Fabrication Tenders in Madhya Pradesh

Heavy duty, Fire retardant IS marked C [. Heavy duty, Fire retardant IS marked Canvas Sleeve size 2 (Inches) ID with asbestos coating, for protection of welding cables and hoses for Canvas Sleeve should be Industry standard and as per IS 636. Test Certificates, Authorization/Dealership certificate/OEM certificate to be submitted at the time of supply.]

Fabrication of 8 inch dia MS pipe stand for carrying laying jointing 8 inch dia MS 0.5 KM Coal yard to old CHP crusher and 6 inch dia GI pipeline from 0.5 km coal yard to east section coal yard and 0.5 km coal yard to west coal yard at Jayant Projec

STEEL ELECTRODE 10 SWG (3.15 MM) TO SPECN, EUTECTTIC 680 TO IS: 813- 1961(MAKE-M/S DIFFUSION, M/S LARS ( 100 kilogram ), Welding Electrode 3.15 Mm For Welding Between EN24 And Mn- Steel(IS 3503-1966) . MAKE: - D&H SECHERON ( 51 kilogram )

Cupboard, Repair of Split AC, Repair of Air Compressor, Four Post for Support Leg, Repair of Welding Machine

AVR, LOOM HARNESS, ELECT WELDING STEEL, SHEET CELLULAR, LEATHER CLOTH BLACK, PLY WOOD GENERAL PURPOSE, PHOSPHATE COATING METAL

Design, fabrication and supply of power supply cabinets of size 600mm x 1000 mm x1850mm (36U)

Fabrication supply and erection of overhead (MS) water tank (capacity 24000 ltr.) at Tawa colony Harda

Procurement of Stainless Steel Flat and Brass Flat for fabrication of Gates of various WR Divisions

Procurement of Structural Steel MS Angle ISA 75x75x6 for fabrication of Gate of various WR Divisions

Procurement of MS Round Bar of dia 63mm and of dia 56mm for fabrication of gates

Square and V threading work of MS Round Bar of different sizes for fabrication of Gates.

PRE FABRICATION OF LP CASING FRONT WALL,UPPER PART TURBINE SIDE AND GENERATOR SIDE -03 ITEMS

ALL FABRICATION AND REPAIRING WORK OF MAGIC AUTO MP38G1058 AS PER IN CLOSED ESTIMATE AND REQUIREMENT

Execution of balance works of Supply fabrication erection testing and commissioning of 3x600 MTs mounded type pressure vessels for LPG storage and supply fabrication erection and testing of 3 nos. Cone roof fire water tanks at LPG project sitE

Portable Welding Machine (V2) (Q3) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6247837 Dated : 27-06-2025 Bid Document 1/15 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 71900 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

LEATHER CLOTH BLACK, PLYWOOD GENERAL PURPOSE, SHEET CELLULAR, ELECT WELDING STEEL, LT WIRE, AC GAS BOTTLE, AC VENT CLEANER

Iron Bar, Iron Net, Cutting Blade 4 Inch, Welding Rod, Packing Wire, LED Focus Light, Rexene, Combat Radium Sheet

TADIDS Display System, Wall Mount Kit, Copper Wire 10mm, Hand Screen Face Shield, Welding Holder, Cable Manager, Sealing Rose

Leather Apron as per BHEL specifications (Q3), FLAME RETARDANT WELDING COVERALL WITH CAP (Q3), WHITE CLOTH ADHESIVE TAPE (Q3)

FABRICATION OF LOWERING AND LIFTING WORK FULLY AOUTOMATIC MACHINE ON ULB EICHER TRACTOR 5150 AS PER SPECIFICATION

Custom Bid for Services - Design Supply and Installation of Mechanical seal for DE and NDE side complete cartridge inclusive of plan 31 cyclone separator API plan 31 piping of SS 316 SHL 600 including fabrication and installation at IPS Thamna of ... including fabrication and ...

Copper welding cable 35 point 59 sq mm, Copper welding cable 50 Point 59 sq mm, Ball bearing 6024, Ball bearing as per sample, Drill 3 point 45 mm High speed steel, Power hydraulic Oil AW 68, Cast iron machine welding electrode size 3 point 15 x 350 mm, diamond wheel dresser 2 carat N grade size dia half inch ledngth 8inch, hack swa hand frame 14 inch, Brass rod dia 16 mm lead free

DARK GLASS FOR WELDER'S SCREEN (Q3), scrubbing brush (Q3), Welding Goggles for Eye Protector as per IS 5983 (Q4), Welder Gloves or Gauntlets as per IS 2573 (Q3), Welding Helmet as per IS 5983 (Q3), Inherent Fire Retardant Overall for Firefighting and Rescue Purpose (Protective Coveralls) (Q2)

Cotton Waste Colored, Rubber Welding Hoses-IS 447, oxygen gas regulators, Protective Eye Goggles (MHA), Welding Hand- Shield for Eye Protector, Welder Gloves or Gauntlets- as per IS: 2573, Acetylene Pressure Regulator - as per IS 6901, scrubbing brush, Emery Powder Grit # 120 Experience Criteria 1 Year (s)

Sheet Cellular 37MM, Mat Assy Under RH, Electrodes Welding Steel Mild, Leather Cloth White, Leather Cloth Green, Deleted Carpet Set

Running Maintenance of Pump set, Street Light, Electrical Installation of Bldg. etc. of GSI, Bhopal. (SH:- Providing Earthing strip for Protection of testing equipment, fabrication of panel door of HT line, Providing LED lights to eliminate dark out portion at the premises of GSI, arrangement of standby water supply to the tank and allied electrical works).

Fabrication and supply of Spindles and Nuts of Sluice Valve under store WWD on Annual rate contract Basis

Providing, fabrication, supply and erection work of gate size 1.40m x 1.40m 10nos for Sendla Barrage Dist. Dhar

Fabrication and supply of Spindles and Nuts of Sluice Valve under store WWD on Annual rate contract Basis.

FABRICATION OF OUTLET PIPE AS PER DRAWING NO. 12120520101 REV.05 ASSY. OF ITEM NO.01 TO 11.

Fabrication of MS chamber cover for tube well at various places ward no. 14 under Zone 3 Bhopal

Procurement of Stainless Steel Counter shank Nut bolt M10x65mm with washer slotted head type for fabrication of gates.

Putty, Steel Angles, Paint RFU Red Oxide, Paint Sync Ena, Electrodes Welding Steel Mild, Joint two Thick Iron Sheet Covered, Nails Steel Wire Round, Nails Steel Wire, Electrodes Welding Cast Iron, Cable Electric Copper, Cable Electric D PVC Single, Adhesive Synthetic Resin Harder, Cable Elect ATC Elastomer Insulated

MIG WELDING WIRE (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2024/B/5569879 Dated : 19-12-2024 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 65254 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank ICICI ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 5 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : CENTRAL WORKSHOP NCL Singrauli Madhya Pradesh, COAL INDIA LIMITED, Northern Coalfields Limited, Ministry of Coal (Northen Coalfield Limited) MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Fevicol SR, Leather Cloth Black, Plywood for General Purpose, Sheet Cellular, Paint RFU G Yellow, Putty, Elect Welding Steel Mild General

AVR, BLADE IRON CUTTER, WELDING ROD, WATER PUMP ABI, GASKET FOR CYL HEAD, OIL FILTER, FUEL FILTER, FUEL PIPE, ELEMENT FILTER

AVR, ANABOND RTV, LOOM HARNESS, PAINT RFU WHITE, ELECT WELDING STEEL, SHEET CELLULAR, PLYWOOD GENERAL PURPOSE, LEATHER CLOTH BLACK, LT WIRE

NOZZLE PART CODE 220990 FOR DURAMAX MACHINE TORCH (Q3), DURA CO2 REGULATOR FOR AUTO K 400 MIG WELDING M/C (Q3)

Construction of C.C. Road from Nirankari Aata Chakki to Shri Lalchand House and Vijay Welding to Naala, Baba Narayan Shah Ward

NITRILE COATED HAND GLOVES -NYLON LNITED LINER WITH NITRILE COATING ON PALM AND ALL AROUND FINGERS, S, HEAT RESISTANT LEATHER GLOVES LARGE -CUFF LENGTH 4 INCH YELLOW FULL FINGERED LEATHER SOFT FLEECE LIN, LEATHER APRON - MODEL: LG-613. MATERIAL- ... CHI, WELDING FACE ... - WELDING SHIELDALL ... ARC/TIG/MIG WELDING OPERATION

Providing,fabrication, supply and erection work of gate size 1.20m x 1.20m- 4 nos for Alkhad Barrage, Dist Badwani

Procurement of MS Round Bar of Different diameter 56 mm dia for fabrication of gates of various W.R. Divisions.

Providing, Fabrication and erection work of Guide Assembly of operating rod for sluice gate size 1.5m x 2.0m 2nos

Fabrication and erection of structural steel side inspection pathway for Composite and Open web girders including painting_fixing at site

Collection & Disposal Waste Management Service - TROMMEL MACHINES KE AUTOMATION, MODIFICATION, FABRICATION, ELECTRICAL INSTALLATION AND COMMISSIONING; Liquid Waste, Dry Waste

Welding Electrodes for Bus Body Building Parts as per IS 814:2004 (with Latest Amendments) (Q3) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Experience ... category Welding Electrodes ...

Civil Work

Rubber Welding Hoses as per IS 447 (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 4 Days Bid Number ( ) : GEM/2024/B/5766454 Dated : 10-02-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 98999.64 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Portable Welding Machine (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6585686 Dated : 25-08-2025 Bid Document 1/6 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

AIR CURTAIN, SS EXHAUST HOOD WITH BAFFLE FILTERS, INSECT KILLER, GAS BANK, GAS PIPE LINE, FABRICATION OF DUCT, INLINE FAN