Fabrication Tenders in West Bengal

FABRICATION AND INSTALLATION OF NEW M.S STRAINER AT THE BACK SIDE OF SLUDGE POND PUMPING STATION AT SLUDGE POND, GRWW.

Manufacturing by fabrication and fitting, fixing of various sizes Pulley with MS pipe for power bucket machines under SCD (N).

FABRICATION OF MSRL ALUM CAKE TRAY FOR ALUM SOLUTION VAT AT PROCESS CONTROL HOUSE-2 OF JAI HIND JAL PRAKALPA

BIENNIAL RATE CONTRACT FOR FABRICATION AND ERECTION OF BHD PIECES WITH BUILT-IN PIPE SPOOL OF MPVs and OTHER PROJECTS

Supply, fabrication and installation of new crossover and construction of walkways for new and old shed at Budge Budge BP.

Supply, fabrication and Installation of COASTAL Canopy (14 mx11m) at COCO Bakkhali under South 24 Parganas RSA under Kolkata DO.

Providing, fabrication and installation of Pylonl signage and Round Signage for UTSARI BANQUET Hall at ECO ISLAND NEW TOWN KOLKATA

Supply, Fabrication, Installation, Testing and Commissioning of video conference equipments and necessary Accessories including all complete, at Hooghly Zilla Parishad.

Installation and Fabrication of MS supporting structure on road side for the BPS inside Harish Park in ward No. 73.

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT THE ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-014

Selection of Event Management Agency for designing, fabrication and presentation of tableau in the Independence Day Parade 2023 in Kolkata

Fabrication and installation of Railing (Guard Rail) and allied works at different places of Bidhannagar Commissionerate under Bidhannagar Municipal Corporation.

Design with approval from competent authority, supply, fabrication and laying of Clear Water Rising main.....Kanchrapara Municipality under AMRUT 2.0.

Supply and Fabrication of Ice Can for Benfish Plant at Siliguri Ice Plant, at Siliguri Regulated Market, District of Darjeeling

Fabrication and laying of piping net work from sludge well to inlet chamber of raw water at WTP-I, GRWW.

Biennial Rate Contract for Fabrication and Erection of Aluminium Seats for ASW SWC Ships and other Shipbuilding Projects at GRSE

Superstructure and fabrication of Pandal pavilion stalls gates decoration of stage and display of theme (Exterior and Interior) and supervision

FABRICATION AND ERECTION OF UTTARAN SIGNAGE AT THE ENTRY POINT OF EACH OF THE BUSTEE LOCATION IN WARD NO-29

Fabrication, assembly in-situ G-3/L type glued insulated joints for broad gauge 60 Kg/52 Kg rail under Sr. DEN/III/APDJ vide Estt. Nos 12-Engg-AP-III of 2024-25, 13- Engg-AP-III of 2024-25, 14-Engg-AP-III of 2024-25 & 15-Engg-AP-III of 2024-25 & 30-Engg-AP-III of 2025-26.

Fabrication, assembly in-situ G-3/L type glued insulated joints for broad gauge 60 Kg/52 Kg rail under Sr. DEN/III/APDJ vide Estt. Nos 12-Engg-AP-III of 2024-25, 13- Engg-AP-III of 2024-25, 14-Engg-AP-III of 2024-25 & 15-Engg-AP-III of 2024-25 & 30-Engg-AP-III of 2025-26.

Fabrication, assembly in-situ G-3/L type glued insulated joints for broad gauge 60 Kg/52 Kg rail under Sr. DEN/III/APDJ vide Estt. Nos 12-Engg-AP-III of 2024-25, 13- Engg-AP-III of 2024-25, 14-Engg-AP-III of 2024-25 & 15-Engg-AP-III of 2024-25 & 30-Engg-AP-III of 2025-26.

Portable Welding Machine (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6632210 Dated : 01-09-2025 Bid Document 1/6 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 10 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Welding apron (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6888495 Dated : 13-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Welding Rod, Pop Rivit, Anabond, Banjo Washer 10mm, Banjo Washer 16mm, Cutter Blade 4inch, Cutter Blade 14inch, Grinding wheel 4inch, Cable tie 8inch

Renovation of Security and Compound light and renovation of EI work in the WELDING WORKSHOP and MACHINIST WORKSHOP at ITI Hooghly, Dist.- Hooghly.

Emergency repair of jetty No- 2,3,4 and 5, with welding during G.S. mela 2023 under Kakdwip Irrigation Sub division of Kakdwip Irrigation Division.

seal oil shaft rotary, joint for exhaust bend, pipe fuel, filter air, fly wheel ring, welding rod metal, steel angel iron, rubber matting

Cordless drill machine double battery, Air Blower GBL-620W, GOF 130 Professional Electric Router Machine 1300Watt, Bench Taping Machine P-310A, Welding Gloves

Design with approval from competent authority , supply, fabrication and laying of Clear water distribution pipeline.......h Municipal Corporation under State Fund

Fabrication and entry point Beautification at Joramandir under Bidhannagar Municipal Corporation. (excluding piling and allied shifting of utility services) (BEUP Fund).

Fabrication and installation of FRP make life size sculptures of JawaharLal Nehru Indira Gandhi Rishi Aurobindo for Alipore Museum inAlipore Kolkata

Supply and Fabrication of 100 Kg Capacity Ice Can for Benfish Plant at Kakdwip Fishing Harbours District of South 24 Parganas.

Fabrication and entry point Beautification at Baguiati under Bidhannagar Municipal Corporation. (excluding piling and allied shifting of utility services) (BEUP Fund).

Supply, fabrication and installation of wall Glowsign board of Shilpanno boundary with signage of Shilpanno in the roof in Alipore, Kolkata.

Laying with supply and fabrication of 350mm dia M.S. pipe line for recirculation pump and allied works at WTP-III, GRWW.

Fabrication - Erection Job of main delivery pipe (36 inches dia) Supporting Structure at SW-3 Pump House under Bidhannagar Municipal Corporation.

Design , Supply , fabrication and Laying with....Bata More with complete Defect Liability Period (DLP) for 60 months after completion of work .

Tender for Fabrication, Fitting Fixing and Assembling with allied customized items for Manufacturing of 5 Sets (10 Nos) of Bucket Machine.

Supply and Fabrication of 100 Kg Capacity Ice Can for Benfish Plant at Freserganj Fishing Harbours District of South 24 Parganas.

Creative design, fabrication and installation of informative board, display counter and identification signage in Police museum located in Alipore museum, Kolkata

Fabrication of proposed Independence Museum at Alipore Jail Hospital Building undertaken by HIDCO and implemented by Information and Cultural Affairs Department

Emergent fabrication of Iron structure for construction of Walkway at District and Sessons Court Premises Howrah during the year 2024 25

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; Fabrication of heavy duty metalic bench vice; Service Provider

designing, fabrication and presenting a tableau in the Republic Day Parade-2025 as well as in Bharat Parv in New Delhi

Manufacturing by fabrication of M.S. Bucket of different sizes (12 inch and 15 inch) for power bucket machines under M.S.C.D.(South).

BIENNIAL RATE CONTRACT FOR CHIPPING AND GRINDING WORK DURING FABRICATION AND ERECTION STAGES FOR VARIOUS YARD AT GRSE AND FOR SHOPS

FABRICATION AND ERECTION OF MS STRUCTURAL WORK WITH MS COVER PLATE OPPOSITE SEB COMPLEX ON TARATALA ROAD WITH OTHER ALLIED WORKS.

Fabrication and installation of playing equipments at BE Children Park as balance work within Ward No.31 under Bidhannagar Municipal Corporation.

Portable Welding Machine (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 5 Bid Number : GEM/2025/B/6855379 Dated : 04-11-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

ANABOND TUBE, PLYWOOD FOR GENERAL PURPOSES WWR AB 11P, ELECTRODES WELDING STEEL ARMOUR 3 15MM, STEEL BAR CARBON HOT, ADHESIVE PADDING GLUE MOWICOL L