Loading
Loading…
Loading…
2,416 results • Best match
PROVISION OF SECURITY WALL AND WATCH TOWER IN NEWLY ACQUIRED LAND TO ENCLOSE AREAS AT NMRL AMBERNATH
EXTERNAL ELECTRIFICATION Supply, laying & testing, cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35sqmm 4core complete all as specified and directed.
Drilling of 175 mm dia and 150 meter deep with installation submercible motor pump set including Elctrification work Complete at different Location in ward No. 42 (Maulik Nidhi) file No. 23/26X9/1. 3rd Call
Providing & laying of three phase single core P.V.C. cable of 10 sq.mm size made of allumium wires for supply of power from electric pole/transformer upto panel board for operating sub-mersible motor pump complete and supply of 6 meter medium class 32 mm dia G.I. pipe for laying of cable and grouting of 32 mm dia G.I. pipe 50 cm below ground level in cement concrete (1:1:5:3) with all material & labour charges complete.
1)Proposed interlocking of LC 155 at km. 901/6-7 between Bolda - Sirli station in PAU-AK section in Nanded Division- Electrical Arrangements. 2)Proposed interlocking of LC No. 33 between ADB-PMKT and LC 74 between BDU-Jalna stations over Nanded Division- Electrical Arrangements.
Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of 17 cable trench 30 cm wide x 90cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer.
Construction of water fountain with necessary MEP works at CURAJ
Supplying & laying of Electric Cable for LED Light 4*1.5 Sq.mm pvc sheathed, flexible, stranded copper conductor cable with pvc conduit of medium strength.
Upgradation of street lights Providing and fixing of high mast lights at Industrial Area Kaladera Jaipur Rs. 198.24 Lakhs
Add Extra in item no. 11.1 to 11.4 for Laying Charges for cable through Vermeer machine by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required.
REPAIR/MAINT OF LT ELECTRIC SUPPLY AND DISTRIBUTION NETWORK INCLUDING REPLACEMENT OF U/S CABLE JOINT KIT, BUS BAR JUNCTION BOX,CHANGE OVER SWITCH AND CONNECTED ITEMS OF ELECTRIC SUPPLY AT DIBRUGARH,GANESHBARI,CHABUA, FSD PANITOLA AND LAIPULI AREA
M & L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.
