RUCHITA INTERNATIONAL

LED Lamps- bulb LED Lamps- Bulb ( 4000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 9Watt/900 lumens 9Watt/900 lumens Colour Temperature (K) 6500 6500 Type of Lamp CAP B22d B22d Warranty for free replacement (Years) 2 Years 2 Years Conformity to Indian Standard IS:16102 part I and Part II latest - FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 - LED Chip Efficacy (Lm/W) >/=130 - Colour Rendering Index(CRI) >/=80 - Beam Angle (Degree) >/=120 - Power Factor >/=0.9 - Total Harmonics (%) </=15 - Driver Efficiency (%) >/=85 - LED chip Wattage (Watt) </=1 - Surge Voltage 2.5 - 1/4 withstand (KV) Operating Voltage range (Volts) <100 Volt and >300 Volt - Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt - Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 - CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LED CHIP - LED Make PHILIPS - Light Source (as per LM80/IS16106) SMD LED Chip - Lamp Shell material Polycarbonate - Ingress Protection in IP >/=20 - TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes - LED life test Certificate No. ELD2920142016 - LED life Certificate Test Report Date 29/10/2016 - LED lamp life certificate for 6000 hrs Yes - LED Lamp certificate Number R - 87000019 - LED Lamp Life Certificate date 23/06/2017 - Name of Lab where test conducted ALPHA TEST HOUSE PHILIPS IN HOUS TESTING (PHILIPS NABL LAB) - EMC Test Yes - Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes - Test certificate No. R - 87000019 - Test Report Date 23/06/2017 - Name of lab where test conducted Bureau of Indian Standards - Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes - * Bold specifications are the golden parameters. 2/4 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arpit Chugh 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 4000 15

LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 36W, 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 1/7 Warranty for free replacement (in years) 2 2 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or Yes - 2/7 better Operating temperature range -10 deg C to +50 deg C -10 deg C to +50 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes - 3/7 between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot Yes - 4/7 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes - 5/7 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 KRITIKA CHOUDHARY 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 200 15 EMD Required No ePBG Required No