Fabrication Tenders in Tamil Nadu

TTPS Mech II BM Unit II Removal fabrication erection of damaged trough provided for collecting water from 24 Mtr elevation above attemperation station feed water station and replacing the supporting structurals in Unit II Boiler

Work Contract for Electrification of Control room of newly proposed Madhavaram Radiance 33 11kV Indoor SS and Labour Transportation works of Breaker Fabrication and erection works of Adaptor GI tray Battery battery Charger Earthing arrangemeTransp

MTPS I BM AOH 2025 Unit I Boiler pressure parts Cutting and removing of heavily wornout rear arch room roof plate Supply fabrication and erection of HR Sheet at rear arch room and allied works

TTPS Mech II BM Unit I Removal fabrication erection of damaged trough provided for collecting water from 24 Mtr elevation above attemperation station feed water station and replacing the supporting structurals in Unit I Boiler

Design, Fabrication, Supply & Installation of Blue colour ACP Display Board of size 11 ft. x 3 ft. (33 sq.ft) with Frame and 3D Lettering as "CUSTODY STORES" made of acrylic sheet. Note: Item to be

Fabrication and supply of MS racks for MW section and cupboard as per annexure and drawing enclosed. Item to be supplied with warranty certificate of 2 years from the date of supply. FIRM'S OFFER :-MA

Providing SS structure plinth foundation cable duct allied civil works and supply of iron steel materials fabrication of one no. additional 8MV, 33 11 KV power transformer at Irudukottai in Krishnagiri EDC under DDUGJY scheme

Providing SS structure plinth foundation cable duct allied civil works and supply of iron steel materials fabrication of one no additional 8MVA 33 11 KV power transformer at Perugopanapally in Krishnagiri EDC under DDUGJY scheme

Providing SS structure plinth foundation cable duct allied civil works and supply of iron steel materials fabrication of one no additional 8MVA 33 11 KV power transformer at Mudukurukki in Krishnagiri EDC under DDUGJY scheme

Custom Bid for Services - CPCLS25015 Fabrication Erection and Commissioning of Stainless Steel Steam Coils at Plant 210 SRU Train B Sulphur Pit Similar Category Piping Erection Service Operation And Maintenance Of Other Machines And Plants

OFF GRID SOLAR POWER PLANT, ADVANCE ELECTRICAL WORK STATION, ARTIFICIAL RESPIRATION FOR SAFETY PRACTICE, MOTOR AND TRANSFORMER PROTECTIVE DEVICE, CT AND PT WORKING MODEL, SMART WRITING BOARD, DC ARC WELDING RECTIFIERS SET WITH ALL ACCESSORIES, GMAW ... GMAW WELDING MACHINE, ... GTAW WELDING MACHINE ... AND WELDING MACHINE

GAS WELDING GOGGLES, LEATHER APRON 24X36 INCH, CANVAS HAND SLEEVES, LEATHER HAND SLEEVES, LEATHER LEG GUARDS, PVC APRON 24X36INCH, WELDING HAND SHIELD

ARGON GAS REGULATOR WITH FLOW METER AS PER IS: 6901 (Q3), WELDING HELMET WITH 11 A SHIELD GLASS FOR TIG WELDING (Q3)

Maintenance works in 22KV 415V HT LT supply system and welding supply system attending defects and routine maintenance works in electrical installation under jurisdiction of site fuse of call section for the period from 08.10.18 to 31.03.19.

Maintenance works in 22KV 415V, HT LT supply system and welding supply system attending defects and routine maintenance works in electrical installation under jurisdiction of Site Fuse Off Call section for the period from 08.04.19 to 30.09.19.

BOHLER BRAND DMV 83KB, WELDING ELECTRODE AWS NO

Custom Bid for Services - CPCLY25391 Revamp of Condensate Recovery System at OPH - Mechanical site works for equipment erection and pipeline fabrication & erection works at CPCL Manali Similar Category Piping Erection Service Repair, Maintenance and Installation of Plant Systems/Equipments

Blow Pipe for Welding and Cutting as per IS 7653 (V2) (Q3), Acetylene Pressure Regulator as per IS 6901 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 10 Bid Number : GEM/2026/B/7084236 Dated : 08-01-2026 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Acetylene Pressure Regulator as per IS 6901 Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Improvement works to damaged window by replacement of broken glass, replacement of entire patty between glass and steel structure, damaged aluminum door and window and allied works at Vaigai power house

REPAIRS MAINTENANCE WELDING PAINTING LETTERING SERVICES TO EXISTING LT PANELS FEEDER PILLAR BOXES POLES AND ALLIED ITEMS AND REPAIRS REPLACEMENT OF DB MCCB MCB AND CERTAIN INTERNAL ELECTRIC SUPPLY WORK IN MARRIED AND OTM ACCN AT INS RAJALI ARAKKONAM

MTPS I BM Unit II Boiler Pressure Parts AOH 2020 Reconditioning of worn out damaged fin welding Renewal of worn out damaged peephole door and manhole door assembly header shield plates overhauling of peep hole manhole door assemblies etc

MTPS I Mill Plant Unit III Dismantling and assembling of Coal pipe bends ceralin bends and Patch welding the eroded portions of Coal bends and pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2021 22

Supply of jack bolt holder, jack bolts and nuts sets 24 nos., cutting and removal of existing damaged jack bolt and nut with holder, Renewal of jack bolt holders, jack bolt and nuts by IBR welding in STG condenser

MTPS I Mill Plant Unit I Dismantling and assembling of Coal pipe bends ceralin bends and Patch welding the eroded portions of Coal bends and pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2021 22

MTPS I BM AOH 2021 22 Unit IV Flue Gas duct B side Renewal of Deflector plates renewal of duct supports renewal of guard plates over the expansion joints renewal of splitter plate and patch welding the eroded portion

TTPS Operation Circle MPM II Unit IV Attending to preventive and breakdown maintenance works like renewal of wornout grinding elements ring roll setting carrying out patch welding in coal pipes etc from the date of entrusting the workupto 31.03.21

MTPS I BM AOH 2021 22 Unit IV Flue Gas duct A side Renewal of Deflector plates renewal of duct supports renewal of guard plates over the expansion joints renewal of splitter plate and patch welding the eroded portion

MTPS I M I Circle CA FP Replacement of worn out puncture Headers pipelines in Hydrant Emulsifyre system by dismantling and erection of various sizes pipelines patch welding replacement of fire hydrant post removing of slabs and allied works

ECHP-II- Dynamic balancing under cutting, welding stress reliving machining the DE NDE side bearing steps and replacement of both side bearing in Secondary Crusher-1B HT motor Kirloskar make, 820 KW, 6.6 KV, 1483 RPM, Sl.no.3900803-2

MTPS I MP Unit I Hot air ducts welding of eroded and wornout portion of hot air duct joints in six mills Renewal of insulation and GI sheets in mill intake areas of hot air ducts horizontal portion etc

MTPS I Mill Plant Unit IV Renewal of damaged coal pipe bends ceralin bends and patch welding the eroded portion of coal bends and pipe lines between Mill out let elbow and fuel inlet elbow during AOH 2020 21

UNDERFRAME DETAIL ITEMS, WELDING PARTS AND SHEET ASSEMBLY FOR TRAIN SET MC 1. 89011004, COL-I, ALT 'j' - 1 No, 2. 89011005, COL-I, ALT 'e' - 1 NO, 3. 89011008, COL-I, ALT 'c' - 1 NO, 4. 89011031, COL-

UNDERFRAME DETAIL ITEMS, WELDING PARTS AND SHEET ASSEMBLY FOR TRAIN SET MC 1. 89011004, COL-I, ALT 'k' - 1 No, 2. 89011005, COL-I, ALT 'e' - 1 NO, 3. 89011008, COL-I, ALT 'd' - 1 NO, 4. 89011031, COL-

One coach set of Side wall Frame Work, Welding Parts and Carline for LACCN Amrit Bharat (829) Shells to Drg Nos 1)Frame Work to Drgs No 82914013, Alt 'Nil' - 1 No 82914015, Alt 'Nil' - 1 No Items in

ONE COACH SET OF ROOF ASSEMBLY FOR AMRIT BHARAT LSCN/PP 2 (755) COACHES.TO DRG No 1. 75516001 Alt 'Nil'.- 1 No, 2. End roof to Drg No 97216008, Alt 'Nil' - 2 Nos,---- 3. Welding Pin arrangement to Drg

ONE COACH SET OF ROOF ASSEMBLY FOR LSCZ COACHES TO DRAWING NUMBER 73916001, COL-I, ALT 'a'- 1 NO AND END ROOF ASSEMBLY TO DRAWING NUMBER 58116066, ALT 'f', COL-I - 2 NOS. WELDING PIN 676 NOS TO DRG.NO

Procurement of Electrode Cap Holder as per ICF Drg.no. ICF/M&P/2587 Alt a (Dia 25x157 mm) for Resistant Spot Welding Machine of M/s IGM, Austria make. NOTE: (1) Sample unit has to be cleared for fitme

Set of Trolley wheels suitable for ADOR Make Champ T 400 model, IGBT MMA welding plants. (i). Hard Polymer wheel (front swivel wheel), Wheel size: Dia 63 x W 22 x B 6 mm, swivel castor, make: ADOR, Pa

ONE COACH SET OF WELDING PARTS ON LWACCW SIDEWALL RH AND LH TO ICF DRG.NOS. 1)59314022 COL-I ALT " e " - 1 NO. AND 2)59314023 COL-I ALT " f " - 1 NO. Special Condition : To prevent damage during tran

Set of welding electrode consists of two items as given below (1) 4mm electrode of model LH 106 - 40 Kgs/set (2) 2.5 mm electrode of model LH 106 - 20 Kgs/set Make: ADOR fontech only. FIRM'S OFFER :-M

Set of Trolley wheels suitable for ADOR Make Champ T 400 model, IGBT MMA welding plants. (i). Hard Polymer wheel (front swivel wheel), Wheel size: Dia 63 x W 22 x B 6 mm, swivel castor, Make: ADOR, Pa

1.0 MM TWIN WIRE MIG/MAG WELDING COIL OF ER308L GRADE SUITABLE TO WELD STAINLESS STEEL SUCH AS 18Cr/8 Ni TYPE CONFORMING TO SPEC. AWS A5.9/5.9M:2017 OR LATEST. COIL SHOULD BE SUPPLIED IN TERMS OF SPOO

ONE COACH SET OF SIDE WALL ASSEMBLY AND DOOR CUT OUT ASSY. FOR TRAIN SET DTC COACHES TO DRG. NOS. 1) SIDEWALL ASSY TO DRG No. 88914001, ALT a - 1 NO. SIDE WALLS SHALL BE ASSEMBLED WITH WELDING PARTS

One Coach set of Frame Work, Carline and Welding Parts for Amrit Bharat LWS/PP2 (754) to Drg Nos. 1. Frame work to Drg Nos 75414009, Alt 'Nil' - 2 Nos, 75414011, Alt 'Nil' - 2 Nos. Details in COLUMN-I

Mobile flash butt welding of rails for (1) AJJ-JTJ section-CTR(S)-36.495 km (2) AJJ-JTJ section-TRR(S)-0.908 km (3) CGL-AJJ section-CTR(S)-6.797km and (4) AJJ-RU section - TSR(S)-12.015 km.

Comprehensive Annual Maintenance Contract (CAMC) with calibration for Impact testing Machine (Make: FIE & Sl.No. 20231054-6) INV. No.9373 available in CMT/Welding Lab/Shell for a period of 5 years by OEM's authorized dealer M/s.FHI Equipments, Chennai.

NCTPS I SE MI Circle R M 24 25 MPM Dn Renewal of eroded deteoriated MS Chequered plates and supporting steel structures of approach platform in Unit I II III mill floor at 2.62 mtrs level

Supply, fabrication and erection of MS flat, MS Rod for earth mat and earth bore for 230 KV and 110 KV portion etc., for establishment of 230 KV SS at existing 110 KV SS at Vembakkam

Supply, Fabrication, galvanizing, erection of Pr. Tr. gantry, stringing of strung bus, Providing earth pit, providing cable duct, plinths for Power Transformer and breaker, and Road work for enhancement of 33/11KV existing Power transformer capacity

ICHS Dn Design Engineering Supply fabrication and erection of additional trestle with bracings of 6B1 with pile foundation for supporting the existing severely corroded weaken Trestle No 6A of conveyor 12 A B on emergency basis