FURNITURE WALLA

plastic moulded chair Plastic Moulded Chair ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest true - Plastic Material POLYPROPELENE FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms 1/4 DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 570 345, 365, 385, 400, 415, 4 25, 455, 475, 500, 510, 52 0, 530, 540, 550, 560, 570 Seat Depth in mm (+/- 5 mm) 560 340, 360, 380, 410, 4 20, 430, 440, 450, 460, 47 0, 480, 490, 520, 560 Chair Height in mm (+/- 10 mm) 790 500, 750, 770, 7 90, 805, 825, 840, 850, 87 0, 890 Chair Dimensions Conforming To IS 3663 (Latest) - Weight of Chair (IN Grams) 500 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Stove enameled Paint Stove enameled Paint, Powder 2/4 coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Colour Brown, RED - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Praveen Kumar Chandrakant Ghag 600065, Principal, RTC, CRPF, Avadi, Tamil Nadu, Tiruvallur, Pin- 60065. 500 15 EMD Required No ePBG Required No