Fabrication Tenders in Madhya Pradesh

1528541202 HEAT SHRINKABLE SLEEVE SUITABLE FOR 95 SQ MM WELDING CABLE, 1709300200 WORM TYPE HOSE CLIP. MATERIAL S.S SIZE 1 2, 1709300300 WORM TYPE HOSE CLIP. MATERIAL S.S SIZE 3 4, 1709300400WORM TYPE HOSE CLIP. MATERIAL S.S SIZE 1, 2014259500 CABLE ... FOR WELDING , ... TIG WELDING MACHINE ... TIG WELDING MACHINE ... TIG WELDING MACHINE ...

Welding Electrodes for Bus Body Building Parts as per IS 814:2004 (with Latest Amendments) (Q3) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required ... category Welding Electrodes ...

Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller OEM Authorization Certificate, OEM Annual Turnover *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5991088 Dated : 03-03-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

LEATHER CLOTH BLACK, SHEET CELLULAR, WIRE STEEL MILD, ELECT WELDING ROD, WD 40, THROTTLE BODY SPRAY, SR 998, M SEAL, FEVI QUICK, VARNISH, NAILS WIRE STEEL, ABRASIVE CLOTH EMERY

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - repairing work of 210 iron stopper welding paint and radium work complete work; MS iron stopper repairing; Service Provider

Supply and Fabrication and Fitting of 2 No of canal Escape Shutter gate in Godhna tank LBC Canal under Sub-Division Chicholi WRD Div. Betul Dist. Betul.

Enquiry for Fabrication and pasting with radium both Side and transportation and fixing of substation name board at various EHV Substation under 400KV Testing Division MPPTCL Nagda.

CO2 AND ARGON MIX GAS, 20 percent CO2 AND 80 percent ARGON GAS FOR WELDING APPLICATION.SUPPLY TO BE DONE IN SUPPLIERS OWN CYLINDERS.AS PER TECHNICAL SPEC FBM TOOLING TS13 REV02.

Welding Electrodes for Bus Body Building Parts as per IS 814:2004 (with Latest Amendments) (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/6234229 Dated : 15-05-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 126976.5 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Erection, fabrication and commissioning work of mechanised opening of strata bunker with R.C.C.(Slider with power pack) at 56L/BD at Tawa-I Mine of WCL, Pathakhera Area.

Work for Labour charge for fabrication of 11 KV V cross arm and 11 KV Top clamp using MS Angle 65x65x6 mm under Various estimate under DMS Scheme

SPRAY THROTTLE BODY, AC GAS BOTTLE, PLY WOOD GEN PURPOSE, SHEET CELLULAR, LEATHER CLOTH BLACK, ELECT WELDING ROD, STAR COUPLING, PIPE HIGH PRESSURE, FUEL PIPE, FUEL FILTER, OIL FILTER, MOUNTING BUSH

LEATHER LEG-GUARD FULL SIZE, AS PER SPECIFICATION NO. : FBM/TOOLING/TS-11, REV-01., LEATHER HAND GLOVES FOR WELDING OPERATION, AS PER SPECIFICATION NO. : FBM/TOOLING/TS-02, REV-02.

Custom Bid for Services - Works Contract for Fitting, Welding Dressing & Testing Runner & its Lybringths Complete Work As Per Docket/Job Cards for Various Projects Similar Category Manpower Outsourcing Services - Minimum wage

Contract for Overhauling of Valves, Replacement of Pipes bends Reducers,Painting and Misc.Steel fabrication etc TMD 5X200 MW Unit ST 1and 2X500 MW Units of Stage II NTPC Singrauli

Design drawing fabrication, supply erection and commissioning of Trash Rack in front and top side of sluice gates 20 nos minor tanks and 01 medium tank in Anooppur District.

Providing, fabrication and supply of stopdam gates size-1.80m x 3.50m-8 Nos (each gate shutter size 1.8m x 0.7m - 5 nos) for Ramjankhedi Barrage of WR Division, Ujjain.

TAPE ADHSV PVC 0.125X20MMX25M, TORCH CUTTING GAS SET, REGULATOR PRESSURE DBL STGE F OXYGEN, REGULATOR PRESSURE SNGL STG F ACYTELENE, NOZZLE TORCH GAS CUTNG 1 32IN, OIL SEAL 25x52x10, STEEL WELDING ROD

Fabrication of Hut type 0.5mm Profile Sheet Shed, Construction of CLP for TRG of Troops, Kota Stone work on top seating at CLP, Tiling work at CLP, PCC Base Work

Design, drawing, fabrication, supply erection and commissioning of Trash Rack in front and top side of sluice gates 11 nos minor tanks and 02 nos medium tank in Singrauli District.

Cleaning of weeds from facultative ponds i/c grass, surface dressing and Fabrication, Providing and Fixing of typical information board work in the compound at Badwai Sewage Treatment Plant, Bhopal

WIRE BRUSHES 3 ROW FOR WELDERS SS (AS PER BHEL SPEC), WIRE BRUSHES 4 ROW FOR WELDING SS (AS PER BHEL SPEC), WIRE BRUSHES 5 ROW FOR WELDERS SS (AS PER BHEL SPEC)

Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6656588 Dated : 08-09-2025 Bid Document 1/7 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 60 Evaluation Method Total value wise evaluation Arbitration Clause Yes ( Arbitration clause document ) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 16 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : MUNITIONS INDIA LIMITED Munitions India Limited, Ordnance Factory Itarsi, Distt. Narmadapuram, MP 461122 (Munitions India Limited Ordnance Factory Itarsi Mp) 2/7 Splitting

Custom Bid for Services - excavated in all kind of soil, Custom Bid for Services - Misc Works Repair, Custom Bid for Services - Loading unloading transportation, Custom Bid for Services - Miter bend fabrication

AS PER NIT including operation and maintenance for 05 years

AS PER NIT

Plywood general Purpose wwr 18MM, Sheet Cellular 37 MM Thick 2Mx1M, Spray Cleaner, Anabond AL 673 350 GMS, Ect Rodes Welding Steel Mild Genearl Purpose, Quick Fix, M Seal, Metal Cleaner and Rust remover

Air Hoses as per IS 446:1987 (Q3), Rubber Welding Hoses as per IS 447 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Custom Bid for Services - Works contract for Fitting, welding, finishing, dye penetrant testing, air testing, proof marking and identification of Capacitor Boxes covering Standard designs and drawings of BHEL, Bhopal Similar Category Support Services

Custom Bid for Services - Works-contract for Fitting, welding, finishing, dye penetrant testing, air testing, proof marking and identification of Capacitor Boxes covering Standard designs and drawings of BHEL, Bhopal Similar Category Support Services

Technical Training Combat Vest, Technical trg cmouflage tape, Technical trg gloves, Technical trg face paint, Technical trg information boards with stands, Digital target sheets, Technical trg target sheets, Technical infrastructure fabrication material

APRC on MESSSR2020 for Civil Maintenance Works, including masonry,joinery,roof repair (includingvalleygutter,rainwaterpipes ) concrete work, water supply, sanitary, fabrication, and connected works in Store buildings and nearby area in Filling Area

Work of Fabrication of 109800 no. of roof bolts from 20mm TMT rod (360) roof bolts/day at Regional Workshop, Pathakhera Area within a span of one year having 305 working days.

Online Tender for the Quantity Contract of Mobile Medical Van on turnkey basis (BASE VEHICLE, FABRICATION and MEDICAL EQUIPMENT) to be supplied and installed at Various Hospitals of Government of Madhya Pradesh

FIRE VEHICLE CHASIS TATA 912 LPK TWIN TYRE WITH AS PER ACCORDING TO DRDO RULE FABRICATION 4500 LTR TANK AND 500 FOAM TANK AND ALL ACCESSORIES 4 FIRE SUIT AND WIRELESS SET COMPLETE

DESIGN, CONSTRUCTION, FABRICATION, SUPPLY, ERECTION, TESTING, COMMISSIONING OF EFFLUENT TREATMENT PLANT OF 5,10 AND 30 KLPD CAPACITIES FOR VARIOUS MINI DAIRY PLANTS AND CHILLING CENTERS SITUATED IN DIFFERENT CITIES OF MADHYA PRADESH STATE.

Casting, machining and assembly of Cast Steel Rollers, Erection work of gates and its embedded parts and Fabrication, supply, erection and commissioning of Railing Decking of CR gate size 3.15m x 1.80m 2nos.

Plywood for General Purpose, Sheet Cellular 25MM, Sheet Cellular 37MM, Sheet Cellular 6MM, Electrodes Welding Steel Mild, Cable Electrnic Copper Coductor 4MM, Cable Elect D3 PVC Single, Paint RFU Olive Green, Cable Elect ATC Elastomer Insulated

SODIUM HYDROXIDE, AC GAS BOTTLE, ELECTRIC WELDING ROD, WD40 SPRAY, DOUBLE TAPE, TIE, SOLDER BRAZING, FLUX SOLDERING PASTE, NYLON STRAPPING, STEEL ANGLE IRON, PLY WOOD, LEATHER CLOTH BLACK, TAPE COTTON, LT WIRE, FEVIQUICK, WIRE STEEL SPRING

Square Pipe 1 Inch x 1 Inch x 2mm, Cutting Disk 14 Inch, Welding Rod, Cutting Disk 4 Inch, Round Pipe 1.5 Inch x1.5 Inch x 2mm, Square Pipe 0.5Inch x 0.5 Inch x 2MM, Feviquick

Rechargeable mini digital protractor for Angle measurement, Right angle clamp corner clamp, Rotary magnetic earth clamp, Magnetic welding holder clamp set, Magnetic tray size 140x240 mm, Titanium coated HSS steel large step cone drill bit set

CUTTER BLADE, SEAT BIT, M SEAL, DASH BOARD POLISH, FRENCH CHOWK POWDER, DASH BOARD PERFUME, VEHICLE SPARY, SELF DRILL SCREW, TUBE LESS VALVE, STEEL WELDING ROD, WATER DILEVARY PIPE, PITAL POLISH, ELECTRIC AIR PUMP, DRILL BIT

Structural Fabrication Hut, MS Square Pipe for pillars, MS Square pipe for purling, Pre painted galvalume profile sheet, Nut bolts and fasteners, Civil and foundation work, PCC Base work 3inch to 4 inch thickness

WORK FOR FABRICATION, SUPPLY, ERECTION, TESTING AND COMMISSIONING OF WORK FOR REPAIR AND MAINTENANCE OF 35 HP, 1000RPM SLIP RING INDUCTION MOTOR OF 70 TON GANTRY CRANE INSTALLED AT R.A.B.L.S. PROJECT BARGI NAGAR JABALPUR

M2 BOF 4018799 DEVELLING JACK TRBE WELDING, M2 IAN 300 SA PULLEY DRIVE, M2 IAN 299SA COOLER OIL FOR HYDRAULIC SYSTEM, M2 BOF 5046776 SCREW, M2 BOF 5008229 CAN LUBRTICATING OIL, M2 BOF 6104473 ROD ACTUATING LEVER

Solar system RESCO modal

Fevicol SR 998, Plywood for General Purpose, Sheet Cellular, Paint RFU G Yellow, Elect Welding Steel Mild General, Cable Electric Copper Conductor, Cable Elect D3 PVC Single, Adhesive Synthetic resin Hardner, Cable Elect ATC Elastomer Insulated, Tape Insulation

Industrial Safety Helmet (V2) as per IS 2925 (Q3), Rubber Gloves for Electrical Purposes as per IS 4770 (Q3), Welder Gloves or Gauntlets as per IS 2573 (Q3), Industrial Safety Gloves - Leather and Cotton (Q3), Welding apron (Q3)

Custom Bid for Services - Works contract for Fitting, welding, finishing, dressing, cleaning, sorting, flame- cutting, Marking-off, die testing, air testing, identification and final inspection of Radiators covering Standard designs and drawings of B.. Similar Category Support Services

Casting, machining, assembly of Cast Steel Rollers, Erection work of gates and its embedded parts and Fabrication, supply, erection, commissioning of Railing Decking of Escape gate size 3.15m x 1.80m 1no for Urmil main canal.