Fabrication Tenders in Uttarakhand

COMPLETE MACHINING, FABRICATION, STRESS RELIEVING(SR) ASSEMBLY, INDUCTION HARDENING (IH), AS APPLICABLE, AND COATING (AS APPLICABLE) OF DABG ITEM, EMPTY CASE DEFLECTOR

Vertical Frame Poles qty 23 of height 6 feet above ground level MS square pipe of 2 x 2 inch fixed vertically grouted in PCC using cement sand and aggregate in the ratio of 1 2 4 at 10 feet interval., Horizontal Frame Poles MS Square pipe of 1 inch x ... sqft, Fabrication of ...

Arrangement of Telephone facilities for Setting up extension centre of CEFC Common Engineering Facility Centre for Advanced Welding technology at HRDC, HEEP, Haridwar.

Work of Fabrication, Painting, Writing and Grouting of Various type of Notice/warning boards along Bhagirathi river from Maneri to Uttarkashi

Conceptualization, Designing, Fabrication and Dismantling of THDCIL stall at Uttar Pradesh International Trade Show, India Expo Centre and Mart, Greater Noida

Rate contract of Fabrication and Supply of components required for model testing at Hydraulic Turbine R and D Laboratory, HRED IITR

Supply, Fabrication and Fixing of Heavy Duty M.S. Gates at Dam and Power House area/site different location at KHEP, Koteshwar

DESIGN, ENGINEERING, SUPPLY, MANUFACTURE, FABRICATION, INSTALLATION, TESTING and COMMISSIONING OF VAPOUR RECOVERY SYSTEM AT IOCL HALDWANI DEPOT (UTTRAKHAND) UNDER UPSO-II

Covered Electrodes for Manual Metal Arc Welding of Stainless Steel and Other Similar High Alloy Steel (V2) conforming to IS 5206 (Q3) (3 (3 ))

Portable DC Welding Generator as per RDSO Specification no. TM/SM/20 dt: 19.11.1992 with latest amendments if any. Accepted firm offer make : HPM

Portable DC Welding Generator as per RDSO Specification no. TM/SM/20 dt: 19.11.1992 with latest amendments if any. Accepted firm offer make : hpm

Complete Machining, Machining of Sub Components, Fabrication, Coating ( As applicable) and Assembly with BHEL Material as per DRG and its Technical requirements.

Custom Bid for Services - Laying painting fabrication and erection of compressed air pipeline inside new bays of DABG expansion plan phase II

Electra KOKO-TAWA Rectifier inverter based(IGTB) double bridge type, Electra KOKO-TAWA Rectifier inverter based(IGTB) double bridge type Welding Set 240V,single Phase

Custom Bid for Services - Third party Inspection TPI agency for witnessing of WPS Welding Procedure Specification pqr Procedure Qualification record and WPQ Welder Performance Qualification

Portable DC Welding Generator as per RDSO Specification no. TM/SM/20 dt: 19.11.1992 , 2nd revision 2022, with latest amendments if any. (ACCEPTED MAKE :hpm)

Fabrication and installation of 3D working floor model of size 22x12 fit with led light for the museum at Tehri hydro Power Complex.

Fabrication, Erection,Testing and Commissioning of EOT crane capacity 03 Ton for lowering and lifting of dam pit dewatering pump at KHEP, Koteshwar

Fabrication of M.S Platform (Chemically coated) for inspection and maintenance of trunnion bracket assembly of orifice radial gates of VyasiDam at Juddo Dehradun

WORK OF STRENGTHENING OF STORE CAPACITY BY M.S. FABRICATION AND P.C.C. WORK FOR KEEPING TRANSMISSION LINE AND SUBSTATION ACCESSORIES AT 220KV SUBSTATION CHAMBA

Custom Bid for Services - Assistance in Upgradation of Steel castings ie BMG Fettling and Fabrication etc Similar Category Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

CA No CWE/HILLS/RKT/51 of 2020-21 REPAIR/MAINT TO STEEL FURNITURE ARTICLES INCLUDING CANNING/WELDING/PAINTING AT VARIOUS STATIONS UNDER GE (MES) RANIKHET

COMPLETE MACHINING, MACHINING OF SUB ASSEMBLIES, WELDING, INDUCTION HARDENING (IH) , COATING (AS APPLICABLE) , ASSEMBLY (AS APPLICABLE) WITH BHEL MATERIAL AS PER DRAWING AND ITS TECHNICAL REQUIREMENTS.

Repair and Maintenance of factory area related to various civil works like masonry, fabrication, plumbing, carpentry, sanitation, water supply, etc. in HEEP BHEL Haridwar.

Civil work for construction of foundations for Fabrication and Assembly Bays along with associated facilities etc for DABG Expansion Project Phase 2, HEEP Haridwar

Repair and Maintenance of factory area related to various civil works like masonry fabrication plumbing carpentry sanitation water supply etc. in BHEL HEEP Haridwar

REPAIR AND MAINTENANCE OF FACTORY AREA RELATED TO VARIOUS CIVIL WORKS LIKE MASONRY, FABRICATION, PLUMBING, CARPENTRY, SANITATION, WATER SUPPLY, ETC. IN HEEP BHEL HARIDWAR

Custom Bid for Services - Fabrication Erection and Painting of FES DUCT for new 30T EAF in SMS CFFP Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Fabrication of Main Gate in ACP sheet with 2 inch iron frame size 24 by 2 feet comma pillar 4 by 2 feet, Acrylic letter with backlight 14 inch Powerful Mix Regiment, Divisional and Artillery Logo with inner light, Logo Operations with inner light, Logo 136 Field Regt with inner light, Steel shining letter 14 inch Har Jawan Paltan Ki Shaan, Combat cloth for canopy and fabricated toilet, Name Plate steel with wooden base 22 by 10 inch size, Acrylic Logo Citation with inner light 24 by 15 inch size, Acrylic Logo 136 Field Regt with inner light 24 by 24 inch size

RV1015708102, RV1015908020, RV1019219211, RV1019719834, RV1019821582, RV1065964110, RV1065964119, RV1935931016

Conceptualization, designing, fabrication, erection, maintenance and dismantling of THDC India Limiteds Pavilion at Bharat Electricity Summit-2026, at India International Convention Centre, Yashobhoomi, Dwarka, Delhi

Design, Fabrication and setting up Selfie/ Photo Booth and Display of Hoardings for communication campaign in Uttarakhand state displaying various achievement of Ministry of Power

Fabrication of metal guide vanes with shaft, metal cascade enclosures, transparent guide vanes, transparent cascade section as per drawing and retrofitting in the existing setup

Portable welding Generator set (100/200A) with accessories, Engine - petrol start - petrol run, power - 13 HP, Air cooled, No. of cylinder - 1, transistorized magneto ignition with recoil/electric sta

Title1, Title2, Title3, Title4, Title5, Title6, Title7, Title8, Title9, Title10, Title11, Title12, Title13, Title14, Title15, Title16, Title17, Title18, Title19, Title20, Title21, Title22, Title23, Title24, Title25, Title26, Title27, Title28, Title29, Title30, Title31, Title32, Title33, Title34, Title35, Title36, Title37, Title38, Title39

Fabrication of tipper body with tipping system including 02 under body jack(TATA) with PTO Pump, valve hydraulic tank and complete pipeline fitted with amplifier sound system

Fabrication of RF Circuits using 65 nm TSMC MS /RF process Minimum die size 1SQ MM and Packaging Integration with standard Assembly QFN Package Minimum 10 Dies

Base plate 6 by 5 inch, Round pipe iron 1 point 5 inch, Cloth inner Blue color, Cloth outer water proof green color, Picquet Iron, Patta

PORTABLE WELDING CUM GENERATING SET ( GENERATING SET MAKE OF HONDA, MELLEGA, KIRLOSKAR, MAHINDRA, GASTECH, KOHLAR) TWO POLE FIELD ROTATING TYPE, 220-230 VOLTS SINGLE PHASE, 50HZ, CONTINUOS OUTPUT 2 KV

Portable welding Generator set (100/200A) with accessories , Engine %u2013 petrol start %u2013 petrol run, power-13 HP, Air cooled, No. of cylinder -1, transistorized magneto ignition with recoil/ele

Portable D.C Welding Generator AS PER RDSO SPECIFICATION NO TM/SM/20 DT. 19.11.92 (2ND REV.2022) Offered Make / Brand : HPM and Model GE W 8000 RS. HSN Code: 85153910

ADOR Conventional Rectifier type Welding Set 415V,three Phase with trapping to compensate for variation in input supply Brand: ADOR (Detailed Description/Specification as per Product # 1 of GeM Contra

PORTABLE WELDING CUM GENERATING SET ( GENERATING SET MAKE OF HONDA, MELLEGA, KIRLOSKAR, MAHINDRA,GASTECH, KOHLAR) TWO POLE FIELD ROTATING TYPE, 220-230 VOLTS, SINGLE PHASE, 50 HZ, CONTINUOUS OUTPUT 2

ADOR Rectifier inverter based(IGTB) double bridge type Welding Set 415V,three Phase with trapping to compensate for variation in input supply Brand: ADOR (Detailed Description/Specification as per Pro

Portable welding Generator set Engine - petrol start - petrol run, as per the attached specification MAKE/BRAND : HPM Remarks : Firm must approve one sample from the consignee before sending the bulk

Printed Register, Welding Machine, Welding Rod, Hitson Umbrella Large Size, Insect Killer Racket

Fabrication and Erection of Walkways Foot Bridges and ladders etc. for the Inspection of Piers Divide walls and Spillway Glacis at Judddo Dam of Vyasi HEP Distt. Dehradun

Making arrangement for Republic Day Celebration 2023 (SH: Fabrication of MS Pedastal, railing etc along with repairing of old pedastal, railing etc for temporary bridge over water channels)

Custom Bid for Services - Work of Shearing Punching Deburring Degreasing Varnishing Orientation stacking Devarnishing Derusting spot welding spatter cleaning Painting Loading Unloading scrap collection and transportation disposal work and other mis..

ADOR Rectifier inverter based(IGTB) double bridge type Welding Set 240V,single Phase Brand: ADOR (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687769055951 dt.04/0