Loading…
Loading…
946 results • Best match
REPAIR/REPLACEMENT/MAINT AND SERVICING OF AC PLANTS AND ALLIED EQUIPMENT ANORTH AND SOUTH SIDE OF RUNWAY UNDER GE AF NO 2 AT AFS JODHPUR.
Material and Labour for servicing and testing complete up to 10 TR to 80 TR compressor package type unit with replacement of worn out /unserviceable parts and re fixing the same after complete servicing with accessories such as nut, bolts, washers etc. including testing, commissioning complete to the entire Satisfaction of complete all as directed and directed by Engineer-in-Charge. Note :- (i) Condensor/Chiller coil cleaning by Basic chemical of approved make with preventing equipment from cleanser and avoiding any hazard to human being from chemical reaction. Testing shall be done for leak test, vaccum test, insulation, HV, wiring and performance test with complete test report with actual reading and read standerd parameter reading duly signed by HVAC maint Engineer/Tech of reputed firm. '.
Construction of 50 Bedded Critical Care Block at GMC Trivandrum, Kerala
HVAC - VRF SYSTEM
CONSTRUCTION OF WAREHOUSE AND OTM ACCOMMODATION FOR CGASD AT TARATUA, KHORDHA, BHUBANESWAR
Supply installation & testing and commissioning of GSM communicator which converts the Contact ID codes of the fire alarm panel's PSTN communicator For central alarm monitoring: GSM Communicator is special for converting the PSTN Adecco Contact ID codes to readable SMS notifications and SIA-09 IP over GPRS network to central monitoring station (CMS). Available in 2G/3G/4G/LTE mobile network versions. Fire detection and alarm system are to be connected with GSM Module with 2/4G GSM version of. 2G QUAD BAND (850/900/1800/1900 MHz). Direct mount Antenna with SMA Male L-Type Connector – CDMA and WCDMA, 2.5 dBi Gain and 850-2100/2400 MHz. IP communicator for fire alarm control panels, Supports full transmission Contact ID over IP SIA-DC09 event information to security monitoring station. 4/8 general alarm inputs including power supply voltage monitoring via SMS messages,800 remote control users via free short call,800 users control by GSM call or using maxim- Dallas I Button keys, Configuration using standard mini-USB cable. Remote configuration and firmware upgrade, Easy installation. Testing and diagnostic of the module via USB by using program SOFTWARE. Very useful features are troubleshooting and testing of the module via USB PC; this saves time for installer and allows real-time monitoring of module parameters, input/output and GSM modem status (IMEI, SIM, registration) etc. Supports up to 32 temperature sensors or 1 humidity/temperature sensor for automation purposes such as HVAC temperature control, alarm, and control – Optional with extra sensor. Free configuration and diagnostic software, Free android APP and WEB.Cloud service with Software for Mobile / Tab’s / PC’s. -1Set with each panel (Mobile / Tab’s / PC’s at extra cost). 2. Central alarm monitoring at security through cloud-based software (With out ant receiver) with PC/TAB (PC / TAB at extra cost). Make: compatible with Apollo/ Cooper/ Notifier/ Honeywell protocol Fire alarm panel as per international communication protocol standards
Refurbishing works of IMDC rooms and allied works in New Campus at Indian Institute of Management Ahmedabad
Section 300-HVAC and allied works
MEP Civil Works for LINAC Bunker at Barpeta
HVAC Works
Renovation of Old AC Plant for Temporary Arrangement of Additional CCR Hall at NSCBI Airport, Kolkata (Electrical Works)
SH C: HVAC SYSYTEM SITC of 4 TR, three phase, floor mounted, spilt-type, inverter Airconditioner with indoor unit fitted with copper evaporator and copper condenser, sealed compressor, operating on eco-friendly refrigerant, suitable for 415 V +/- 10 %, 50Hz, 3-Ph A.C supply, capable of performing cooling, dehumidifying, air-circulating, filtering etc. with remote controlled operation, including fixing the outdoor unit with duly painted suitable guage iron stand/bracket and fixing of Indoor unit including hole cutting, drilling and making connection of copper refrigerant pipe (liquid line & suction line) and multicore cable in both outdoor & indoor units, pvc drain pipe connection and first charge of eco - friendly refrigerant etc complete as required as per technical specification and site condition.