Substation Tenders in Haryana

Augmentation of 132 kv Substation kosli from 1x16/ 20 MVA, 132/11 KV plus 1X 40/50MVA, 132/33KV plus 1X20/25 MVA, 132/33KV T/F to 2x16/20 MVA, 132/11 KV, 1X40/50 MVA, plus 1X20/25 MVA 132/33 KV along with extension of control room building in FY 2023

Augmentation of 132 kv substation Dadri-1 from 1x16/20 MVA, 132/11 kv plus 1x20/25 MVA, 132/33kv plus 1x8/4/4 MVA, 132/33/3.3kv T/Fs to 1x16/20 MVA, 132/11 kv plus 2x20/25 MVA,132/33 kv T/Fs at 132 kv S/stn Charkhi Dadri -1.

The work for creation of 01 no. 33kV bay at 132kV Substation MDU Rohtak (R-9) in back to back arrangement of 33kV S/Stn sector -1 bay in FY-2022-23 by HVPNL to cater the ultimate load of 13 MVA of 33kV S/Stn. Installed by HSVP for M/s Omaxe City Sect

Augmentation of 400/220kV Substation, Dhanonda from 3X315 MVA, 400/220 plus (1 x 160 MVA plus 1 x 100 MVA), 220/132 plus 1 x 100 MVA , 220/33 KV T/F to 3X315 MVA, 400/220 plus (1 x 160 MVA plus 1 x 100 MVA), 220/132 plus 2 x 100 MVA , 22

locations as mentioned in scope of work in Annex-01, 216 kV Surge Arrester for WR-I at various locations as mentioned in scope of work in Annex-01, 216 kV Surge Arrester for NR- II at various locations as mentioned in scope of work in Annex-01, 216 kV Surge Arrester for SR-II at various locations as mentioned in scope of work in Annex-01, 132 kV Surge Arrester for NR-I Gr-1 at various locations as mentioned in scope of work in Annex-01, 132 kV Surge Arrester for NR-I Gr-2 at various locations as mentioned in scope of work in Annex-01, 132 kV Surge Arrester for NR-III at various locations as mentioned in scope of work in Annex-01, 132 kV Surge Arrester for WR-I at various locations as mentioned in scope of work in Annex-01, 132 kV Surge Arrester for Kotra PS as mentioned in scope of work in Annex-01, 120 kV Surge Arrester for WR-I at various locations as mentioned in scope of work in Annex-01, 120 kV Surge Arrester for NR-III at various locations as mentioned in scope of work in Annex-01, 120 kV Surge Arrester for NR-I Gr-1 at various locations as mentioned in scope of work in Annex-01, 60 kV Surge Arrester for NR-I Gr-2 at various locations as mentioned in scope of work in Annex-01, 624 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, 390 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, 336 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, 336 kV Terminal connector for NER at various locations as mentioned in scope of work in Annex-01, 336 kV Terminal connector for SR-II at various locations as mentioned in scope of work in Annex-01, 336 kV Terminal connector for WR-II at various locations as mentioned in scope of work in Annex-01, 216 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, 216 kV Terminal connector for NER at various locations as mentioned in scope of work in Annex-01, 216 kV Terminal connector for SR-II at various locations as mentioned in scope of work in Annex-01, 216 kV Terminal connector for WR-II at various locations as mentioned in scope of work in Annex-01, 132 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, 120 kV Terminal connector for NR-III at various locations as mentioned in scope of work in Annex-01, Surge Monitor for SR-II at various locations as mentioned in scope of work in Annex-01

DTPC, E1 to FO convertor, Optical fibre, LIU, ITC of DTPC, ITC E1 to FO convertor, ITC LIU, ITC optical Fibre BOQ Title

HLM Insulated Scaffolding system, Conductive Suit, Conductive Socks, Conductive Boots, Conductive Gloves, Safety Belt with pole strap, Insulated rope, nylon slings, Tool buckets, MicroAmmeter, Ladder Top section, Ladder Bottom section, Splicer for Ladder, Swivel sticks, Spreader bar, Adjustable Strain poles, Splicer for Strain pole

145 kV 1250 A RIP or RIS Neutral Bushing Bottom connected with metal part and Gasket, 145 kV, 1250 A RIP or RIS Neutral Bushing Bottom connected with metal part and Gasket, 145kV, 1250A Neutral RIP or RIS Bushing bottom connection fixed centre Conductor type with metal part and Gasket, 145 kV, 1250 A RIP or RIS Neutral Bushing for Bus Reactor Draw Lead type with metal part and Gasket, 145 kV, 1250 A RIPor RIS Neutral Bushing for Line Reactor Draw Lead type with metal part and Gasket, 145 kV, 1250 A RIPor RIS bushing for NGR of Line Reactor Draw lead type with metal part and Gasket, 145 kV, 1250 A, RIPor RIS Bushing Draw Lead type with metal part and Gasket

Supply of Puncture Insulator Detector (PID) Kit

Supply of Leakage Current Partial Discharge Detector Kit for Northern Region -I

ACSR Bersimis Conductor Accessories Midspan Compression Joint, ACSR Bersimis Conductor Accessories Repair Sleeve, ACSR Bersimis Conductor Accessories Quad Spacer damper, ACSR Bersimis Conductor Accessories Quad Rigid Spacer for jumper, ACSR Bersimis Conductor Accessories 250 Twin spacer for QT fitting, ACSR Bersimis Conductor Accessories Quad Rigid Spacer, ACSR Moose-Quad Spacer damper alternative to Vibration Damper and Bundle Spacer, ACSR Moose-Quad Rigid Spacer for jumper, ACSR Moose-Rigid Spacer for jumper 250mm, ACSR Moose-Twin Bundle Spacer, ACSR Moose-Twin Bundle Spacer for ACSR Moose conductor

Composite Long Rod Insulators (POWERGRID) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Primary product category Composite Long Rod Insulators (POWERGRID) Bid Number : GEM/2025/B/6319112 Dated : 16-06-2025 Bid Document 1/12 Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 616000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 20 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Centralized Procurement Cell Power Grid Corporation Of India Limited, Centralized Procurement Cell, Regional Headquarter, Northern Region- III, Plot No 2A/INS02, Awadh Vihar Yojna, Amar Shaheed Path, Lucknow, Uttar Pradesh – 226002 (Power Grid Corporation Of India Limited) Splitting

PA Speaker (Q2), Microphone (Q2)

Electronic Lectern (Q2) MSE Exemption for Years of Experience and Turnover

Portable Hand Held Battery Operated SF6 Gas Detector

Junction Box for Lighting (Q3)

Primary Current Injection Kit (Q2) MSE Exemption for Years of Experience and Turnover

Reverse Osmosis based Point of Use Water Treatment System for Drinking Purposes (V2) as per IS 16240 (Q2) MSE Exemption for Years of Experience and Turnover

Automatic Fully Mechanised Organic Waste Machine for Compost (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6852466 Dated : 12-11-2025 Bid Document 1/9 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 137000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 66 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Chief Manager POWER GRID Corporation OF INDIA Limited, SCO BAY 5-10, SECTOR 16A FARIDABAD, HARYANA 121002 0129- 2666370 (Vishwajeet Singh) 2/9

Leasing of Electric Vehicles (Long Term) - Wet Lease; TATA NEXON EV - XZ+; Maximum km run per month-3000; 36 Months Lease; White

Monthly Basis Cab and Taxi Hiring Service - Without Fuel - SUV; Mahindra Bolero; 2025; 0-25, 000 kms; A/C; as per ATC

Pest and Animal Control Service - Maintenance Contract; 2 months; General Pests/Insects Control, Pest and Animal Control Service - Maintenance Contract; 2 months; Rodent Control, Pest and Animal Control Service - Maintenance Contract; 2 months; Termite Control (Spot Treatment/Drilling treatment), Pest and Animal Control Service - Maintenance Contract; 2 months; Vector Control (Mosquitoes/insects), Pest and Animal Control Service - Maintenance Contract; 2 months; Snake control

Leasing of Electric Vehicles (Long Term) - Wet Lease; Tata Nexon EV; 3000 km; 36 Months Lease; White

Manpower Outsourcing Services - Minimum wage - Semi- skilled; Secondary School; Non-IT Technical

Power Cables 1, Power Cables 2, Power Cables 3, Power Cables 4, Power Cables 5, Power Cables 6

Digital Earth Resistance Meter

Hexagonal Nut bolt, Antitheft bolt, Spring washer, Hexagonal Bolts and Nuts, Spring Washer, Pack Washers

Facility Management Service- Manpower based (Version 2) - Commercial; O&M of Electrical Work; Semi-skilled

Procurement of Data Collecting Devices (DCDs) for all regions of POWERGRID

400kV Current Transformer-NR-I Gp1, 220kV Current Transformer-NR-I Gp1, 400kV Current Transformer- NR-I Gp2, 220kV Current Transformer-NR-I Gp2, 400kV Current Transformer-NRIII, Terminal Connector NR-III, 220kV Current Transformer-NRIII, 400kV Current Transformer- ODISHA

SONIPAT, BALLABHGARH, JHATIKARA, CHITTORGARH, ROORKEE

Ferrule Printer (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6642474 Dated : 16-09-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Custom Bid for Services - NCAMC of VCB including all associated relays installed in HT panel as per A1 of BOQ, Custom Bid for Services - NCAMC of VCB of including all associated relays installed in HT panel as per A2 of BOQ, Custom Bid for Services - ... at sub -station ... sub- station as ... electrical substation as ...

Dslr/Compact/Handheld Camcorder Or Video Cameras (V2) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1 Bid Number : GEM/2025/B/6493062 Dated : 24-07-2025 Bid Document 1/8, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 59900 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Propeller Type AC Ventilating Fans - Exhaust Fans (V2) as per IS 2312 (Q2), Electric Ceiling Fan with BLDC Motor (V3) ISI Marked to IS 374 (Q2), Electric Pedestal Type Fan and Regulator as per IS 1169 (Q2) MSE Exemption for Years of Experience and Turnover

Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Outstation 24*7

Composite Long Rod Insulators (POWERGRID) (Q2) MSE Exemption for Years of Experience and Turnover

All in One PC (Q2)

Electrical Safety Devices and Accessories (Insulating Mats for Electrical Purposes) as per IS 15652 (Q3) MSE Exemption for Years of Experience and Turnover

HANDHELD BRUSH CUTTER/LINE TRIMMER (Q3), Lawn Mowers (Q3)

400 kV 8800 pF CVT 1Ph along with terminal connector, 400 kV 8800 pF CVT 1Ph with terminal connector, 400 kV 4400 pF CVT 1Ph along with terminal connector, 400 kV 4400 pF CVT 1Ph of 31mm per kV creepage with terminal connector, 400 kV 4400 pF CVT 1Ph with terminal connector, 220 kV 4400 pF CVT 1Ph along with terminal connector, 220 kV 4400 pF CVT 1Ph with terminal connector, 132 kV 8800 pf 1ph CVT along with terminal connector, 132 kV 8800 pf 1ph CVT with terminal connector

400kV, 3000A, 50kA, 1-Phase, 6 core CT, 120 perc extended current rating with terminal connector as per POWERGRID TS, 220kV, 1600A, 40kA, 1-Phase, 120 perc extended current rating with terminal connector as per POWERGRID TS, 220kV, 1600A, 40kA, 1-Phase, 150 perc extended current rating with terminal connector as per POWERGRID TS, 220kV, 1600A, 40kA, 1-Phase CT with 120 perc extended current rating with terminal connector as per POWERGRID TS, 220kV, 1600A, 40kA, 1-Phase CT with 150 perc extended current rating with terminal connector as per POWERGRID TS, 132kV, 1200A, 31.5kA, 1-Phase CT with 120 perc extended current rating with terminal connector as per POWERGRID TS

Portable Fire Extinguishers (V3) as per BS EN Standards (Q2) MSE Exemption for Years of Experience and Turnover

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

Manpower Outsourcing Services - Minimum wage - Skilled; 5th Class; Others, Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Outstation 24*7

Professional Painting Service - Metals; NA; Bay Earth switch marshalling Box

Canteen Service - Employee Welfare Model - Vegetarian, Non-Vegetarian; Breakfast, Lunch, Dinner, Snacks, Beverages; Inside Building Premises (exclusive for employees/patients/in house personnel)

Plastic Moulded Chair-IS 13713