Railway Works & Supplies Tenders

IR for Providing,Laying/Pushing , joining of M.S. Metre casing pipe below railway track at required depth in formation by Trenchless method of 400 mm internal dia as per approved plan with protection against corrosion by providing polythene tape on outer suface of pipe and anticorrosive bituminous paint of 250 micron on inner surface of pipe as per RDSO specification as per approved plan. Rate includes all materials (except pipe), Labours , machinery, cutting plates/blades. wooden block, jacks, T&P, dewatering of water till completion of work, refilling earth properly, disposing off surplus earth as directed by site incharge, Loading, unloading, leading, lifting, handling, rehandling, all taxes. charges etc.The work will be done without the disruption of traffic incl. welding and testing of pipe string before laying position, lighting arragement during night hours, excavation, temp. arrangement i.e. pit, thurst bed & wall with his own material including cement & steel etc., as per specification on approved plan..Nothing shall be paid extra except the accepted rate whtasoever the case (Payment of this item will be made only after satisfactory Laying/Pushing of pipe in position and no advanced payment for supply of pipe at site shall be given.)"

5000.00 PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in-charge. Unloading of ballast from Railway's Hopper Wagons, quantity distribution as per pre- defined site requirement, clearing infringements/jammed ballast, distributing the unloaded ballast uniformly over the track, profiling and boxing following all prescribed safety norms.

Transportation of Railway Material Copper wire MT-Km drums ,insulators, other OHE and TSS equipment / materials , steel structures, fabricated structure s1.5 M to 13 M long with cross section up to 600 mm X 600 mm and small parts steel items from any depot / project / division of Indian Railways / RE/Zones to any other depot / project /division of Indian Railways/RE/Zones to any other depot/project/division of Indian railways/RE/Zones. For Distance upto 100 KM