head type for fabrication of gates

Fabrication and Fitting of 1 No of canal gate in Godhna tank under sub-Division Chicholi WRD Division Betul. (Second Call)

common and special proofed tarpaulins in square mtrs Common And Special Proofed Tarpaulins In Square Mtrs ( 13 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE AND ... 1/4 FABRICATION AND ... PROOFING Fabrication and ... proofing Fabrication and ... tarpaulins Fabrication and ... tarpaulins, Fabrication of ...

Welding Cable (V2) as per IS 9857 (Q2) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Experience Criteria *In case any bidder is seeking exemption from Experience Turnover ... category Welding Cable ...

Road Renewal Coat Work in Ward No. 11 from Sakir Bhai Welding Wale Shops to Wahid Bhai Patthar Wale House at Gairatganj, Distt. Raisen

Vehicle, Casual labour, Crane, GAS Welding machine with welder, Total Station with operator, RO-drinking, Emergency First Aid Medical kit, Hammer drill machine, DGPS

Hand gloves, Cutting wheel 14 inch, Welding holder, Air curtain 4 ft, Dustproof aluminium partition with glass 12 ft x 12ft, Cordless angle grinder

Providing, fabrication and supply of stopdam gates size 1.50m x 3.00m - 4nos for Sameli Barrage of Gandhi Sagar Dam Division, Dist. Mandsaur.

Providing, Fabrication and erection work of Trestle Assembly and Railing Decking of canal Head regulator gate for Mahi canal at RD 9.22km

Providing, Fabrication and erection work of Ladder etc. of canal gates size 3.25m x 3.10m 4nos at RD 30030 Bansujara Canal Project

Flexible Poly Vinyl Chloride (PVC) Flooring Sheet in Rolls of Size: 1850 MM Width X14 Meter Long of 2mm nominal thickness (25.9 Sq. Mtr.), Conforming to RDSO Spec. RDSO/2006/CG-12 Rev-02, Firm should supply suitable PVC Welding Electrode dia. 2mm & Length - 55 Mtrs. per Roll for Three Tier Economy (LWACCNE) Coaches. Qty. and Colour: Light Grey (RAL 7045)- 34 nos. and Wine Red (RAL 3005)- 15 nos

Flexible Poly Vinyl Chloride (PVC) Flooring Sheet in Rolls of Size: 1850 MM Width X14 Meter Long of 2mm nominal thickness (25.9 Sq. Mtr.), Conforming to RDSO Spec. RDSO/2006/CG-12 Rev-02, Firm should supply suitable PVC Welding Electrode dia. 2mm & Length - 55 Mtrs. per Roll for Three Tier Economy (LWACCNE) Coaches. Qty. and Colour: Light Grey (RAL 7045)- 34 nos. and Wine Red (RAL 3005)- 15 nos

Flexible Poly Vinyl Chloride (PVC) Flooring Sheet in Rolls of Size: 1850 MM Width X14 Meter Long of 2mm nominal thickness (25.9 Sq. Mtr.), Conforming to RDSO Spec. RDSO/2006/CG-12 Rev-02, Firm should supply suitable PVC Welding Electrode dia. 2mm & Length - 55 Mtrs. per Roll for Three Tier Economy (LWACCNE) Coaches. Qty. and Colour: Light Grey (RAL 7045)- 34 nos. and Wine Red (RAL 3005)- 15 nos

W.P. 21KG/CM2, CAP.- 20 T/HR., LIVE STEAM TEMP. 320 0C, REPLACEMENT OF BOTH SIDE BOTTOM HEADERS WITH STUB AND TUBES OF BOTH SIDE HEADERS REPLACEMENT OF BOILER NO. MP-4637, W.P. - 45KG/CM2, CAP.- 40 T/HR., LIVE STEAM TEMP. 450 0C, BANK TUBES

GMAW (MIG Welding Machine) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Bid Number ( ) : GEM/2024/B/5181366 Dated : 19-07-2024 Bid Document 1/6 Payment Timelines Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 14 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Manager HEP Bhopal, Department of Heavy Industry, Bharat Heavy Electricals Limited (BHEL), Ministry of Heavy Industries and Public Enterprises (Bhel Bhopal) Splitting

FEVICOL SR 998, JOINTING ASB F COMP GR 0 POINT 8MM 100x100CM, FEVICOL HEAT X, DEWRITE SR 998, ELECT RODES WELDING OLIQUE STEEL MILD GENERAL

Art-working of Double sided PTH PCB as per given schematic (Q3), Fabrication of Double sided PTH PCBs as per developed artwork (Q3)

Supply Installation Commissioning testing and fabrication of sewage submersible pump at Dirty Back wash Water tank at WTP Under Narmada water supply project.

DEAD BODY VECHILE CHASSIS TATA INTRA AND COMPLETE FABRICATION AND INSURANCE AND REGISTRATION AS PER OTHER SPECIFICATION ULB REQUIRED AT MUNICIPAL COUNCIL PORSA

M2/1010-000624 (M2/IAN-339SA) JOINT BALL FRONT WITH THREADED END, M2/BOF-6125104 DIP STICK WELDING, M2/BOF-5057569 PLUG, M2/BOF-6113260 PLATE

gmaw welding machine with accessories (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller OEM Authorization Certificate, OEM Annual Turnover *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5990735 Dated : 03-03-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 3.00 Duration of ePBG required (Months) ( ) . 14 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Director, CIAE, Bhopal Central Institute Of Agricultural Engineering Bhopal, Department of Agricultural Research and Education (DARE), Indian Council of Agricultural Research (ICAR), Ministry of Agriculture and Farmers Welfare (Icar Unit Ciae) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

PROVIDING AND LAYING OF SEWER LINE AND MANHOLES AT KGN FABRICATION AND PRAKANT TIWARI MULTI SUNDAR NAGAR WARD NO. 71 UNDER ZONE NO. 11

Gas Diffuser equivalent to (Standard) Part No. 014.0261.103(Zero One Four Dot Zero Two Six One Dot Ten to the power Three) of make Abicor Binzel or Similar, suitable for fitment in MIG/MAG Welding Torch make Abicor Binzel model MB 36 KD from OEM or OEM authorized dealer. Tenderer must submit the OEM/OEM authorization along with offer otherwise offer will not consider. Test certificate to be submitted at the time of supply

Gas Diffuser equivalent to (Standard) Part No. 014.0261.103(Zero One Four Dot Zero Two Six One Dot Ten to the power Three) of make Abicor Binzel or Similar, suitable for fitment in MIG/MAG Welding Torch make Abicor Binzel model MB 36 KD from OEM or OEM authorized dealer. Tenderer must submit the OEM/OEM authorization along with offer otherwise offer will not consider. Test certificate to be submitted at the time of supply

Construction of CC Road at ward 04 05 06 07 From Jagdish Welding Shop to Ram Mandir Tiraha Makrand Gupta House to Sandeep Kirna Store (Gandhi Chowk)

THE SYSTEM DESIGN DRAWING FABRICATION MODIFICATION OF SLURRY BMD TO DOPED EMULSION BMD TESTING SUPPLY AND COMMISSIONING OF 2 NOS BULK EMULSION EXPLOSIVES DELIVERY UNITS

Fabrication supply and erection of Trash rack MS Jaal and other repairing work of Sluice gates of Beerpur tank under sub div Beerpur distt Sheopur

Construction of C. C. Road in Front of Aalmi Madarsa From Alfala Dairy to Tin Fabrication Shop and Other Adjoining Passages, Ward 41, Zone 11

Estimate for Fabrication and assembly of wire rope drum cover and Cable Guard at Asan Barrage Dam under E/M heavy machinery Sub Division Gwalior.

Repairing of target trolley greasing oblique welding including labour charge, Electric Lamp with fitting charge, Light Control regulator with switch and wooden board, Electric Bulb, Electric Wire 1mm

For the financial year 2025-26, the rates for work related to iron jangle, jali, engel, etc. are to be obtained. (Welding wage rate per kg of iron.)

Purchase of special purpose L and T make hard facing welding electrodes for boiler coal Nozzle tips of 2X250 MW unit No. 10 and 11 of STPS, Sarni.

Blow Pipe for Welding and Cutting as per IS 7653 (V2) (Q3) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6367431 Dated : 16-07-2025 Bid Document 1/6 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 30800 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting