Fabrication Tenders in Jammu and Kashmir

Fabrication, providing, fitting and testing of semi closed type impeller (SS-304) for 70 cusec mixed flow vertical turbine and mechanical repairs to damaged bell mouth of pumping unit 3 at LIS Marval Stage 1st

Design/ Providing/ Fabrication/ Fitting/Installation/ testing and commissioning of 11KV HT panel for 4 Nos 500 KW/670HP ,150000 GPH X 250 mtr Head HT pumping Unit of HT Pump House under State Capex budget

Fabrication of Foundation Platform at intake for installation of VT pump set along with standby and Providing installation testing and commissioning of Pumping machinery at Filtration Plant WSS Kalakote Town Under Languishing Project Kalakote Town

Design, fabrication, installation, testing and commissioning of FASD starter for unit III along with their allied works at LIS KatalBatal and replacement of foot valve of unit III along with allied works at LIS Dharap.

Providing and fitting of electro mechanical components alongwith allied works at pumping station Kaghote and design, fabrication, carriage, installation, testing and commissioning of 110 ampere LT control panel along with allied works at pumping st

Providing and fitting of electro mechanical components alongwith allied works at pumping station Khein and design, fabrication, carriage, installation, testing and commissioning of 70 ampere LT control panel along with allied works at pumping statio

Providing ,Fabrication, installation, testing, commissioning and carriage/shifting of LT control panel 415 volts, AC-3 Phase, 50 Hz. for operating of HCP set 10000GPH X 290 MH X100 HP at Filtration Plant Kalakote Town

Fabrication of new gates of Khul 8500 of D2B and GaidlaKhulat Main Ranbir Canal, Repair to gates of Marh area and Repairs to 250 KVA Electrical Transformer along with allied works at LIS Manyal Brahmna

SITC of 8x8 Oxygen Manifold along with fabrication of Structural Steel Canopy / Protection shed and other repair / replacement works related to vacuum and medical air supply for newly ICU and Operation Theatre at GMC Baramulla.

Design, fabrication, installation, testing and commissioning of floating jetty I-float and providing, installation, testing and commissioning of 10000 GPH x 100 m head SPS including other allied works at Seri Stage-I in Basohli.

Custom Bid for Services - Repair Maintenance of Trash Rack Cleaning Machine TRCM Fabrication of MS ladder and Overhauling of culvert intake TRCM at Barrage Complex Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Engraving Machine, Drift Punch Set, Screw Driver set, Magnetic Stick, Measuring Tape 5 mtrs, Welding Gloves, Welding Appron, Nose Plier 200 mm, Lan Tester, Crimping Tool, Iron Drill bit set, Welding Googgles, Wall drill bit set

Drift punch set, Screw driver set, Magnetic stick, Measuring tape 5 Mtrs, Welding Gloves, Welding apron, Nose Plier 200 mm, Lan Tester, Crimping tool, Iron drill bit set, Welding goggles, Wall drill bit set, Engraving machine

Welding Rod CI, Electric Welding Rod, Rust Solvent, Propyl Alcohol, Insulation Tape, Refrigerant Gas, Foam Sheet 6x3x3, Plywood General Purpose 5 ply

Aero Spray, Anabond, Feviquick, Thread Tape, Welding Rod

Drone, Welding Cable, Diffuser, Brass Seal, Capping Casing

Cutter blade 4inch, Welding rod, Hand grinder machine

VICE, PROTABLE WELDING MACHINE 200AMP, ROTARY PUMP VICE

Canvas Cloth, Gas Welding, Green Carpet, Samsung mobile

Anti-Drone Measures (Pole, Binding Wire & Welding Rod

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; PORTABLE PREFABRICATED SEURITY GUARD SHED WITH SIZE 6X6FT WITH STEEL STRUCTURE, CEMENTED PANELS, ALUMINIUM DOOR AND WINDOW; Service Provider

Maint.of of pipe D.S, T.Ms and sub mains by way of replace of damaged ones with all items/ fittings (by way of restoration of old RWM for WSS Nengerpora ,replacing old damaged pipes and welding ) under M and R.

Providing and fitting of electro mechanical components along with allied works at pumping station Ramnagar and design, fabrication, carriage, installation, testing and commissioning of 70 ampere LT control panel along with allied works at pumping sta

Fabrication of Brush Holder Assembly with copper Carbon Brushes for 1000 HP/ 750 KW HT Slip ring Induction motors and Rubber Bearings for 6 No. VT Pumps of 900 VM-2, 60 cusecs installed TPH, Jammu

Design, fabrication, installation, testing and commissioning of LT Control panel fully automatic unmanned type for the operation of upto 35 HP submersible motor at Bore Well Parliwand and 75 HP sub. Motor at tube Well Parliwand

Design, fabrication, supply, installation, testing and successful commissioning of outdoor type L.T main control panel to be installed for providing of electric supply to 10MGD Filtration Plant Doodhganga from standby 1.6MVA 33KV,440V H.T L.T Transfo

Laying of Tower foundations / Chain link fencing for Gantries, Protection Walls, Fabrication of lattice type Galvanized Tower structures, supply, erection, laying and stringing of conductor and OPGW , testing and comm. of 132kv Ircon Budgam tr. Line

Design, fabrication, installation, testing and commissioning of LT Control panel fully automatic unmanned type for the operation of upto 30 HP submersible motor at Housing Colony Kukechak and 50 HP sub. Motor at Housing Colony Old.

Facility Management Services - LumpSum Based - Hospitality; COMPLETE JOB INCLUDING PROVIDING FABRICATION AND ERECTION OF PRE FAB STRUCTURE IN ALL ASPECTS WITH REQUIRED NO OF PARTITIONS AS PER BOQ ATTACHED; Consumables to be provided by service provid..

Design Supply Installation Testing Commissioning of one 01 MRL machine room less lift including Design Construction of RCC MS Structure with Brick masonry properly framed and enclosed legal elevator hoist way structure for the lift outside the buil

Insulation Tape, Soft face hammer with plastic handle, Welding Rod, Heavy duty cordless angle grinder and cutter kit bosch, Gas welding brazing powder

soldering wire, soldering paste, armed welding rod, electrodes welding cast iron, cable power, CTC, hard board, cable 2 core, adhesive dunto 75 dentre

ARMED ROD, WELDING RODS ELECTRODE, 50 FT DUAL LENS BORESCOPE ENDOSCOPE, CUTTING BLADE 4 INCH, CUTTING BLADE 7 INCH, WELDING HOLDER, FACE SHIELD

Grinding wheel, Welding Rod, M Seal, Leather Cloth Black, Insulation Tape Elect, Cutting Wheel, Thread Tape, Electrolyte, Armd Welding rod, Soldring Wire, Araldite

Front wind screen BP glass 2 5 Ton tata, Grinding wheel 4 inch, Cutter wheel 4 inch, Welding face shield glass, Welding rod

Mega Phone, Kero heater 5 ltr, Hand gloves, Iron cutter machine, IGBT welding Inverter, Welding cable, Angle Grinder Machine, Kero wicks, Plastic Tripal

Customised Dolly Structure, High Torque DC Brushless Motor, High Quality Noiseless Wheel Gear, Advanced Electronic Speed, Wireless Remote for Dolly Control, Customized Printed Circuit Board, 100W Solar Panel, Battery Set less or equal to 16000mAh and 7000mAh, CCTV Svl Camera 8MP Full HD, Wireless Video Transceiver, Wireless remote for Camera, Synthetic Rope 300mtr coil, Safety Rope 300mtr, Customised Anchorage Structure

Pipe cutter cutting blade 14 inch, Plywood 12mm 8 ft x 4 ft, Distill water, Flat iron patti 1 inch, Jali iron 1ft x 1ft 10 gauge, Leaf portable blower

Iron frame with square pipe, Plywood 19mm, Plywood 12mm, PVC Wall Paneling, Aluminium Partition with Frosted Glass and Sliding Door, Notice Board, Black out fabric rollers, Fevicol SR, Labour Charge and transportation of material

Wifi Camera, MMC 128 GB, 260 MAH B, Wheel, Motor 100W, 35 20 bms, Bit Set, 775, Pump 12v, L-298, 5 Ltr Can, 60 Ltr Can, Prex, Relay Module, Santi Kit

PARTIAL ARMOURING (FEBRICATION) OF TATA 407 MEDIUM VEHICLE MODEL 2019 REGN NO. JK-02CG-1987 AS PER SPECIFICATION PROVIDED BY INSPECTOR GENERAL SRINAGAR CRPF

CLAMP METER, DIGITAL HYDRO METER, CHIN PULLER 3 TON WITH TRIPO, NOSE PLIER FOR THRUST WASHER REMOVING, PISTON RING CLAMP, WELDING CABLE 10 MTR, AUTOMATIC WELDING HELMET, WELDING HOLDER, DRILL MACHINE LIGHT DUTY, BIT SET FOR DRILL MACHINE

Shifting of departmental 200 mm dia (8 mm thick) MS Pipes (6.01 meter each) from Mazbugh to Model Town Sopore/ Bye Pass Sideeq Colony, including welding, transportation, and laying in trenches at WSS Sideeq Colony Model Town under Capex Budget Regula

Raising of Boundary wall and fencing, construction of Robust gate, crash barriers at Civil Secretariat, Jammu by way of providing and fixing of M.S black sheet by way of welding etc over existing mesh (View Cutter). CNO433-P (2nd Call)

Fluke clamp Meter, Fluke Multimeter, 1 Inch Pneumatic wrench, Impect screw driver Set, Torque wrench 250, Staley Spanner Set Open Right Set, Allenket Set Taparia, Welding Gloves 1 Set, Pipe wrench24 No, Pipe wrench 18 No, Welding Apran, Welding ... Clamp, Welding Holder, ...

Pop Rivit Machine, Welding Cable 50mm Copper, Hand Gloves Leather, Welding safety Goggles, Welding Goggle Normal, Hammer Drill Machine GBH 220 Elctric, Hammer drill Bit 6mm 8mm 10mm 12mm 16mm, Leveller Tool with Magnet 12 inch, Proskit tool set

Injector tester knob, Welding holder, Welding cable 35mm, Bearing remover jack, Hand cutter blade, Magnetic stick, 3 Core copper cable, Shock proof rubber mat

Front wind shield BP glass 2.5 Ton Tata, Grinding wheel 4 inch, Cutter wheel 4 inch, Welding face shield glass, Welding Rod, Insulation tape

GI pipe for pneumatic sys, Pneumatic gun hy duty, Pneumatic flexible pipe, welding cable copper, Heavy plastic pipe for fuel filtration plant, welding rod

Cutter Wheel 14 inch, Cutter Wheel 4 inch, Grinding Wheel 4 inch, Tape Insulation, Welding Rod 3.15 x 350 mm, Cast Iron Welding Rod