Fabrication Tenders in Tamil Nadu

Facility Management Services - LumpSum Based - Industrial; Maintenance Repair Fabrication and Installation work of Exhaust Fans at MAPS for two years 2025 27; Consumables to be provided by service provider (inclusive in contract cost)

Supply, Installation and Commissioning of 2 nos of 8.2 x 4.4 Feet Active Led Video Wall including all fabrication frames and accessories as per the specifications at Area-II and Area-XII, CMWSSB

Restoration of Damaged Coal Bunker 3D Coal mills Coal Feeders Coal Pipes Mill Motors Electrical and Instrumentation accessories other structures and pipe lines including fabrication supply erection testing and commissioning in Unit III

MTPS I M II OAHS Overhauling of Scrapper Feeders 3A2 and 3B2 in Bottom Ash Hopper Unit III and also fabrication of 300NB Eco Hopper Drain line bend for Unit III and IV

NCTPS 1 Operation Circle CA CWPH DM Plant Strengthening of wornout damaged bottom and curved shell plates at the bottom of contact tank by fabrication of M S Plate Rubber lining and painting

TTPS ES EM III Providing of New service air line and fabrication and Erection NGR Unit supporting frame in ESP IV ESP V and common Service transformer Yard in Unit IV and V

TTPS Mech II AHP Dismantling the existing wornout structural supports fabrication erection and painting of new structural supports in Ash slurry disposal pipe line platform in Unit IV V ash slurry pump house

TTPS Mech II AHP Dismantling the existing wornout MS structural supports fabrication erection of newly fabricated structural support works in Ash water pump house and seal water filteration plant in Unit IV V

TTPS Operation Circle CAD Dismantling the badly worn out platform with structure fabrication and Erection of new M.S Structural supports with platform near Air released valves of CWPs of unit IV and V

Construction of cable duct and renovation of existing control room building and supply, fabrication and erection of steel structuresand other allied works in the existing Piratiyur 230 KV SS in Trichy Operation Circle.

NCTPS I Operation Circle O and E division Fire Fighting Unit III Design Fabrication Erection of new detector network for inside Cable Gallery at 0 mtr elevation and 10 Point 5 mtr elevation

Replacement Fabrication and erection of vertical lift gate shutters in old existing spillway vent no. 1 2 3 with hoisting and protection arrangements in Manimuktha Nadhi dam in Vanapuram taluk of Kallakurichi District

Supply and fabrication of stainless steel stand, customized fire detector mounting plate, stud and screws, customized clamp for wires and power distribution boxes as per the technical specifications at FRFCF site, NRB, Kalpakkam

NCTPS I Operation Circle O and E division Fire Fighting Unit II Design Fabrication Erection of new detector network for inside Cable Gallery at 0 mtr elevation and 10 Point 5 mtr elevation

TTPS Operation Circle CAD Fabrication of MS bed frame and replacing the wornout bed frame in Auxiliary cooling water pump 4C 4D sea water booster pump 4C 4D in unit IV A.C.W system

MTPS I BM UNIT IV Boiler Pressure parts Fabrication erection of Hoist structure at 19 mtr elevation and 28 mtr EF elevation all corners of the Boiler for handling of Coal nozzle assemblies

TTPS Operation Circle CAD Fabrication of oil chamber cover in 55 KW jyoti make storm water pump Motor Ratchet housing for oil chamber at storm water pump house unit I, II and III

NCTPS I Operation Circle O and E division Fire Fighting Unit I Design Fabrication Erection of new detector network for inside Cable Gallery at 0 mtr elevation and 10 Point 5 mtr elevation

SUPPLY,FABRICATION,ERECTION,CONNECTING AND COMMISSIONING OF APFC PANEL OF CAPACITY 50 KVAR EACH WITH 15 KVAR - 02 Nos AND 10 KVAR - 02 Nos. COMPRISING OF HOUSING,CAPACITORS BANKS,APFC RELAYS,MCCB / MC

MTPS I Mill Plant AC Plant Unit I Air Washer System Dismantling and Cleaning the W Type PVC Eliminators by using chemical and Re assembling Fabrication and erection of GI sheet trays etc

Labour Charges for Fabrication of student steel Dual Desk of size 1830mm (L) x 915 mm(W) Made out of 18G CR Sheet and ERW Steel Pipe of 18G with Powder Coating charges

3 Phase, 300A Portable welding Machine (Q3)

Leak arresting works in HRSG by welding

MTPS TM Unit III Rectification of CW box and Manual worn out door Fixing Bolt Seating area by Metal filling with welding surface finishing the welded portions of the fixing bolt seating area in Condenser front and rear sides of LHS and RHS Doors

Portable Single Operated Rectifier Type DC Arc Welding Set Suitable for Manual Arc Welding Process as per IS 4559 (Q2) MSE Exemption for Turnover Yes | Complete Startup Exemption for Turnover Yes | Complete Document required from seller Experience Criteria, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No Bid Number : GEM/2025/B/6622472 Dated : 29-08-2025 Bid Document 1/8 Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

MTPS I BM Unit III Annual maintenance 2024 25 Cutting Patch welding on the eroded portion of the FG duct from ECO outlet to APH inlet renewal of Support Beam both inlet and outlet of APH hoppers

TTPS Mech II TM I Break down maintenance of regenerative system welding of associated pipe lines in Unit I II III for the period of work on or after 08 04 2020 and upto 30 09 2020

NCTPS I Operation CA Dn RWPH Attending to preventive and breakdown maintenance works in RWPH such as welding painting overhauling of pumps etc for a period of one year from the date of taken over of site

Contract for Miscellaneous gas cutting and welding, Bloom cutting and manual billet charging activities, Thicken-end handling Band saw tube end cutting and salvaging activities in Hot mill, Equipment Scale cleaning and Scrap cleaning in Hot Mill

MTPS I BM Unit II Annual maintenance 2022 2023 Cutting and Patch welding on the eroded portion of the FG duct from ECO outlet to APH inlet renewal of Support Beam both inlet and outlet of APH

TTPS ES EM II Maintenance works in 22kV 415V HT LT supply system and welding supply system attending defects and routine maintenance works in Electrical installation under the jurisdiction of site Fuse off call section EM II

TTPS Mech II TM I Break down maintenance of regenerative system welding of associated pipe lines in Unit I II III for the period of work on or after 08 04 2020 and upto 30 09 2020

MTPS I Mill Plant Unit IV Dismantling and assembling of Coal pipe bends and Patch welding the eroded portions of Coal bends and pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2021 22

MTPS I Mill Plant Unit II Dismantling and assembling of Coal pipe bends and Patch welding the eroded portions of Coal bends and pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2022 23

MTPS I Mill Plant Unit III Dismantling and assembling of Coal pipe bends and Patch welding the eroded portions of Coal bends and pipelines between Mill Outlet Elbow and Fuel Inlet Elbow during Annual overhaul 2022 23

MTPS I CA CWS II Overhauling of flow control valve complete assembly and renewal of its worn out components and patch welding of FVC nozzle pipe in cooling Tower IV of stage II during AOH 2022 23

Web to drg. no. LE11317 alt a welded with top plate to drg. no. LE11319 alt a and painted with Red Oxide Zinc Chromate Primer Coating. Refer drg. no. LE11165 alt g or latest for welding specifications.

Hot air Gun with accessories consisting of 1).230V/2000Watts with schuko plug, SEV approved -01 nos. 2), Tubular nozzle (dia 37%A0mm) Dia 5%A0mm 01 numbers , 3), Sped welding nozzle 5%A0mm -01 nos Rec

Energy Saver Unit for Rail Weld Welding Set in Printed Circuit Board made up of Glass Epoxy Sheet thickness 1.8 +/- 0.1mm as per EWS drawing No. EW/WP/ES/07/2015 Dt.20.07.2015 enclosed. One Sample P

ONE COACH SET OF SIDE WALL ASSEMBLY AND DOOR CUT OUT ASSY FOR TRAIN SET TRAILER COACHES TO DRG.NOS. 1) SIDEWALL TO DRG NO. 89114001, ALT'NIL' -1 NO. WELDING PARTS AND CONDUITS TO DRG. NOS. 89114010, A

Earth Clamp(Ground) ''C'' type 600 amps @ 60% and 00 Amps @ 100% duty As per EN-60974 - 13 CE suitable for 70 - 95 Sq welding cable. Make : Messer, Ador, Esab or Equivalent. Make: SWPS, Model: EC CT

ONE COACH SET OF WELDING PARTS ON ROOF FOR LSCZ COACHES TO DRAWING NO LJ16160 COL-I ALT ' d ' ANX-6 ---- (ALL ITEMS TO BE SUPPLIED LOOSE ) Special Condition : SUITABLE PACKING TO BE DONE TO PREVENT DA

Procurement of i) Gas Flow Meter Flow Range 2 to 22 LPM suitable for C02 & Argon Gas, ii) Nipple Nut for DA Cutting Torch & iii) Tip cleaner for cleaning welding torch tip consisting of 13 Steel Ream

CO2 WELDING TORCH, 400A CAPACITY, SELF COOLED, EURO CONNECTED, 3M LONG OF M/s.ESAB MAKE TO MODEL NO.PSF-405 OR ITS EQUUIVALENT OF M/s.OTC DAIHEN, M/s.KEMPPI MAKE MODEL: FASTMIG/ PULSE 450 OR M/s.TBI I

SET OF ITEMS FOR WELDING, SET CONSISTS OF 2 ITEMS AS GIVEN BELOW: 1) SAFETY SPECTACLES TYPE GOGGLES WITH FOLDING SIDE CUPS, AS PER: IS:5983-1980, FOLDING SIDE CUPS OF WIRE MESH, ZERO POWER OPTHALMIC G

SHIELD GAS-MIXTURE FOR MIG/MAG WELDING PURPOSE CONSISTING OF 80% ARGON GAS TO SPECIFICATION IS 5760/1998 OR LATEST GRADE 3 & 20% CO2 GAS TO SPECIFICATION IS 307/1966 OR LATEST GRADE 1, FILLED IN CYLIN

SUPPLY OF WAP-7 LOCO CAB STANDARD PRE CUT INSULATED VINYL FLOOR MAT AS PER ELS/RPM DRG NO. M/ELS/RPM/SK-283. SINGLE PIECE (NO STICHING, NO VINYL WELDING) ELECTRICAL INSULATED AND FIRE RETARDANT, ANTI

GAS NOZZLE 1.6 MM SUITABLE FOR KEMPPI MIG/MAG WELDING TORCH MTP 350. PART NO. W004123 OF KEMPPI MAKE OR EQUIVALENT. NOTE- 5 NOS OF SAMPLE TO BE GIVEN FOR SUITABILITY BEFORE BULK SUPPLY Firms Offer Mak

CONTACT TIP 1.6 MM SUITABLE FOR KEMPPI MIG/MAG WELDING TORCH MTP 350. PART NO. 9876646 OF KEMPPI MAKE OR EQUIVALENT. NOTE- 5 NOS OF SAMPLE TO BE GIVEN FOR SUITABILITY BEFORE BULK SUPPLY Firms Offer Ma

ALUMINIUM ELECTRODE 3.2MM DIA ADOR FONTECH LH 409,OR ITS TECHNICAL EQUIVALENT IN MAKE: 1) ADORE FONTECH LTD, 2) L&T 3) ADVANI ORLICON 4) ADOR WELDING LTD 5) ESAB ONLY. Firms' offer: Same as above, Mak