Valves Tenders in Tamil Nadu

SRPH530137-100% SILICONE CATHETER 14FR TWO WAY- CATHETER MADE OF SILKOMED (100% SILICONE),14FR, TRANSPARENT, TWO WAY, WITH FUNNEL, VALVE FOR LUER AND LUERLOCK SYRINGE TIPS, STERILE, APPROX 41 CM LONG,

Valve regulated Lead acid batteries 1100 Ah capacity consisting of 56 cells including trays for SG AC coaches conforming to RDSO Specification No. RDSO/PE/SPEC/AC/0009-2014 (Rev.2)

COPPER GASKET TO LP SUCTION VALVE, EMD PART NO:8083592, DLW Pt.No.17380157. Make/Brand: CEC ,Accepted firm s offer:EQUIVALENT TO ELGI PT NO. 07040918A/EMD PT NO. 8083592. MAKE CEC.

MOISTURE SEPARATOR FITTED WITH MANUAL DRAIN VALVE SIZE 1/2 INCH- DETAILED SPECIFICATION AS UNDER. FLOW RATE 180 CFM. MAXIMUM WORKING PRESSURE- 16 BAR. MAXIMUM WORKING TEMP.- 100 DEGREE CELCIUS, MINIMU

MAGNET VALVE ASSEMBLY FOR VCB TYPE 2OCB/22CB OF M/s. SCHNEIDER ELECTRIC INFRASTRUCTURE LTD. TO THEIR PT.NO.5260000. Firm's Offer: Make/ Brand - SCHNEIDER. HSN NO.85362090. Firm's Remarks: READY STOCK

Discharge valve service kit as per ELGI Pt. No: 072403739. Kit consists of 04 items as per annexure enclosed. Note: Firm should submit authorised dealership certificate along with tender otherwise off

Electro pneumatic proportionate valve (Digital Pressure Regulator), Max Supply pressure: 1.0MPa, Power Supply Voltage: 24V DC +/- 10%, Input Signal: Current Type 04 to 20mA DC, Port Size: 1/2 inch, Ma

Danfoss make thermostatic expansion valve 4.5 TR suitable for use with R-22/R_407C refrigerant with Danfoss catalogue No.068U2075 suitable for roof mounted packaged AC unit for electrical locomotive a

Levelling Valve for Air suspension Systems to Drawing/Specification as per RDSO Specification No. C-K407,(Rev-3), Amendment No-1 and Sketch No-K-1049,Alt No-1. Make - RTC.

Supply and installation of following set of converter modules, Suitable to semi Automatic Distribution valve Test Bench. (i).Analog input module, Model: FIOA 0800 L-B or equivalent, Power supply:24

GASKET-CYLINDER HEAD TO VALVE COVER TO DLW DRG. NO. SKE-1350 , PART.NO.10175910. NOTE: MANUFACTURER SHOULD INDICATE THEIR IDENTIFICATION MARK, MONTH AND YEAR OF MANUFACTURE AT A SUITABLE LOCATION BY

SRPH293410-TRANS JUGULAR LIVER ACCESS AND BIOPSY STERILE PACK SHOULD INCLUDE BIOPSY NEEDLE AND A PRE ASSEMBLED LIVER ACCESS SET CONSISTING OF A RADIOPAQUE SHEATH, VALVE ADAPTER, AND A STIFFENING CANNU

VALVE ASSLY Drain 1/4 BSP for RR 20070 . ELGI Air compressor for MEMU Part NO.A020045 Firm's Offer:Valve Assembly Drain 1/4-inch BSP equivalent to Elgi Part No.A020045. Make: CEC

MOISTURE SEPARATOR FITTED WITH MANUAL DRAIN VALVE SIZE 1/2 INCH- DETAILED SPECIFICATION AS UNDER. FLOW RATE 180 CFM. MAXIMUM WORKING PRESSURE- 16 BAR. MAXIMUM WORKING TEMP.- 100 DEGREE CELCIUS ,MINIMU

STUD (FOR DISTRIBUTOR VALVE) M12X60 Conforming IS Material Specification IS:1367 PT-III/ 79, PROPERTY CLASS-4.6 and to SCR Drawing No. S.C.R.C&W SKETCH NO. 1110, Item-2, Alt.-Nil.

Inlet valve service kit as per ELGI Pt.No: 072403729. Kit consists of 06 items as per annexure enclosed. Note: Firm should submit authorised dealership certificate along with tender otherwise offer wi

Disc valve service kit as per ELGI Pt.No: 022400989. Kit consists of 08 items as per annexure enclosed. Note: Firm should submit authorised dealership certificate along with tender otherwise offer wil

12 VOLT 75AH VALVE REGULATED LEAD ACID SMF BATTERY MAINTENANCE FREE TYPE AND IN CHARGED CONDITION WITH FASTENERS AND CONNECTORS IS REQUIRED. MAKE : EXIDE, POWERSAFE, AMARON OR QUANTA. (MINIMUM 2 YEAR

Magnet Valve SR 3403 SB for Tri-plate panel mounted IRAB-9/IRAB-10 brake system to SIL's Drg. No. 29297102 or similar for Electric Locos. Make/Brand - ROTEX or similar.

Custom Bid for Services - Providing Assistance and Support services during OM activities in Compressor station Intermediate Pigging stations Sectionalizing valve stations Receiving stations CSIPSV RT under SRPL Ramanathapuram for 2 Years

Rate Contract of Testing and Calibration of Safety Relief Valves, Filter Relief Valves, and Pressure Gauges as per Static and Moving Pressure Vessels (SMPV) (U) Rules 2016

TTPS Operation Circle CAD ACWPH Unit II A.C.W System Annual Overhauling of valves, strainers and NRVs of A.C.W pumps and inlet and outlet valves of cooling tower

Custom Bid for Services - Revival of CI system of Deluge valve spray system in Unit 1 2 and 3 Offsite areas Internal and External CHP Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

item no -1 as per Table-A of ATC, item no -2 as per Table-A of ATC, item no -3 as per Table-A of ATC, item no -4 as per Table-A of ATC, item no -5 as per Table-A of ATC, item no - 6 as per Table-A of ATC, item no -7 as per Table-A of ATC, item no -8 as per Table-A of ATC, item no -9 as per Table-A of ATC, item no -10 as per Table-A of ATC

NCTPS I SE MI circle AOH 24 25 TM Dn Unit I III Removal cleaning and re insulation of ceramic blankets over the MS HRH strainers HP Bypass valves CRH extraction NRVs MAW MAL valves deaerator pegging valves and connected pipe lines and aluminium

NCTPS I SE MI circle AOH 25 26 TM Dn Unit I II III Overhauling of motor driven angle drain valves MAL and seal leak steam line MAW valves with actuator hand operated isolation valves in seal and leak steam line during annual overhaul works

NCTPS I SE MI Circle AOH 26 27 BM Dn Unit I Overhauling of HP LP valves in PRDS WWSB safety valves and renewal rectification of HP LP valves steam lines drain lines in PRDS station and its connecting drain lines to IBD tank

Operation of pump and valves for supply of construction water to ESEZ STPP site from E SEZ STPP pump room located in the NCTPS II premises for the period of six month from the date of commencement including attending leakages damages in the pipe line

Suction valve 1st 2nd 3rd stage, Discharge valve assembly 1st 2nd 3rd, Suction valve 4th stage, Delivery valve 4th stage, Protection grill 1st 2nd 3rd stage, Bell valve suction 1st and 2nd stage, Bell valve suction 3rd stage, Bell valve suction and ... Bell valve Delivery ... Bell valve Delivery ...

Machined Valve body castings

ENVFH5084 - Final Machining of Bodies(F91 and F92) for FH Valves

Inspection and cleaning of boiler drum and overhauling of safety valves

E Procurement of Various Sizes of MS ERW Bends Gate Valves

ENVFH5217 - Rough Machining of Disc S/F - SFJQ for FH Valves

Supply, Installation, Testing and Commissioning (SITC) of 120 Nos. Sealed Maintenance Free (SMF), Valve regulated Lead Acid batteries (12 V, 100 AH) having Fire retardant casing at Bank’s Main Office Premises, Chennai

TTPS Operation Circle CAD CWPH II Dismantling, Fabrication and Erection of new M.S structure of cooling water pumps discharge air release valve walkway platform at CWPH II in Unit IV and V

Construction Valve chamber worker kulamangalam main road and construction of toilet building and ration shop in manvalan nagar 2nd st and construction of strom water drain in tagore nagar in ward 23

TTPS Mech II AHP Renewal of wornout North East West side vertical box column BAH structural supports walkway platform with staircase around BAH seal trough and makeup valve in Unit III BAH

TTPS Mech II BM Unit I Boiler Painting of the safety valve exhaust pipes its silencers CST tank and Hotwell makeup pump water lines OHS platform structures during the overhaul 2019 2020

Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (Q3) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

SAFETY GUARD FOR AIR SPRING LEVELLING VALVE TO DRG.No.ICF/SK-9-0-132, ALT-e/0, ITEM-1.. Please Visit ICF Vendor Portal For Downloading Drawing https:// vp.icf.gov.in/ vendTendorDetNew.php Using Key 07

5/2 Way single solenoid valve BSP 1/4 inch (with mounting 24VDC coil) designed for Pressurized Flushing System as per MMDTS 19027. Rev.03. Functionally compatible in Pressurized Flushing System fitted

Supply of Digital timer auto drain valve and strainer with specifications and make as per annexure enclosed. Note : Item to be supplied along with Warranty certificate for minimum one year FIRM'S OFFE

SAFETY GUARD FOR AIR SPRING LEVELLING VALVE TO DRG.No.ICF/SK-9-0-132, ALT-e/0, ITEM-1. Please Visit ICF Vendor Portal For Downloading Drawing https://vp.icf.gov.in/vendTendorDetNew.php Using Key: 0723

lnlet valve service kit as per ELGI Pt. No: 072403729. Kit consists ot-06 items as per annexure enclosed. Note: Firm should submit authorized dealership certificate along with tender otherwise offer w

AS661 OH kit for auto drain valve GM type. Kit consists of 11 items as per annexure enclosed. Make: Trident only. Note: Firm should submit authorized dealership certificate along with tender otherwise

MAGNET VALVE ASSEMBLY FOR VCB TYPE 22CB TO M/s. SCHNEIDER PART NO.VDRM00150-01 AS PER M/s. ROTEX AUTOMATION LTD MODEL NO. 3486-5-SB-S2 110V DC. MAKE/BRAND: SCHNEIDER

One set consisting two items for Shot blasting Machine & quantity mentioned against each. (i) Foam (Rubber beeding) 40 mm x 10 mm x 10 mtr - 2 Numbers (ii) Pulse Jet Diaphragm valve

EXIDE Small Sized Valve Regulated Lead Acid Batteries of 12V/1.9Ah/12P19 with 1 Year Brand: EXIDE (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687716364590 dt.02/

AS661 OH kit for auto drain valve GM type. Kit consists of 11 items as per annexure enclosed. Make: Trident only. Note: Firm should submit authorized dealership certificate along with tender otherwise