SAM INFOWAYS INDIA PRIVATE LIMITED

Digital Storage Oscilloscope Digital Storage Oscilloscope ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values PERFORMANCE FEATURES Bandwidth 200 200.0 Bandwidth Upgradability no yes, no Operating System Non -Windows Windows, Non -Windows, NA INPUT CHANNELS Type of input channels Analog Analog Number of Analog Channels 4 4 Record Length Per Analog Channel Simultaneously 1M points 2500 points, 10000 points, 1M points, 4M points, 10M points, 100K points, 20M points, 5oM points, 2M points Sampling Rate Per Analog Channel Simultaneously 1 GS/sec 1 GS/sec Digital Channels no yes, no Number of Digital Channels NA 8, 16, NA Record Length Per Digital Channel NA 100K point, 500K point, 1M point, 2M point, 1/5 Simultaneously 4M point, 8M point, 16M point, 32M point, 64M point, NA Sampling Rate Per Digital Channel Simultaneously NA 500MS/sec, 1GS/sec, 2GS/sec, NA DISPLAY Display Type colour TFT colour TFT Minimum Display Size 8.5 As per GeM Catalogue. MEASUREMENTS FEATURES Vertical Sensitivity 1mV/Div to 5 V/Div - Vertical Resolution 8 - Frequency Analysis Feature no - In-built Frequency Counter yes - In-built Function Generator no - Time Base Range 2 ns/div to 50 s/div - Time Base Accuracy 25 As per GeM Catalogue. GENERIC Minimum Detectable Pulse Width 5 - Memory Upgradability no - Segmented Memory Feature Availability yes - Waveform Update Rate (Waveform/sec) 100000 - Coupling AC, DC, GND - Trigger Types Edge, pulse width, video, External, runt, pattern, b urst - Measurements Math function-Add, subtract, multiply, divide, Automatic Measurements of Amplitude and time, FFT (phase), low-pass filter, Time & Voltage cursors, FFT (magnitude) - Acquisition Modes Normal, Peak Detect, Averaging, High Resolution - I/O Interface USB - Power Source 230 V AC - Any other features, if applicable  Industry fastest Update Rate 200, 000 - 2/5 wfrm/s in the class.  Integrated 3 – digit Digital Voltmeter and 5 – digit Frequency counter  Built-in training signals, that enable users to quickly learn to capture and analyze simple (e.g. sine wave) or complex (e.g. radar pulse) signals with controlled real-time signal generation and It includes dynamic teaching labs contains an array of built-in training signals.  2-year recommended calibration interval  Future Upgradable Option Available: * 8-Channel Mixed Signal Oscilloscope (optional), * Serial protocol analyzer (optional), * 20 MHz function generator with Sine, square, ramp, pulse, noise and AM, FM and FSK Modulation capability * Upgradable measurement applications i.e. Computer serial triggering and analysis (RS232/422/485/UART), Automotive serial triggering and analysis (CAN, LIN), Embedded serial triggering and analysis (I2C, SPI), Mask Testing, Segmented Memory ACCESSORIES Standard Accessories to be supplied Four nos. of 300MHz passive probe, 10:1, Power Chord, Certificate of Calibration, Documentation CD - OPERATING CONDITION Minimum Operating Temperature 0 - Maximum Operating Temperature 55 - Operating Humidity 80 - 3/5 (RH) SERVICE Warranty 5 1, 2, 3, 4, 5 Higher is better TEST REPORT DETAILS & TESTS conformity to Dry Heat for 16 hrs at specified maximum temp, in accordance with IS:900 0/part-3/section-5/1977 latest yes - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 latest yes - conformity to Cold Test for 4 hrs at specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest yes - Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification yes yes, NO Test Report Number and date for specification(not a part of biddable parameter) - - Name and Address of the Test lab(not a part of biddable parameter) - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jiffy Jose 682021, NPOL, Thrikkakara 5 30

signal generator Signal Generator ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL FEATURES Type RF Signal Generator RF Signal Generator, RF Vector Signal Generator MEASUREMENT FEATURES Frequency Resolution (Hz) 0.1 - Frequency Range(Hz) 10 MHz to 20 GHz 10 MHz to 20 GHz Temperature stability for reference frequency (PPM) 0.0045 - SSB Phase Noise declared at 1GHz, on 20KHz offset - SSB Phase Noise at declared values (dBc) -134 - Maximum Output Level (dBm) 13 5, 13 Minimum Output Level (dBm) -120 -105, 110, 120 Ageing Rate for reference frequency (PPM/Year) 0.03 - Non Harmonics declared at >10 KHz carrier offset >10 KHz carrier offset, >50KHz carrier offset 1/6 Non Harmonics at declared values(dBc) -50 - Harmonic declared at(dBm) 20GHz At Level 0 DBm - Output Level Resolution (dB) 0, 1 - Harmonics at declared values(dBc) -45 - Reverse Power Protection(watt) 2 2, 50 Accuracy declared at(dB) Levels > -100dB - Accuracy at declared values(dB) -1 - VSWR on all operating frequencies 1.6 AM FEATURES Amplitude Modulation (AM)Operating Modes Internal - Maximum Amplitude Modulation Frequency (3 dB), f > 100KHz 100 20, 80, 100 Minimum Amplitude Modulation Frequency (3 dB), f > 100 KHz 10 10, 20 Amplitude modulation depth(%) 0-100 0-90, 0-100 Resolution of AM 0.1 0.1, 1 AM Distortion at 1 KHz 2 FM FEATURES Frequency Modulation(FM) Operating Modes Internal - Maximum Frequency Modulation Frequency(-3 dB)Standard 100 20, 100 Minimum Frequency Modulation Frequency (-3 dB) Standard 10 10, 20 Minimum Frequency Deviation 0 0, 20 Maximum Frequency Deviation (KHz) 1000 20, 100, 1000 2/6 Resolution of FM 1 - Setting Error (at AF=1 KHz and 50% maximum deviation) for FM(%) 1 - PHASE MODULATION FEATURES Phase Modulation Available Available, Not- Available If Available, Phase Modulation Operating Mode Internal - Minimum Phase Deviation (Radians) 0 - Maximum Phase Deviation (Radians) 10 - Resolution of Phase Modulation(%) 1 - Setting Error (at AF=1 KHz) for Phase Modulation(%) <5 - PULSE MODULATION FEATURES Input Level TTL - Pulse Modulation Available Available, Not- Available Rise and Fall Time <3 micro sec - On/Off Ratio (dB) > 80 - Minimum Pulse width(nano sec) 150 - OTHER FEATURES Memory(Minimum Storage Settings) 14 Internal Modulation Generator For AM/FM/PM[Minimum frequency](Hz) 20 - Internal Modulation Generator For AM/FM/PM[Maximum fequency ](KHz) 1000 - Resolution of Internal Modulation Generator For AM/FM/PM 0.1 - Digital sweep RF, LF in continuous sweep, single sweep and single step, Automatic single manual, Externally triggered, AF in automatic, Single shot, Lograthmic modes - 3/6 RF Digital Sweep Range and Width freely selectable - RF Digital Sweep Time Range 30ms - 1s - RF Analog sweep Available Available, Not- Available RF Analog Sweep Time Range 30ms-90s - If Available, RF analog sweep range and width Freely selectable - other features - - VECTOR MODULATION FEATURES Vector Modulation Not-Available Available, Not- Available Internal Base Band Generator Bandwidth (MHz) NA - Arbitory waveform memory (Mega samples) NA - Modulation NA - Error Vector Magnitude(EVM) 0 - POWER SOURCE Power Requirements 230 V +/-10% AC, 50 Hz +/- 3% - GENERIC Interface Available IEEE-488, LAN - Details of Standard Acessories (To be supplied with the equipment ) "Standard output power Standard spectral purity CW signal generation Amplitude range of +15 to -20 dBm 3.5 mm (f) to 3.5 mm (f) connector adapter (20 GHz model only) Country-specific power cord Documentation set (CD-ROM)" - OPERATING CONDITION Minimum Operating Temperature (Degree C) 0 - Maximum Operating Temperature(Degree C) 50 - Operating Humidity(RH) at 45 degree C non condensing 95 - SERVICE Warranty 3 1, 2, 3, 4, 5 4/6 TEST REPORT DETAILS The equipment supplied with calibration certificate YES - conformity to Dry Heat for 16 hours at a maximum temperature in accordance with IS:9 000/part-3/section-5/19 77 latest YES - conformity to Cold Test for 4 hours at a minimum temperature in accordance with IS:9 000/part-2/section-4/19 77 latest YES - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temperature of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 latest YES - Availability of the test report from Central Government/NABL ILAC acredited lab to prove confirmity to the specification YES - Test Report Number and Date for the specification test(not a part of biddable parameter) - - Name and address of the Lab for the specification test (not a part of biddable parameter) - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pappala Kasi Visweswara Rao 500005, Defence Electronics Research Laboratory, Ministry of Defence, Chandrayanagutta Lines, Hyderabad 1 60