Fabrication Tenders in Jammu and Kashmir

Fabrication and installation of new Gate along with allied works at various distributary of main Kathua Canal.

Fabrication, providing and fitting of MS foot valves at various Lift Irrigation Schemes of sub-division Pattan.

Design, fabrication, carriage, installation, testing and commissioning of 140 ampere LT control panel at pumping station Khoon.

Design Supply Fabrication and Installation of Chain Link Fencing at GFPN Beril Kathua along with allied works

Fabrication, providing and fitting of T- Junction, dismantling joints and delivery pipe for Lift Irrigation Scheme Aadipora.

Fabrication and providing of shear pins for Snow Cutter (Rolba 3000) of Snow Clearance Control Unit Tangmarg.

Complete overhauling/repair of 16.5HP diesel engine dewatering pump set and design, fabrication, fitting of Towable Trolley

Fabrication and erection of iron sheet shed and other allied works under WSS Gura Kalyal under JJM

Fabrication and providing of MS casing pipe and other allied works at TW Gurha Mundian in Hiranagar

Fabrication, Supply, Surface Treatment (Hot Dip Galvanized) and Delivery of Main Drive Column (Ski Drag Lift Kongdori)

Repair and gas welding of fuel tank of ALS, Repair and servicing of front axle of MG, Repair of blower assy of Tata 2.5 ton, Brazing of fuel tank of Maruti Gypsy 413 MPFI, Repair and overhauling of rotary pump of MPVY

Fabrication of MS platform in pumping station , MS stairs from platform to ground level, fabrication of base frame, foundation block and saddle block for suction line of newly installed pumping unit no 2 along with allied works at Lift Irrigation St

Supply of 8mm dia 6.71 FMC Steel Wire Rope, Fabrication oblique Supply Gear 1 x 8 x 24 inch TD, Fabrication of chain 1 inch D comma 10 ft with chain lock, Techno Tonics 100 percentage copper premium industrial welding Cable 37.5 Gauge, Welding Rod, ... Inch, Welding Rod ...

Supply, fabrication and successful launching of mobile plastic pontoon based boat

Custom Bid for Services - REPAIR AND MAINTENANCE OF ELECTRIC WELDING MACHINE BANDCIRCULAR SAW MACHINE ANGLE GRINDER BRUSH CUTTER AND UP

Custom Bid for Services - REPAIR AND MAINTENANCE OF ELECTRIC WELDING MACHINE BANDCIRCULAR SAW MACHINE ANGLE GRINDER BRUSH CUTTER AND UPS

Construction of deep drain from shop of Mohan Welding via Jhanger Chowk upto H/O Bisham Sharma W.No. 9 Nowshera

Repairs maintaiance to sheds of LIS Astanpora and LIS Bemina by way of welding of existing trusses and CGI sheeting.

Supply fabrication and successful launching of plastic pantoon based boat for WSS Malganipora under District Capex 2024-25

Supply and Installation of Water Tank and Fabrication of Water Tank pedestal for RO Unit at SDH Bhaderwah

Fabrication, Manufacturing of 25KVA Voltage Stabilizer along with allied electro-mechanical works at pumping station Dalogra Stage 1st .

Fabrication and Providing of Bukharies fabricated out of 18 gauges MS Sheet of Snow Clearance Control Room Tangmarg

Design, Fabrication and Installation of new gates of Old bays at Head works Akhnoor of Main Ranbir Canal

Laying and fitting of pipes and Fabrication of CGI Sheet Pump House for WSS Binner Dangerpora under JJM

Entrance Shed Gate No2 fabrication consisting ofIron Pipe 394 Kgs CGI Sheet65 Kgs Screw 2 inch 500 nos

Fabrication of new gate at distributory for escape Channel near GHSS along with allied works at Gajanso Marh.

Supply,Fabrication and Launching of Steel Super Structure of 28mtr span Foot Jhulla Bridge at Mohalla Cheeran Fazlabad

Design, fabrication, installation, testing and commissioning of suitable LT control panel at pumping station Jib stage-1st (Old)

Design fabrication and installation of Escape gates near D-5 of main Kathua Canal along with allied works

Design, Fabrication and Installation of new gates connected parts at Head Gates at Marallian along with allied works.

Design, fabrication, supply, installation, testing and commissioning of passenger lift on turnkey basis at Munsiff court complex, Billawar

Fabrication of Muff Coupling for 900VM-2 60 cusecs VT Pumps of installed at Tawi Pump House, Jammu.

Fabrication of distribution conduit for parallel discharge tubes of Tawi Feeder Channel in Nikki Tawi with allied works

DESIGN FABRICATION AND ERECTION OF JJM HOARDINGS 27 Nos UNDER THE JURISDICTION OF JAL SHAKTI PHE DIVISION RAJOURI

Design/ fabrication/ installation of shed for keeping store inventory with allied works in divisional store of MID Jammu.

Design, Fabrication and erection of JJM Hoardings under the jurisdiction of Jal Shakti (PHE) Division Samba under JJM

Fabrication and installation of fixing of various mild steel works in Jambu lochan boys hostel at New Campus

Fabrication of Snow Plough Lateral Mounting Plate for Snow Clearance machines pertaining to Snow Clearance Control Room Badgam.

Fabrication and erection of colour coated corrugated iron sheet shed at P S Thana Stage I in Basholi

Design fabrication installation testing and commissioning of LT Control panel and other allied work at TW Patel Nagar

Fabrication and installation of MS Trash Rack at Gurwal to be installed on Tawi Canal of RTIC Jammu.

Fabrication of medal/Citation and Track Suits for grant of Sher-i-Kashmir Sports Award and Parshuram Award.

Design, fabrication, installation, testing and commissioning of 150 amp LT Control Panel at Seri Stage-II in Basohli

Please refer in BOQ

Construction, fabrication and erection of CGI protection shed for pressure filter plant

AT welding of Rail in c/w TSR(P)-36 km on Banihal-Baramulla section of Jammu Division under ADEN/BDGM.

Design/fabrication/construction of overpass structure to support Medical Oxygen Pipeline from Oxygen generator plant to MGPS at district Hospital Kishtwar.

Fixing of rate contract for Handling and Fabrication of various materials in Divisional Stores at Doda under the jurisdiction of Electric Division JPDCL Doda

Providing and fixing of false ceiling by way of providing structural steel work and other allied works at IME Bhaderwah Building at University of Jammu Bhaderwah Campus

Unbranded "As per specification for "Copper coated solid wire for, Unbranded "As per specification for "Copper coated solid wire for CO2 gas shielded arc welding UTS: 480 MPa"", with standard C4002 BEML Welding Electrode prepared and approved by BEML LTD, OFFICE OF THE ASSISTANT GENERAL MANAGER, CORPOR 1.2 millimeter