Fabrication Tenders in Tamil Nadu

Selective Replacement of worn out steel structures Fabrication, Selective Replacement of worn out steel structures Erection, Selective Replacement of worn out steel structures Dismantling, Selective replacement of worn out chequerred plates or MS ... gratings Fabrication , ... assemblynt, Fabrication of ... NB, Fabrication of ... NB, Fabrication of ... NB, Fabrication of ...

Soot blower Hanger Support assembly Fabrication

Fabrication and Supply of WELDED BIFURCATE

BOV fabrication repair work zone-VI

Fabrication repair Work of 24 nos.BOV

Fabrication and Supply of U Rod

MTPS I Mill Plant Unit II Renewal of damaged Coal pipe bends ceralin bends and Patch welding the eroded portions of Coal bends and pipe lines between Mill Outlet Elbow and Fuel Inlet Elbow during AOH 2020 21

MTPS I TM Unit IV Changing the eroded reducers expanders pipes and bends and changing the defective eroded 1 inch and 2 inch valves by IBR and Non IBR welding in Unit IV during Annual Overhauling 2021 22

MTPS I BM Unit IV Annual maintenance 2021 22 Cutting and Patch welding on the eroded portion of the FG duct from ECO outlet to APH inlet renewal of Support Beam both inlet and outlet of APH hoppers

NCTPS I Operation Circle CA Dn RWPH Attending to preventive and breakdown maintenance works in RWPH Such as welding painting Overhauling of pumps etc for a period of One Year from the date of taken over of site

TTPS ES Circle EM II Maintenance works in 22KV 415V HT LT supply system and welding supply system attending defects and routine maintenance works in electrical installation under jurisdiction of Site Fuse Off Call section for the period

TTPS Mech II BM Unit I II III Strengthening of weak welding joints of structural supports and renewal of damaged corroded structurals and hand rails from 0 Mtr to 52 Mtr elevation of Unit I II III Boiler

TTPS Operation Circle CAD Water leak arresting by patch welding clamping the punctured portion of various sizes of Sea Water, service water and Raw water pipe lines and replacement of 300,200,150NB pipelines and overhauling of 100NB gate valves

NCTPS I Operation Circle CA Dn RWPH Attending to preventive and breakdown maintenance works in RWPH Such as welding painting Overhauling of pumps etc for a period of 6 months from the date of taken over of site

MTPS I TM Unit IV Changing the eroded reducers expanders pipes and bends and changing the defective eroded 1 inch and 2 inch valves by IBR and Non IBR welding in Unit IV during Annual Overhauling 2021 22

TTPS Operation Circle MPM II Unit V Attending to preventive and breakdown maintenance works like renewal of wornout grinding elements, ring roll setting, carrying out patch welding in coal pipes etc., for a period from 01.04.2024 to 31.03.2025

TTPS Operation Circle MPM II UnitV Attending to preventive and breakdown maintenance works like renewal of wornout grinding elements ring roll setting carrying out patch welding in coal pipes etc from the date of entrusting the work upto31.03.22

NCTPS I Operation Circle CA division RWPH Attending to preventive and breakdown maintenance works in RWPH such as welding painting Overhauling of pumps etc for a period of one year from the date of handing over of site

REPAIR TO ALL TYPES OF STEEL FURNITURE INCLUDING WELDING, POLISHING, PAINTING ETC AT OTA, MH, 12 MADRAS AND OTHER UNITS AND REPAIRING, POLISHING, PAINTING OF TP/FD, PATTERN FURNITURE INCLUDING REPLACEMENT OF ACCESSORIES AT GENTLE MEN CADETS ACCN

TTPS Operation Circle CAD Water leak arresting by patch welding clamping the punctured portion of various sizes of Sea water, service water and Raw water pipe lines and replacement of 300,200,150NB pipelines and overhauling of 100NB gate valves

MTPS-I Mill Plant Unit III Dismantling and assembling of Coal pipe bends and Patch welding the eroded portions of Coal bends ceraline bends pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2023 24

TTPS Operation Circle MPM II Unit IV Attending to preventive and breakdown maintenance works like renewal of wornout grinding elements, ring roll setting, carrying out patch welding in coal pipes etc., for a period from 01.04.2024 to 31.03.2025

SUPPLY OF ONE SET OF ALUMINIUM INNER FRAME ( SINGLE PIECE DESIGN WITHOUT ANY WELDING JOINT) WITH HARDWARE TO DRG. NO.LSCN/PP2 (755)-5-4-002, COL-I, ALT-j FOR AMRIT BHARAT. (Warranty period: Up to 30 m

One Coach set of Frame Work, Carline and Welding Parts for Amrit Bharat LWS/PP2 (754) to Drg Nos. 1. Frame work to Drg Nos 75414009, Alt 'a' - 2 Nos, 75414011, Alt 'Nil' - 2 Nos. Details in COLUMN-

SUPPLY OF ONE SET OF SPARES CONSISTS OF 03 ITEMS SUITABLE FOR LEISTER MAKE GHIBLI MODEL HOT AIR WELDING GUN 230 VOLT/2000 WATTS. QTY: 01 SET. ONE SET CONSISTS OF 03 ITEMS AS FOLLOWS: 1. ELECTRONIC CI

2% Ceriated Tungsten Electrode for TIG Welding, size : 2.4 mm. Dia x 150 mm. Length in manufacturer's sealed packed container of M/s. Plansee Austria make or M/s. Miller Weld/USA make or M/s. Gas Weld

CO2 WELDING TORCH ,400A CAPACITY, SELFCOLLED,EURO CONNECTED 3M LONG OF M/SESAB MAKE TO MODEL NO PSF-405 OR ITS EQUIVALENT OFM/s OTC DAIHEN, M/S KEMPPI OR TBI INDUSTRIES SUITABLE FOR 1.2 MM SOLID AND

One Coach set of Frame Work, Carline and Welding Parts for Amrit Bharat LSCN/PP2 (755) to Drg Nos, 1. Frame work to Drg Nos. 75514008, Alt 'Nil' - 1 No. 75514012, Alt 'Nil' - 1 No. Details in Column

ONE COACH SET OF PUSH-PULL RAKE (974) LS SIDEWALL FRAME WORK, CARLINE, WELDING PARTS, DOOR CUT OUT AND LAVATORY SIDEWALL TO DRG NOS I) FRAME WORK AND BACK PIECES TO DRG Nos. 1. 74214005, Alt 'd' - 2

CONSUMABLES FOR ROBOTIC WELDING MACHINE INV 2546 IN SHOP 23 DETAILS OF THE ITEMS & QTY. are as follows 1) Gas nozzle TWIN 82.5 mm part no 60A912 - 12 nos 2) Contact Tube 1.2 part no 60A167 - 300 nos

Earth clamp (Ground) "C" type 600Amps@60% and 300Amps@100%duty factor as per EN-60974-13 CE suitable for 70-95 Sq welding cable. Model-EC CT 600 Make- SWPS/ESAB /ADOR /MESSER . Offer accepted make: S

ONE COACH SET OF WELDING PARTS ON ROOF FOR LWACCW COACHES TO DRG. NO. (593)LWSCWAC/EOG-1-6-006, COL-I, ALT 'a' Special Condition : (ALL ITEMS TO BE SUPPLIED LOOSE TO BE SUPPLIED IN COACH SET)

MIG-MAG Welding machine 400amps package consist of 1.Auto K 400 power source, 2. Servo I wirefeeder 5 meter, 3. Mig torch PSF- 415, 3 meter, 4. regular co2 single stage, 5. Co2 heater with core assy

2% Ceriated Tungsten Electrode for TIG Welding, size : 2.4 mm. Dia x 150 mm. Length in manufacturers sealed packed container of M/s. Plansee Austria make or M/s. Miller Weld/USA make or M/s. Gas Weld

SUPPLY & APPLICATION OF SEALANT AS PER ANNEXURE TRAIN SET-T (Rev-01) dated 12.10.2023 ON VB TS COACHES ROOF, SIDE WALL & END WALL COMPONENT AREAS AT WELDING JOINTS AS PER Drg No (329) ICF/SK3-1-6-074

Double Action Rail Weld Trimmer POWER PACK VERSION FOR A.T. WELDING RDSO Specification no.: TM/SM/9 dt. 16.08. 1991(Second Revision, 2022). Suitable for 52kg and 60kg Rails, Shear Blade for 52kg and 60kg each One set.

Customized AMC/CMC for Pre-owned Products - Supply of Welding Rods and Cutting Wheels for One Year Contract at Chennai Airport; As per the scope of Work; Annual Maintenance Contract (AMC); As per the scope of Work; No

Facility Management Services - LumpSum Based - Industrial; Fabrication and Erection of GI ducts and allied items in Ventilation System as per specifications at MAPS Site; Consumables to be provided by service provider (inclusive in contract cost)

Labour charges for fabrication, erection of structures including supply of MS materials, erection of equipments and earthing etc., for enhancement from 2x16 MVA to 1x25MVA and 1x16MVA Power Transformer at Sivakasi ESI 110/33KV SS

TTPS Operation Circle CAD CWPH II Dismantling the badly worn out working platform and fabrication and Erection of new M.S Structural working platform for 1200mm butterfly valve in CWPH II at Unit IV and V

Supply, Fabrication and erection of MS Channel, Angle, MS flats and MS Rod, provision of earth raiser, erection of 230KV equipments, etc., for establishment of 230 KV SS at existing 110 KV SS at Vembakkam

Fabrication Construction and Erection of Greater Chennai Corporation Pavilion including Supplying of New Models and Interior Design Video Devices for 50th India Tourist and Industrail Fair 2026 at Island grounds in dn 60 Zn 05

Supply, Fabrication and Erection of Steel materials, Earthing Steels, Paintings, Handling and Erection of Department Equipments and materials, Supply and erection of Sub Station accessories for 110 KV Bay Extension work at Sakkottai (Kumbakonam) 110

Fabrication Supply of 200 NB SS316Gr SCH 80 seamless pipes along with fittings of unit III seal water lines taken from stage III filtered overhead tank in unit IV and V Ash water pump house

TTPS Operation Circle CAD Dismantling the badly corroded portion of MS Structural arch of pipe supports and fabrication and erection of new structural arch of pipe supports near Unit IV and V condenser out fall

MTPS I Mill Plant Unit II Fabrication of various length of dia 40 NB cooling water pipe line with flanges and assembling in the cooler cover of mill 2A to 2F during AOH 2023 24

TTPS Mech II BM Unit III Removal fabrication erection of damaged trough provided for collecting water from 24 Mtr elevation above attemperation station feed water station and replacing the supporting structurals in Unit III Boiler

Replacement of Damaged Penstock pipe line by Supply, Fabrication, Erection of 220 meter Penstock pipe line, reconditioning of Butterfly valve at valve house, Overhauling of expansion joint, rectification of defective joints, painting at Suruliyar PH

Extension of control room, Providing foundation concrete for structure, equipment plinths, Supply, Fabrication and Erection of Steels, Earthing, equipments, etc., and dismantling for the provision of 110 KV feeder breakers at Thuraiyur 110 KV SS

MTPSI Mill Plant Unit I Fabrication of MS bend 10 deg 15 deg 22 deg 23 deg 27 deg to Suit dia 508 mm 12 70 mm thick coal pipe line during AOH 2026 27