Electrical Panel & Switchgear Tenders in West Bengal

Operation AND Supervision of wall mounted Control panel along with its accessories at Rabin Sangha Club DPS.

Supply and Installation of 35 KV KOEL Green DG Set with Standard Control Panel, CPCB II Regulations

Operation maintenance of Pump along with wall mounted Control panel and its accessories at Belilious Lane DPS

Operation maintenance of Pump along with wall mounted Control panel and its accessories at Benaras Road DPS

Submersible Pump along with motor and Accessories for handling gypsum Slurry, Control Panel for submersible slurry pump

Operation and Supervision of wall mounted Control Panel along with its accessories at Rabin Sangha Club DPS

HIGH MAST POLE, LED FLOOD LIGHT, WIRE, CONTROL PANEL, EARTHING, CABLE, SIGN BOARD BOQ Title BOQ ITEM

Installation of SMDB and other electrical panels for proper phase balancing at R.H.S Workshop under Road Roller Department.

Supply and delivery of 03 sets resin cast bottle holders along with servicing of 3 nos 11KV VCB including replacement of the same for 900 MW PPSP Power House, WBSEDCL.

Construction of VCB, CT ,PT structure along with cable trench , loop and other allied civil works with renovation of CRB at Pandapara 33/11 KV sub-station under Jalpaiguri Division.

Construction of VCB, CT foundations and control cable trench to facilitate new 33 KV Feeder Bay at Kuthighat 33/11 kV Substation under Ghatal Division in Paschim Medinipur Region, WBSEDCL

Air filter for air connection assly. of single bottle VCB ( Make M/s. Schneider Elect. ) for Locos and EMUs as per M/s. Schneider Elect. Infrastructure Ltd. part no. 5110010.

Supply , installation and commissioning of 125 mm (Dia.) Industrial rubber soul wheels or VCB rake for smooth trouble free movement .Specification : 1) Wheel diameter : 125 mm minimum, 2) gross carryi

Development of Tourist complex at Sabuj Dweep in the District of Hooghly - External Landscape Illumination, Switch Gear and Sub Main Distribution.

REPAIR/ MAINT TO LT UG CABLE, LT SWITCH GEAR PANELS AND ALLIED WORKS AT CH (EC) COMPLEX UNDER GE ALIPORE KOLKATA

MOTOR LIMIT SWITCH, MNX80 Power Contactor, MNX140 Power Contactor, 3 POLE POWER CONTACTOR MNX 25 to 25A, BIMETAL OVERLOAD RELAYS, BIMETALLIC OVERLOAD RELAY, Power Contactor MNX 32 to 32A, 3P AIR BREAK POWER CONTACTOR MNX 40 to 50A, 3P AIR BREAK POWER CONTACTORS MNX 50 to 50A, Thermal overload Relay, ADD ON BLOCK MNO 22E, RELAY THERMAL OL WITH SINGLE PHASING PROTECLION, 3P AIR BREAK POWER CONTACTOR MNX 09-09A, ADD ON BLOCK MNO A1, BIMETALLIC OVERLOAD RELAY .45-0.75A, POWER CONTACTOR SPARE KITS, 3P AIR BREAK POWER CONTACTOR MNX 70 to70A, 2NO 2NC AUXCONTACT BLOCK FOR MNX 9 to 40A, 1NO 1NC AUXCONTACT BLOCK FOR MNX 9 to 40A, SPARE CONTACT KIT FOR MNX 18, SPARE KIT WITHOUT COIL FOR CONTACTOR, SPARE CONTACT KIT FOR MNX 40, SPARE CONTACT KIT FOR MNX 80, SPARE CONTACT KIT FOR MNX 95, SPARE KIT WITHOUT COIL FOR CONTACTOR TYPE MNX110, SPARE KIT WITHOUT COIL FOR CONTACTOR TYPE-MNX140, THERMAL OL RELAY TYPE-MN2, BIMETALLIC OVERLOAD RELAY 0.9 to 1.5A WITH SPPTY MN2, BIMETALLIC OVERLOAD RELAY 2 to 3.3A WITH SPP TY MN2, BIMETALLIC OVERLOAD RELAY 4.5 to 7.5A WITH SPP TY MN2, BIMETALLIC OVERLOAD RELAY 66 to 110A WITH SPP TY MN5, POLE ASSEMBLY, BREAKER JAW CONTACT, TEST OR ISOLATED POSITION MICRO SWITCH RIGHT, TEST OR ISOLATED POSITION MICRO SWITCH LEFT, FIXED ARCHING CONTACT, SPRING CHARGING MOTOR, CLOSING COIL, SHUNT RELEASE, POWER CONTACTOR MNx18A, POWER CONTACTOR COMPLETE ASSEMBLY MNX110, SPARE CONTACT KIT FOR 3 POLE POWER CONTACTORTYPE MNX32, Thermal overload bimetal relay with single phasing protection mounted on MNX type contactor, THERMAL OVERLOAD RELAY MN5, MAIN CONTACTOR TYPE MNX95, 1NO AUX CONTACT BLOCK FOR MNX 9 to 40A, SERVICE POSITION MICRO SWITCH LEFT, THERMAL OVER LOAD RELAY TYPE MN2, CLOSING COIL 240V DC ACFOR C-POWER 1250A, SPARE CONTACT KIT FOR MNX 50, SPARE COIL FOR MNX 95 to 140, BIMETALLIC OVERLOAD RELAY 180 to 300A, BREAKER CRADLE TERMINAL 4000AH, SERVICE POSITION MICRO SWITCH RIGTH, SPARE COIL FOR MNX 45 to 80 MOTOR LIMIT SWITCH, FOR C-POWER, AIR CIRCUIT BREAKER, 4000AH, 415V, 50Hz, 3P, 50Hz, EDO SPARE, Make: L&T, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 80-80A with AUX.CONT-2NO+2NC& COIL-240V AC, CONTACTOR, 415V, MNX 140-140A WITH AUX.CONT- 2NO+2NC& COIL-240V AC, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 25-25A WITH AUX.CONT-1NO& COIL-240V AC, Make L&T, BIMETALLIC OVERLOAD RELAY(6- 10A)WITH SPP, TYPE-MN2, Make: L&T, BIMETALLIC OVERLOAD RELAY(20-33A)WITH SPP, TY-MN2, Make : L&T, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 32-32A, COIL-240V AC, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 40-40A, COIL-240V AC, Make : L&T, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 50-50A, COIL-240V AC, Thermal overload Relay MN2, Range 3-5Amp, Make-L&T, ADD ON BLOCK(2NO+2NC)-220V AC, MNO 22E, RELAY THERMAL O/L WITH SINGLE PHASING PROTECLION RANGE 1.4-2.3AMP, Make : L&T, 3P AIR BREAK POWER CONTACTOR, 415V, MNX 09-09A WITH AUX.CONT-1NO& COIL-240V AC, ADD ON BLOCK(4NO)-220V AC, MNO -A1, Make : L&T, BIMETALLIC OVERLOAD RELAY(.45-0.75A)WITH Bid Details 2/54

MOEI & fans including RMO motor pump sets i/c compound light for 42 Nos. quarters, international hostel, guest house, institute building of AIIH & PH, second campus at Salt Lake, Kolkata during 2025-26 (SH: Servicing, overhauling of 1 No. 630 KVA ... Nos. LT Panels , ...

Set of indication lamps as per for 3 phase locos as per CLW Spec. No.- CLW/ES/3/0072 (Alt.-G) Firms offer:OFFER- Make TEKMEC SWITCHGEAR&CONTROLS, Brand TEKMEC As per CLW Specn No. CLW/ES/3/0072/Alt.G.

Facility Management Services - LumpSum Based - Engaging outside contractual agency for miscellaneous jobs at Transformer and Switchgear Shop of NCW for a period of one year (301 days) as per Annexure A and B; Engaging outside contractual agency for m..

Supply, Installation, Testing and commissioning of Current Transformers, restoration of HT panel and associated electrical works at Sirity Burning Ghat

SUPPLY, INSTALLATION AND COMMISSIONING OF SPLIT TYPE AC MACHINE AT HT PANEL ROOM OF MAYER GHAT RAW WATER PUMPING STATION.

Supply, Fitting and Fixing of LED Light (30watt,90watt and 120watt) in poles and Feeder Pillar Box at Different Roads and Places within Baruipur Municipality Area. ( under Green City Mission).

Moulded Case Circuit Breakers (MCCB) Conforming To IS/IEC 60947 (Part 2) (Q2), Soap Dish - Case (Q4), Bell push MODULAR TYPE, Cover plate for modular switch 2 modular, Cover plate for modular switch 3 modular, Cover plate for modular switch 8 modular, Modular stepped type regulator, Modular Switch 10A 1 Module with cover plate complete, Modular Switch 20A 2 Module with cover plate complete, Modular type switch 16 Amp, Switch socket combination Delux 6 Amp piano type, with shutter and 2fixing holes, surface mounted indoor commercial green square LED luminaries 20 Watt size 2 x 2 Feet, Geyser hot or cold water ss connection pipe 600m long, Casing N caping of size 25 x 16 mm Double locking System, Tape insulation off sizes 25MM x 25 mtr

Manufacture, testing, supply and delivery of SCADA Compatible 11 KV Outdoor Non-extensible 4 Way 2 nos LBS and 2 nos Feeder Ring Main Unit for oil cooled 630KVA and 315 KVA Transformer

IMPROVEMENT OF DAMAGED ELECTRICAL PANEL AND ALLIED ELECTRICAL WORKS AT OUTDOOR DEPARTMENT UNDER EWS.

Thorough renovation of the shed of Electrical Panel Room at Howrah Depot of WBSTC

ROOF TREATMENT ABOVE ELECTRICAL PANEL ROOM FOR PREVENTING SEEPAGE OF WATER AT BEHALA BPS

Repair and Renovation work for the ground Floor Electrical Panel Room At Banga Bhawan

Repairing of electrical panel and allied works at DPS, AA-IIIC under NTK Project.

ANNUAL MAINTENANCE CONTRACT OF HT SYSTEM INCLUDING TRANSFORMERS, VCBS, MAIN LT PANELS ETC. IN KASHIMITRA BURNING GHAT AND COSSIPORE MAHASMASHAN UNDER BR.-I.

SPL REPAIR TO LT UG CABLE, LT PANELS, STREET LIGHT TUBULAR POLES AND CONNECTED WORKS AT SAHAPUR MIL CAMP UNDER GE (C) KOLKATA

TESTER, HND DRVN INSLTN, MEGGER 2.5 KV, CABLE, 1.1 KV, 2C, AL, PVC, 6 MM2 ARMRD, CIRCUIT BREAKER, MCCB, 250A, 415V 3 PHASE, NEW CONTROL PANEL ASSEMBLY WITH UPTO 750MA, THERMAL OVERLOAD RELAY, ENCLOSED IMPELLER, BALANCE VALVE, SET OF TWO BEARING BUSHES, CABLE, 1.1 KV, 3C, CU, PVC, 35MM2, FLAT

Molded Case Circuit Breakers (MCCB) as per IS/IEC 60947 (Q3), MCB - Miniature Circuit - Breakers for A.C. Operation as per IS/IEC 60898 (Part 1) (Q2), LED Luminaire (Recessed Luminaire) (V3) Conforming to IS 10322 (Part 5/Section 2) (Q3), LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3), LED Luminaire for Floodlight (V2) Conforming to IS 10322 (Part 5/Section 5) (Q3), Bayonet Lampholders (V2) ISI Marked to IS 1258 (Q2), Non - Modular Piano Type Domestic Electrical Switches as per IS 3854 (Q3), Electrical Terminals as per IS 8309 (Q3), PVC Insulated Unsheathed Cable with Flexible Conductor as per IS 694 (Q2), Piano Type Non Modular Domestic Electrical sockets - IS 1293 (Q3), Electrical Plugs (V2) ISI Marked to IS 1293 (Q2), Casing Capping 20mm, Casing Batten Clip 1 inch pack of 100 pcs, Casing Batten Clip half inch pack of 100 pcs, PVC Casing Capping 15mm, Polyethylene water storage tank 3 layer 1000 Ltrs, Polyethylene water storage tank 3 layer 500 Ltrs

Supply and installation of MS fabricated hinged type cubicle panel board (MCCB Panel Distribution Box) made of 14 SWG, MS sheet duly powder coated. Make: - L&T/ABB/C&S/SIEMENS. Specification as per Dr

Moulded Case Circuit Breaker (MCCB) VL 250. Conform to IEC/IS 60947-2, rated for 250 Amps, Type 3VL3725-2DC36-0AA0 with adjustable overload (200 to 250 Amps) & adjustable short circuit (5 to 10 times

MCCB 63AMPS 25KA 4 POLE WITH RSCB CAPACITY OF 25KA TRIPPING RANGE WITH RATED VOLTAGE 240/415V ,50HZ.CONFIRMING TO IS/IEC:60947 part-2:2003 OR latest.ACCETABLE MAKE: C&S, HPL, ABB, SIEMENS,LEGRAND,HAV

MCCB 63AMPS 25KA 4 POLE WITH RSCB CAPACITY OF 25KA TRIPPING RANGE WITH RATED VOLTAGE 240/415V,50HZ CONFIRMING TO IS/IEC:60947 part-2:2003 OR latest:ACCEPTABLE MAKE:C&S,HPL,ABB,SIEMENS,LEGRAND,HAWELLS,

Moulded case circuit breaker [MCCB], 4-pole, capacity 200A,rated voltage 415V,50Hz,3-phase AC, conforming to IS:13947 [pt. 1 & 2] / IEC 60947- 1 & 2, breaking capacity 35 KA, insulation voltage 690 V

Annual Maintenance estimate of the E.I. work at MCH Building of BSMC and H, under B.M.C Electrical Section-I, PWDte. Bankura.------ Repair of MCH LT Panel and OPD building 2 nos LT panel and MCH building 2 nos panel under BSMC and H, Bankura.

Installation of 4 panel O/D RMU, erection of 315 KVA DTR and laying of 11 KV HT, 1.1 KV LT cable for effecting NSC i.r.o. S. N. Swarna Sagar Apartment, project by S. N. Consultants Pvt. Ltd.at Barrister Colony at Digha CCC under Contai Divn,WBSEDL

All as per BOQ

Providing and installation of 33KV terminal arrangement with VCB and CR Panel at substation at WTP under Balia surface water Based W_S Scheme Block_ Sagardighi Dist_ Murshidabad under MEDB PHE Dte

Erection and Commissioning of 33 KV CR Panel, 33 KV VCB and CT (Equipment), Cable Laying, Switchyard Painting, Earthing of switchyard at Pandapara 33/11 KV Sub-Station under Jalpaiguri Division.

Construction of Transformer Plinth, VCB, CT, Cable box support structure, cable trench and Crushed stone spreading at Mobarakpur 33/11 kV sub-station under Gazole Division, in the district of Malda

Transportation and placement of VCB, TSU, cables, and ACBs for 49D substation on civil foundation in between 0L and 2L in R V seam for CM 1 section in MIC JPC

Construction of CT, VCB, Transformer plinth, cable support box foundation, Cable trench, Pathway, Switchyard development and allied work at Jeerat 33/11KV Sub-station under Barasat Division, 24Pgs(N) Region, WBSEDCL

Pressure Gauge suitable for Schneider make 22CB VCB of WAG9 locomotive similar to Schneider part No. NPRM51105400 or equivalent having specification; 2" dial with white background, Brass 1/8 BSPT with

Supply, Installation, testing and commissioning of AC high voltage test set capable giving out put voltage 0-75Kv at 150mA for VCB testing as per Annexed technical specification attached. Make/Brand-

AOH KIT TO Part.NO 5510740 for Single Bottle VCB type 22CB of M/s. Schneider Electric Infrastructure Ltd. Consisting of 15 items .As per Annexure Attached. Accepted firm's offered make: Schneider

Overhauling of 33KV Breaker and LT panel with allied works at WTP (Phase-II), AA-I under NTK Project.