Fabrication Tenders in West Bengal

Emergent fabrication of 09 (Nine) nos. Ladder (Type-1 and 2) and 05 (Five) nos. Lecture Stand podium for visit of VVIP under Malda Division, PWD during the year 2024-2025.

Fabrication and erection of MS structural Bridge used to cross 600 mm dia Rising main pipe line at Ochiven Pally under Panagarh Industrial Park W/s Scheme under DWSD, PHE Dte

Construction of a filling counter, flag hoisting altar and fabrication aluminium partition at newly constructed Composite Court Building (G 4) under Malda Division, PWD, during the year 2024-25 (Balance Work).

Supply, fabrication, painting, transportation and fitting of 14 nos. 6mtr. X 2mtr. iron gates at seven nos. UG sub-stations in R-VII and R-VIIA seam of 3n4 Incline, JPC.

Engaging outside contractual agency for different types of jobs at Fabrication Shop of Neamatpur Central Workshop on regular basis except Sundays and Holidays for a period of one year (301 days)

Supplying and fixing of cable (Additional) for connecting poles of compound lights and fabrication of support to icrease height of Feeder Pillar at P and T Quarter Compound at Ultadanga, Kolkata.

Transportation installation commissioning trial run including necessary fabrication jobs including allied civil work of one 1400mm width 2x300 KW 6.6 KV 1200 TPH Belt conveyer in main incline MIC under JPC.

Fabrication, galvanizing, testing, supply and delivery of different 33 KV and 132 KV Substation structure including G.I nuts, bolts and washers matching with the above structures at different Substations of WBSETCL

Annual rate contract of different structural repair, new structure fabrication, re-fitting and re-installation of electrical equipments and systems etc. misc. jobs under CHP-EM at CHP Area Santaldih T.P.S.

Extension and Barricading of tail end areas walkways of BCN-12A,B for safe movement, Fabrication, Erection 05 no stone-picking stands at BCN-22A,B and BCN-7 at CHP

Service contract for Chequered plate fitting at area of MS and CRH lines of Unit 6 by fabrication and Erection work at PRDS floor for safety purpose under TMD dept., STPS

Work for replacement of damage riser pipes of cooling towers of Unit 6 by fabrication and erection with 406.4 mm outer diameter (O.D.) ERW mild steel pipe at DVC, MTPS, Mejia

Custom Bid for Services - Growth of Work for Fabrication Supply Installation Insulation of HVAC Ducting Trunking Chilled Water Piping along with associated fittings in GRSE for P17A Yard 3022 and 3023

Supply, Installation, Fabrication and Erection of Safety Guard Assembly for Angle Cock (BP & FP ) for WAP7 locos as per per Drg. No.: - 1209-00.340-215. Drawing attached. Make: - MU or Similar.

Making fabrication transportation and installation of discharge tail end frame foot overbridge of conveyor belt in RV and RVII seam and miscellaneous job at Nakrakonda Kumardihi B colliery under Bankola Area.

Design, engineering, supply, fabrication, erection and construction of PEB (PRE-ENGINEERED BUILDING) shed with intermediate floors, land development, electrification, tank foundations, driveways, TLF etc at IOCL LBP Budge Budge, West Bengal.

BOGIE BOLSTER (MACHINED) FOR FIAT BOGIE WITH AIR SPRING TO DRG. NO. 66704001/COL.I alt 'b Special Condition : -SPECN. MDTS-204001 REV.01 [LATEST REVISION] SHALL BE GENERALLY FOLLOWED FOR FABRICATION

Supply and Fabrication of Structure bond ( 40x6 mm MS flat) as per RDSO Drg. ETI/OHE/P/7000 along with galvanised Nut Bolt with washers lock size 16x50x38 with black paint.

BOGIE BOLSTER (MACHINED) FOR FIAT BOGIE WITH AIR SPRING TO DRG. NO.66704001/COL.I alt 'c' Special Condition :-SPECN. MDTS-204001 REV.01 [LATEST REVISION] SHALL BE GENERALLY FOLLOWED FOR FABRICATION

BOGIE BOLSTER (MACHINED) FOR FIAT BOGIE WITH AIR SPRING TO DRG. NO. 66704001/COL.I alt 'c' Special Condition : -SPECN. MDTS-204001 REV.01 [LATEST REVISION] SHALL BE GENERALLY FOLLOWED FOR FABRICATION

Complete Fabrication and supply of Transformer Lifting Trolley (Non-Hydraulic), load bearing capacity of wheel-15ton heavy duty, wheel should be move - 360 degree Celsius. As per drawing no. CLW/ELS

Custom Bid for Services - 200153416 Biennial service contract for LT motor rewinding and misc fabrication jobs at electrical workshop at NTPC Farakka Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Engagement of Experts for supervision (Ex BHEL) & welding Expert (WRI-Ex BHEL) for supervision work during overhauling of Boiler of Unit#1, 5 & 3 or any Three units at MTPS-Ph-I, DVC Similar Category Operation and Maintenance Power House/Power Plant

WBSO ENGG Design, Engineering, Supply, Manufacture, Fabrication, Installation, Testing and Commissioning of Vapour Recovery System Including Comprehensive AMC for 7 years at IOCL, Haldia Terminal, Radhamadhavchak, Haldia, Dist Purba Medinipur, W. B.

Repair of damaged gates shutter, walkway of HR gate including painting of all MS structure and replacement of damaged rubber seal of Kandisala Barrage at Bisalpur, within Block - Dubrajpur in the Dist Birbhum.

Illambazar-Dubrajpur Road(SH-14) Insertion of wooden blocks in between the suspended span and the Steel structure and other miscellaneous works under ILLambazar Highway Sub-Division

MAKING CUSTOMIZED STEEL STRUCTURE FOR KEEPING DOCUMENTS INCLUDING SHIFTING OF DOCUMENTS FROM EXISTING RECORD ROOM (2ND FLOOR) TO NEWLY CONSTRUCTED RECORD ROOM (GROUND FLOOR) OF CMO BUILDING.

MAKING CUSTOMIZED STEEL STRUCTURE OF NEW RECORD ROOM OF HEALTH DEPARTMENT FOR KEEPING BIRTH AND DEATH REGISTERS FROM DIFFERENT CREMATORIUM INSIDE ROOM NO 24 OF CMO BUILDINGS

Mobile Field Urinal Pot with Ply stand and complete set, Mobile Filed Commode with ply stand and complete set, Mobile Field Wash Basin with Ply and complete set, Pipe Joint and Accessories, Sunmica Sheet

Transportation and laying of 820m 6 in pipeline including welding of flange in 23L/23E dip in 23B/10L dip for dewatering of 23E and 23F dip section in R-VI seam at MIC, JPC.

Supply and fitting of 10 inch dia M.S.Flange welding with 10 inch dia X 6 mtrs.length M.S. pipe and earth digging for extension of pipe line at borira quarry of DOCP dewatering of mines water.

Repairing of street light pole through electric welding, muffing, painting and faulty cable change at Teachers colony, Baishali Co-operative, Stabdi Co-operative, Camelia Housing, Malancha, Astarag, Jail Khana Road and improvement of illumination wit

AT welding set with all equipment in complete (Compressor blower = 01 no, weld trimmer power pack = 01 no, abrasive cutting machine = 01 no, rail profile weld grinder with frame = 01 no, Honda generator = 01 no)

Aluminium Electrodes 3.15 mm Dia., Tensile Strength 24 Kg/Sq.mm (34000 PSI); IRS: Class-L (for welding of MMAW, Aluminium and Aluminium Alloys). Matl.& Specn : IRS M:28-2020, IS/AWS Spec. A5.3, IS/AWS

WELDING CABLE WITH GENERAL PURPOSE HOFR COMPOUND COVERED WITH COPPER CONDUCTOR WITH NOMINAL AREA OF CONDUCTOR. 360 A. AT 60% DUTY CYCLE & 30 DEG. C. AMBIENT TEMP. SIZE: 50 SQ.MM. as per Specn. IS : 98

ISI MARKED RUBBER HOSE FOR OXY-ACETYLENE WELDING AND CUTTING WITH BRAIDED TEXTILE RE- INFORCEMENT IN RED COLOUR CONFORMING TO IS:447/1988 (REAFFIRMED-1998) OF SIZE:8MM BORE X 15 MTRS. LENGTH "This is

Set of 1) CO2 flow meter with double stage two gauge regulator with Non-bursting S.S. diaphragm, Max.pressure 200 bar, Flow Max.35L/min. for MIG/MAG welding. 2) CO2 heater core 220V. Make; Misatu,

Manual Metal Arc Welding Electrode, Class - A2(Rutile type), Type of Coating - Medium, Size - 4.00 x 450 mm, to Drawing / Specification IRS: M-28/2020, Code ER4211X as per IS:814/2004. Make/Brand: Fer

ISI marked and CE Certified pressure Regulator 2 stage type Oxygen used in welding and cutting process to IS:6901/2018 and ISO: 2503/2009 with latest amendments if any. Terms and conditions with speci

CO2 FLOW METER WITH ISI MARKED MULTISTAGE TWO GUAGE REGULATOR WITH NON-BURSTING, RUSTING PROOF, SS DIAPHRAGM, MAX PRESSURE 200 BAR, FLOW MAX. 35L/MIN FOR MIG/MAG WELDING WITH INBUILT CO2 HEATER CORE 2

SOLID MIG/MAG WELDING FILLER WIRE, CLASS VI SIZE 1.2 MM (SPEC.NO.IRS M-46/2020) GRADE ER 308 L AS PER AWS: A 5.9/5.9M: 2017 IN SPOOL OF 12.5 KGS/ROLL. MAKE:SUPERLINK-MIG 308L

MANNUAL METAL ARC WELDING ELECTRODE, CLASS M-2, TYPE OF COATING : HEAVY, SIZE 4 MM X 350 MM . SPECIFICATION. No. :- IRS :M: 28- 2020, Version 1.0, CODE-E 19.9LR26 AS PER IS : 5206- 1983 ( Reaffirmed

MMA WELDING ELECTRODE. specn: RDSO SPEC.NO.: IRS M-28/12 CLASS M-2 SIZE 4 MMX350 MM. (DIAMETERXLENGTH) AS PER IS/AWS CODE E 19.9 LR 26 AND IS/AWS SPECIFICATION 5206-2003 (HEAVY COATED).

M.S. Welding Electrodes, Class A1 (Rutile Type), Size : 4 x 450mm Type of coating : Medium to Spec No. IRS:M 28-2020 and Spec. No. IS:814-2004 (Reaffirmed-2021), AWS Code ER4112. Make : SUPERLINK-6013

MANUAL METAL ARC WELDING ELECTRODE, CLASS D, TYPE OF COATING: HEAVY( SPECN. NO. IRS-M-28/2020 AND STR MC/STR/W/01/REV-2, SIZE:- 4MM X 450MM OR LATEST Make/Brand: SUPERLINK-88W

SCREEN GLASS FOR WELDING HAND SHIELD, SHADE: DIN 12 OF SIZE 108mm X 83 mm, THICKNESS: 2.7 mm - 5 mm. MAKE: SCS/AULEKTRO/ATHERMAL OR EQUIVALENT. TEST CERTIFICATE ISSUED BY OEM SHOULD BE SUPPLIED ALONG

ALLUMINIUM CONDUCTOR WELDING CABLE (HOFR COVERING) CABLE SIZE IN SQ. MM. 95,RATED CURRENT IN AMPS. AT 60% DUTY CYCLE:438A MIN WEIGHT OF 1 MTRS. LENGTHS OF CABLE CONDUCTOR SHOULD BE 253.90 GMS. SPECIFI

WELDING CABLE WITH GENERAL PURPOSE HOFR COMPOUND COVERED WITH COPPER CONDUCTOR WITH NOMINAL AREA OF CONDUCTOR 285 A AT 60 % DUTY CYCLE AND 30 DEG. CENTIGRADE AMBIENT TEMP. SIZE: 35 SQ.MM. AS PER IS:98

Manual Metal Arc Welding Electrode, Class M2, Type of Coating: Heavy Spec: IRS:M-28/2020, STR: MC/STR/W/01/Rev-2, (Size: 4 X 350 MM). Accepted MAKE-GEE LIMITED AND BRAND-GRITINOX 308L

Rod welding Silver Brazing Alloy - 2.5 mm. Material and Specification : IS: 2927 -1975, (Rev. 1), Amend. 1 of Jan. 1981,Gr.- BA Cu P5. Silver Brazing Alloys Size: 2.5 mm dia, confirming IS:2927/1975,