Inspection, Testing & Audit Tenders in Rajasthan

Selection of Laboratories for Testing of Products/Material - Copper Concentrate; As per LTE; Tonn; Testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination

P.V. Expansion (Flat) moulding Size-25x3x2000 mm long to N.E.Rly. Drg. No. SK-1457/C, Alt.2, Fig. 1 item 1, colour - As per Drg. Note - Material testing should be as per RDSO Specn. No. RDSO/2015/CG-0

Calibration gas cylinder for Serveron (M/s Qualitrol) make TMB Online DGA monitor, Carrier gas cylinders for Serveron (M/s Qualitrol) make TMB online DGA monitor, Replacement of Gas cylinders and servicing of online DGA system to ensure successful sampling and da

Custom Bid for Services - Hiring of Qualified Coordinating Agency (QCA) Services for Unchawas Wind Power Plant at Unchawas, Madhya Pradesh Similar Category Energy Audit Service - Lumpsum Based

Civil Work

P.V. expansion (Flat) moulding size - 25 x 3 x 3600 mm long to N.E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 1 item 8, Note:- colour of moulding - As per drg. & Material testing should be done as per RDSO

P.V. Expansion (Flat) moulding Size-25x3x2000 mm long to N.E. Rly. Drg. No. SK-1457/C, Alt.2,Fig. 1 Item1, colour - As per drg. And material testing as per RDSO spec- RDSO/2015/CG-02(Rev-1) with amend

Supply and commissioning of Portable type Blackbody Temperature source for calibration of HOT AXLE BOX DETECTOR (HABD)System.(Annexure attached.) Offered & accepted make: Self

Annual testing and calibration of Numerical relays installed in the 06 nos TSS of RN region and Thivim TSS of Karwar region of KRCL.

as per NIT

Supply, installation and calibration of various Lab Instruments for measurement of various parameters of water and flue gases at Chemical laboratory CTPP-O and M, Chhabra.

Removal, shifting, maintenance, calibration and re-fixing of transmitters, current to pressure (I/P) convertors, RTD and maintenance of panels at HWPK during MTA-2025.

Supply, installation and calibration of various Lab Instruments for measurement of various parameters of Water and Oil at chemical laboratory, CTPP-O and M, Chhabra

Calibration Services - ONLINE CONTAMINATION CHECKING KIT SENSOR STI BOTTLE SAMPLER; ONLINE CONTAMINATION CHECKING KIT SENSOR STI BOTTLE SAMPLER; AS PER BUYER REQUIREMENT; AT VENDOR PREMISES

Procurement of Surface Roughness Comparator. Model: SA 2.5 (Shot) with NABL Calibration Certificate. Make: Precise, Rubert or equivalent brand. Offer accepted make: PRECISE, RUBERT ENGLAND.

Selection of Laboratories for Testing of Products/Material - Copper Concentrate; As per LTE; Tonn; testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination for sale of KCC Copper Concen..

P.V. expansion (Angle) moulding size - 32 x 32 x 2.5 x 1800 mm long to N.E.Rly. Drg. No. SK-1457/C Alt. 2, Fig. 2 item-6. colour as per drg. and material testing as per RDSO spec. no. RDSO/2015/CG-02

P.V. expansion (Angle) moulding size - 70 x 26 x 3 x 2000 mm long to N.E. Rly. Drg. No. SK - 1457/C Alt. 2, Fig. 2 item 2, colour As per Drg. Note: Material testing should be as per RDSO Specn. No. RD

P.V. expansion (Angle) moulding size 25 x 25 x 2 x 1850 mm long to N.E.Rly. Drg. No. SK 1457/C Alt. 2, Fig. 2 item-l, colour As per Drg. Material testing should be as per RDSO Specn. No. RDSO/2015/CG-

P.V. expansion (Angle) moulding size 25 x 25 x 2 x 1850 mm long to N.E.Rly. Drg. No. SK 1457/C Alt. 2, Fig. 2 item-l, colour As per Drg. Material testing should be as per RDSO Specn. No. RDSO/2015/CG-

Selection of Laboratories for Testing of Products/Material - Copper Concentrate As per LTE Tonn Testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination; As per LTE; Tonn; Testing and ca..

Selection of Laboratories for Testing of Products/Material - Copper Concentrate As per LTE Tonn Testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination; As per LTE; Tonn; Testing and ca..

Custom Bid for Services - Surface preparation of component for lab activities and handling of test samples testing material testing equipment upkeep of test equipment in CMT Laboratories of NWR zone As per Scope of Work Similar Category Cleaning, Sanitation and Disinfection Service - Outcome Based Manpower Outsourcing Services - Minimum wage

WHEEL GAUGE (B.G) AS PER RDSO DRAWING NO. SKDL-3592, ALT-6 , TO MEASURE WHEEL DIA, FLANGE WEAR, ROOT WEAR AND TREAD WEAR, WITH CALIBRATION CERTIFICATE.

DIGITAL WHEEL DIAMETER GAUGE { MEASURING RANGE-800 TO 1100MM. LCV- .01MM, MEASURING ACCURACY =%B1.02 WITH ONE YEAR CALIBRATION CERTIFICATE & TRANPORTATION BOX WITH CARRYING HANDLE.SUPPLIED WITH CAL

Supply and commissioning of Black Body temperature source /Calibrator with calibration certificate by government approved agencies as per Annexure Firm offer: same as above. Make: SELF

Dead Weight Pressure Gauge Tested along with standard accessories with one year NABL calibration certificate as per Annexure 'A' Make -DW-12-RAVIKA Instruments or Similar

Maintenance (For Three Year) Work of Central Laboratory and Quality Control Office at Sector-08, Pratap Nagar, Sanganer Jaipur

Custom Bid for Services - GROUP A GUJARAT REGION TOTAL PRICE INCLUDING GST FOR HIRING OF SERVICES FOR CALIBRATION OF PRESSURE SAFETY VALVES AND TEMPERATURE SAFETY VALVES AS PER BOQ, Custom Bid for Services - GROUP B RAJASTHAN REGION TOTAL PRICE ... FOR CALIBRATION OF ...

P. V. expansion moulding (Flat) size- 50 x 3 x 3600 mm long to N. E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 1 item 4, Colour.- As per Drg. Note:-Material testing should be as per RDSO Specn. No. RDSO/20

P. V. expansion moulding (Flat) size- 50 x 3 x 3600 mm long to N. E. Rly. Drg. No. SK- 1457/C Alt. 2, Fig. 1 item 4, Colour.- As per Drg. Note:-Material testing should be as per RDSO Specn. No. RDSO/2

Custom Bid for Services - NLCIL-BTPS- To carryout the Structure Stability test of School Building as per drawing enclosed Similar Category Test Service- 28-11-24 Selection of Laboratories for Testing of Products/Material Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - Custom Bidding of Service for OnSite Calibration and Intermediate check of Baur Make Tan Delta and Resistivity Test Kit at STL POWERGRID Bhiwadi

Trammel gauge for measuring wheel dia.( loose wheel set ) As per DRG. No. SKDL- 4477 along with calibration certificate Traceable to NABL standard, Make- Mitutoyo /or equivalent

Trammel gauge for measuring wheel dia.( loose wheel set ) As per DRG. No. SKDL- 4477 along with calibration certificate Traceable to NABL standard, Make- Mitutoyo /or equivalent

Digital dial indicator range with magnetic base holder range 0-10 mm resolution 0.001mm with calibration certificate traceable to national standard make-Mitutoyo/Tesa/Forbes or equivalent

Computerized and automatic microcontroller based test bench with printing facility for cab meters of conventional & 3 phase in electric locomotive with calibration certificate. As per specification a

Heavy Duty Torque Wrench Ratchet Type 10to 60 NM or equivalent Capacity, 1/2 inches Square Drive,Make Taparia/Venus/De neers or Neelyog, With Calibration & WarrantyCertificate

Trammel gauge for measuring wheel dia.( loose wheel set ) As per DRG. No. SKDL- 4477 along with calibration certificate Traceable to NABL standard, Make- Mitutoyo /or equivalent

Consultancy Services for repair and rehabilitation for Safety Audit Work of Major Bridge Rawatbhata Jawaharnagar Road in Km 1/0 to 2/0 under PWD Division Begun

Rate Contract for Supply, Installation, Testing, Calibration, Integration with Automation and Commissioning of 2 inch Flow meter with Loading Arm for Retail outlets under IOCL Rajasthan State office

Gauss meter, Digital Type of Range 30 Gauss, to measure Residual magnetism in Axles, With calibration certificate by NABL approved lab. MAKE OFFERED BY FIRM IS "MK-RFI"

Pressure gauge , range 0-14kg/cm2, dial size 4" (100mm), least count: 0.1 kg/cm2 with calibration certificate. Make: MICRO or Similar. ACCEPTED MAKE- MICRO/RAMCO/H. GURU

STEEL RATCHET TYPE TORQUE WRENCH WITH TEST AND CALIBRATION CERTIFICATE.RANGE:135 TO 675 NM / 14 TO 70 Kgf.m WITH 3/4 INCH SQUARE DRIVE.MAKE: STANLEY / ZYLOK /TAPARIA ONLY.

Digital Wheel Diameter gauge - Measuring range 800mm to 1010mm, measuring Accuracy +/- 0.2mm, Least count 0.01mm, supply along with calibration certificate ISSUED By govt./NABL approved Lab. Make - PI

Selection of Laboratories for Testing of Products/Material - COpper Concentrate; As per LTE; Tonn; testing and calibration of weighscale supervision of weighment sampling sample preparation and moisture determination

P. V. expansion (Cover) moulding size - 20 x 20 x 6 x 6 x 2 x 2000 mm long to N. E. Rly. Drg. No. SK-1457/C Alt. 2, Fig. 5 item 1, colour as per Drg. Material testing should be done as per RDSO Specn.

LTE for Appointment of Independent surveyor for testing and calibration of weighscale, supervision of weighment, sampling, sample preparation and moisture determination of Copper Concentrate of KCC Origin at KCC.

Comprehensive annual maintenance contract of electronic static rail Weigh Bridge at C&W workshop, Bikaner for a period of three years including calibration/stamping by Legal Metrology Department, Rajasthan.

Comprehensive annual maintenance contract of electronic static rail Weigh Bridge at Wagon Repair Shop, Kota for a period of three years including calibration/stamping by Legal Metrology Department, Rajasthan.