Dam & Barrage Tenders in Tamil Nadu

Mettur Workshop LM section IV Manufacturing of electrical line materials Welding of Channel cleats with angle for fabrication of LTTI Fittings including Lifting and Transporting Painting and delivery at central stores for the month of June 48000

Partial Fabrication of 5 Feet V Channel cross arms for the month of March 10000 Nos

Procurement of RSB Multi Peak Emitting Electrode as per drawing enclosed 1950 Nos

Welding, Bending, Greasing of threaded portion painting and delivering as 11 22 lines Stay Rod

Residual Life Assessment Study in Unit II Boiler of Mettur TPS I

Laying of loco track with cold bending of rails from high mast light to northern side of central stores yard 87 Rm including Gas cutting of Galvanised MS Angle 45x45x6mm, Welding of Galvanised 45x45x6mm MS Angle for the fabrication of MS channel 95x4

Mettur Workshop LM section VIII Fabrication of Three and half Feet V Channel cross arms

Mettur Workshop LM section VIII Manufacturing of electrical line materials Partial Fabrication of 5 Feet V Channel cross arms 10000 Nos

Name of Work Mettur Workshop Welding of channel cleats with angle for fabrication of LTTI fittings including painting and delivery of final product as LTTI fittings within Mettur work shop central stores premises 65000 Nos

Procurement of SS diffuser (Inner) With Flame steady ring (To with stand temperature up to 1500C) for opposed wall firing coal burners (centrifugal casting) 15Nos

Transporting, Welding, Bending, Greasing of threaded portion, painting of 11/22KV stay Rod AS per Drawing including receipt of cut lengths from workshop and delivering as Stay Rod 11-22KV along with supply of M14MS Nut and Washer at Workshop, cost o

Welding of channel cleats with angle for fabrication of HTTI fittings including lifting of partially fabricated HTTI fittings painting and delivery of final product as HTTI fittings at Central Stores premises

Patch up welding of eroded and worn out portion of Mill branch hot PA duct Patch welding of HAG HAD outside frame eroded wall portions Providing of vertical dummy plate at mill branch hot PA duct for arresting of hot air passing from the HAG

Gang Switch Section (LM-9) - Painting of New transformer structure parts with clamp for 11/22 single pole (Two coat Red oxide paint) including material handling and cost of consumables 6000 Sets for the month of March

Mettur Workshop LM section VIII Manufacturing of Electrical line materials Fabrication of 3 and half Feet V Channel cross arms for June 2021 to a quantity of 12000 Nos

Sprinkling of water over the roads inside MTPS-II for dust suppression purpose for the period from 14.06.2021 to 31.10.2021

LM section -IV- Welding of Channel cleats with angle for fabrication of HTTI Fittings including, Lifting and Transporting, Painting and delivery at central stores - 48000 Nos

Supply of S S 304 Pipe 12 Mtr

Spares for KG KHOSALA Make Air Compressor Model 2HA2QT Motor Pulley 2 items

Mettur Workshop Manufacturing of Electrical line Materials LM VIII section Cutting of M S Flats 50 x 8 mm into 76mm length within central store premises including cost of consumables shifting from place to place handling and stacking the cut lengt

Procurement of Spares for Electrical Actuator (6 items)

Bending of stay eye bolt for 33KV line - AS per drawing - including receipt of cut length from workshop, transporting, threading, bending, welding, painting and Delivery with M18 GI Nut and stacking of Eye Bolt at Mettur work shop 50000 Nos

Operation of pumps for filling water in water tanks, upkeeping of silt pits and drains in the residential quarters of MTPS-II in Thermal nagar-11 a period of 180 days from the date of

Providing Cladding sheet to the Store room, Cupboard arrangements to the section office in the Dozzer Shed, providing concrete steps to the Storage water tank in the PTP area and other misc

Mettur Workshop LM section VIII Manufacturing of Electrical line Materials V cutting and cleat punching for Partial Fabrication of 3 and half Feet V Channel cross arms 19200 Nos

MTPS - II - Civil Circle - Operation of pumps for filling water in water tanks, Upkeeping of silt pits and drains in the residential quarters of MTPS-II in RE quarters and near LIC

Procurement of solenoid with coil, limit switches, Metallic air hose-9 items

Painting of single Ph LT Channel Cross Arms Including material handling and cost of consumables 50000 Nos for the month of April-2021

Supplying and laying of GI pipe line from OHT to Hydrogen Gas Generation Plant to provide uninterrupted service water supply to H2 Plant and relaying of drinking water line to Chinnakavoor village from drainage to above Gr

MTPS 1 Operation Circle TS Provision of one number Diesel driven Van of seating capacity 9 and above including driver on hire basis for the Official use of Executive Engineer Technical Services and Executive Engineer Central Maintenance and Plan

Procurement of RTDs in Mill Fan Area 16 Items

Providing Drain arrangements and Slope protection arrangements on the South side of vehicle washing shed in silo of MTPS-II.

Upkeeping and removal of dust and dirt in Chemical house, clarified water pump house, roads and drains in PTP area, RWPH and Stores area for a period of 180 days from the date of commenceme

Procurement of Spares for Smart Positioner With External Position Detection System EMC Filter Module with its Mounting Accessories 6 Sets

Operation of pumps for filling wate tanks, upkeeping of silt pits and drains in the residential quarters of MTPS-II in Thermal Nagar-11 for the period from 01.09.2020 to

Providing the RCC drain with cover slab in south side of control room at K.R.Thoppur 400KV SS Thoppur

PROCUREMENT OF HFO HEATERS STEAM OIL LINE VALVES 7 ITEMS

Dismantling of existing damaged Masonry rain water drain and Providing the RCC drain from Southern side of SS yard road to compound wall at K.R.Thoppur 400KV SS.(Ch.13.00m to 26.00m).

Providing foundation concrete and brick wall for the newly proposed vertical sulphuric acid storage tank near CWPH and

Annual Overhauling 2021 - Cleaning of forebay of cooling water pump house and disposal of deposited silt / slush, cleaning of drains around NDCT and other miscellaneous works in forebay area etc

Mettur Workshop Line Material section VI fabrication of four and half Feet V Channel cross arms Qty 13000 Nos

Dismantling and removing of a portion of existing damaged loco track from LM5 section to LM1 section and relaying of loco track with cold bending of rails from LM5 Section to LM1 section and LM6 section shed to main line including welding of rails

Up Keeping by removal of dust and dirt in all doors and operating the valves of water supply lines of ESP andMCC building, ETP MCC room,

Supply of spares for Rice Lake make 100T Weigh Bridge-2 Items

Providing concrete flooring in the Main Oil Tank MOT room at 0m floor of STG Building, Providing vehicle parking shed near Dry House I and other Miscellaneous works in STG building area of

Painting the external wall surface of Chimney with two coats of best quality enamel paint of approved make and colour in alternate bands of red and white up to EL 225m and acid resistant paint from EL 225m to 275m at MTPS-II

Providing Concrete pavement on the South east corner and other miscellaneous works etc. at the Store scrap yard of MTPS II.

Providing flooring and side protection to the oil storage shed in coal handling plant area.

CI Outsourcing Works

Providing service water pipe line in burner elevations of Boiler at 17m, 24m, 28m, 32m and 36m levels and providing 1No. septic tank and service water pipe lines