modular electrical enclosure switch board boxes for modular type accessories Modular Electrical Enclosure Switch Board Boxes For Modular Type Accessories ( 325 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Switch board boxes for installation of Modular Type of electrical accessories With Frame Plate With Frame Plate, Without Frame Plate Materiel of switch board boxes Dough Moulding Compound (DMC) Galvanised Iron Sheet, Dough Moulding Compound (DMC) Number of modules which can be accomodated and configuration defined as below ( Ax B x C) One Module (1 x 1 x 1 M) One Module (1 x 1 x 1 M), Two Module (1 x 1 x 2 M), Three Module (1 x 1 x 3 M), Four Module (1 x 2 x 2 M), Six Module (1 x 3 x 2 M), Eight Module (1 x 4 x 2 M), Eight Module (2 x 4 x 2 M), Twelve Module (2 x 6 x 2 M), Eighteen Module (3 x 9 x 2 M) Minimum size of the box ( L mm x W mm x W mm) 75 mm x 75 mm x 50 mm 75 mm x 75 mm x 50 mm, 100 mm x 75 mm x 50 mm, 135 mm x 75 mm x 50 mm, 210 mm x 75 mm x 50 mm 1/4, 230 mm x 80 mm x 50 mm, 135 mm x 135 mm x 50 mm, 210 mm x 135 mm x 50 mm, 210 mm x 210 mm x 50 mm Matching Cover Plate With With, Without Matching Frame Plate With With, Without CONSTRUCTIONAL Switch Board Box frame plate and cover plate shall be of configuration A X B X C where A-Number of rows B-Number of opening C-size of opening that is 1M or 2M (1M is the normal width of the switch ) (2M is the normal width of 3 pin socket as seen from the front) Yes - Thickness of Material (mm) 2.5 mm or higher for DOUGH MOULDING COMPOUND (DMC) - Type of installtion Indoor - Provision of earthing Yes - Holes with knook out for the entry of cable on all sides Yes - Switch board boxes shall have proper threading for fixing the frame plate and shall be supported with fixing screws made of NiCr plated brass or stainless steel Yes - Materail of the Cover Plate Polycarbonate Electrical Grade - Colour: Matching with the accessories Off-White - Mirror Finish surface of the cover plate Yes - Cover plate Shall be clip on Type Yes - Cover Plate shall be Snap fit which shall withstand at least 5 Yes - 2/4 operations of fixing and removing causing no damage to the component nor they shall fall loose Interchangeability of the cover plate Yes - All the switch board boxes, Frame Plate and Cover Plate shall be indelibly marked with manufacturers name trade mark Yes - Colour of frame plate Available - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxmikant Khalikar 431401, Station Road Near District Court 325 15
Loading…