Fabrication Tenders in West Bengal

BIENNIAL RATE CONTRACT FOR FABRICATION OF HULL BLOCKS FOR VARIOUS PROJECTS AT VENDOR PREMISES AND DELIVERY TO GRSE

Design, Fabrication, mounting and installation of Lit-up Signage with LED module at Biswa Bangla Mela Prangan, Kolkata

FABRICATION AND INSTALLATION OF DELIVERY LINE TO COMMON HEADER FROM NEW PUMP UNIT NO. 4 AT MUKUNDAPUR BPS

Fabrication and installation of shelf (Rack) for setting up Sristisree outlet within Raiganj Block premises, Raiganj, Uttar Dinajpur.

Welding apron (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Experience Criteria, Past Performance, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2026/B/7158563 Dated : 28-01-2026 Bid Document 1/6 Number of Auto Extension count 1 Past Performance 40 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 197500 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Refer technical specifications and BoQ

Trammel, Pocker, Prick punch, Aviation snips Straight cut, Flat headed hammers with handle., Planishing hammer, Snip bent Left Cut, Stake hatchet with Leg, Stake grooving, Gauge snap Go and Not Go, Gauge plug, Screw thread micrometer with ... Arc welding table, ... gas welding set ... Gas welding table ... valve, Welding torches, ... torches, Welding helmet ...

Portable Welding Machine (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6352237 Dated : 25-06-2025 Bid Document 1/5 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

STAPLER MACHINE HEAVY DUTY, ELECT COPPER WIRE 2 CORE 2 AND HALF SQM FOR WELDING, FUEL CLEANING DEVICE, HDMI CABLE FOR PROJECTOR, GUN FOR SILICON PASTE, WELDING HOLDER, DRILL BIT 8 MM, DRILL BIT 10 MM, DRILL BIT 12 MM, DRILL BIT 6 MM, WHELL CUTTER BOQ Title DGEME04

Transmission Pipe, Hydrulic Pipe, Ignation Switch, Nut Bolt Long, Nut Bolt Small, Field Coil, Leather cloth black, Foam rubber, Welding Road

Dendrite, Rod Welding Hard Facing 3.15mm, Flexible Pipe, Banjo Washer 14mm, Banjo Washer 12mm, Banjo Washer 6mm, Banjo Washer 8mm, Araldite

Toplink assy, Coolent hose, Steel angles 90X90X10mm, M S Sheet 16X8X16, Electric welding rod 3.15mm, Cutting blade 4, Steel angles 40X40X6mm

ELECTRODES WELDING STEEL ARMOUR, BANJO BOLT 10MM, OIL FILTER 15KVA, FUEL FILTER 19KVA, BEARING, FUEL PIPE ALUMINIUM D 120, AIR FILTER

Steel Angle Equal Mild, Angle Mild Steel 25x25x3mm, Steel Bar, Welding Rod, Plywood Gen Purpose 18mm, Plywood Gen Purpose 12mm 8x4

ELECT WELDING ROD, HOSE PICES, BRAKE HOSE, HOSE RUBBER, PUMP HAND, PIPE FUEL, FUEL PIPE, FLEXIBLE PIPE, THINNER, ENG MTG PAD

M S Sheet 16X8X16, Electric welding rod 3.15mm, Cutting blade 4 inch, Anabond, Rust cleaner, Granding wheel 4 inch, LT wire

LEVER, THUMB/H. AUTO LEVER WELDING TO DRG NO 5045017 WITH ACCESSORIES TO DRG NO 5045017/LEAF 01 IN F/(Q3)

WHITE METAL, COUPLING, PACKING, JOINT, BOLT, LOCK WASHER, FLAT WASHER, ROLLER BEARING, OIL RING BEARING BLOCK, SEGMENT, BALL BEARING, WIRE WELDING

Paint black, Paint Dark Grey, Paint White, Paint Yellow Gold, Paint Aluminium, Sheet Cellular 25 MM, Welding Steel Rod, Varnish Insulating

Paint RFU Finish OG, Paint RFU Red Sig, Plywood For Gen 180mm, Throttle Body Spray, MS Sheet, MS Angel, Welding Rod

Steel Angle Equal Mild, Angle Mild Steel 25x25x3mm, Steel Bar, Welding Rod, Plywood Gen Pur 18mm, Plywood Gen Pur 12mm 8x4

Angle Iron 20x20x3m, Angle Iron 205x25x3m, Steel angle 50x50x50, Electric Welding, Paint Fin Ammu air dry, Paint Navy blue, Paint White

PLYWOOD GD I9, SHEET CELLULAR, ROD WELDING HARD FACING 3.15MM, THROTTLE CLEANER, ARALDITE, THREAD ROLL, WIRING CLIP, ANABOND, PAINT RED OXIDE

Fabrication of two number of fire hydrants on street bo 374 353 near Plot noIIA /25 and IIA /25/1 for fire fighting arrangements to improvise structure in connection with return back of Haj Pilgrims along with fabrication of two M.S. spout of 80

Fabrication of two number of fire hydrants on street bo 374 353 near Plot noIIA /25 and IIA /25/1 for fire fighting arrangements to improvise structure in connection with return back of Haj Pilgrims along with fabrication of two M.S. spout of 80

FABRICATION AND ERECTION OF M.S STRUCTURAL SHED OVER TWO NOS OIL TYPE 1000KVA TRANSFORMERS OF WTP-IV AT GRWW.

Fabrication and laying of piping network from sludge-well to inlet chamber of raw water at WTP-III, GRWW

Fabrication and Installation of new barge including internal wiring at Hazrapur-I Major RLI scheme under Ranaghat-II Block

Designing, fabrication and presentation of a tableau in Independence Day Parade-2022 in Kolkata on the theme Matir Sristhi

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-33

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-34

Fabrication and renovation of walkway around central bearing of clariflocculator no-4 with allied works at WTP-I GRWW

Fabrication and Installation of new barge including internal wiring at Radhakantapur-I Major RLI scheme under Ranaghat-I Block

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-30

Designing, fabrication and presentation of tableau in the Independence Day Parade 2021 in Kolkata. The theme is National Integration.

Fabrication of wall cabinets, secretariate table, false ceiling etc. for reconstruction of Office Building of Alipore Division, PHE Dte.

Fabrication and Installation of new barge including internal wiring at Radhakantapur-II Major RLI scheme under Ranaghat-I Block

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-13

FABRICATION AND ERECTION OF TWO NOS. MS STRUCTURAL FRAME WITH COVER PLATE NEAR GARDEN REACH STP WITH ANCILLARY WORKS.

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-32

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-31

25120c 9 BLADE DAMPER FOR FAN DIA 2720, 25120c FABRICATION OF 9 BLADE DAMPER BLADE FOR FAN DIA 2720

STAGE FABRICATION, REGISTRATION DESK, SOUND AND LIGHT, PROJECTION, PERSONNEL, CULTURAL PROGRAMME, EMCEE, GENSET, SPECIAL EFFECTS, PHOTOGRAPHY, DECOR, LICENSES, TRANSPORTATION

ALUMINIUM SHEET HARD 1.22 MM, ELECTRODES WELDING STEEL MILD GENERAL, ELECTRODES WELDING STEEL MILD GENERAL P, (Deleted) M seal, cutting wheel 14", Cutting wheel 4", FEVICOL SR 998, PLYWOOD FOR GENERAL PURPOSES MR-BB 3 PLY, Sealing compound/anabond 673, INSULATING PVC TAPE WIDTH 20MM, Insulation tape electrical PVC adhesive

SR 998 FEVICAL, PAINT RFU ALUMINIUM, EMERY PAPER, PAINT SMOKE GREY, ROD WELDING COPPER3.15, FOAM SHEET CELLUCULAR 25MM, FOAM SHEET CELLUCULAR 37MM

ALUMINIUM SHEET HARD 1.22MM, ELECTRODES WELDING STEEL MILD GENERAL, STEEL SHEET CARBON HOT ROLLED, CUTTING WHEEL 14 INCH, CUTTING WHEEL 4 INCH

PULLY, SELF STARTER, AIR FILTER, PLY WOOD 18MM, PLY WOOD 6MM, WELDING ROD, CUTTER BLADE 14 INCH, CUTTER BLADE 4 INCH, RIVET

Construction of 25 mtr. Long Cable Trench for Welding Trades at ITI Durgapur in the district of Paschim Bardhaman. Project ID ET252640939S000

Welding apron (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6505272 Dated : 30-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Supply, Fabrication and installation of Roof Sheeting for 3 Nos. DG at Biswa Bangla Exhibition Centre in New Town, Kolkata.