ANKIT INTERIO

plastic moulded chair Plastic Moulded Chair ( 230 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material PVC (Polyvinyl Chloride) FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, 1/4 POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 570 * Seat Depth in mm (+/- 5 mm) 560 * Chair Height in mm (+/- 10 mm) 890 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 3500 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 more than 50 % Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Dark Brown * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 230 15

plastic moulded chair Plastic Moulded Chair ( 190 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material FILLED THERMOPLASTIC FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, 1/3 POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS Without arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 345 * Seat Depth in mm (+/- 5 mm) 340 * Chair Height in mm (+/- 10 mm) 500 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 40 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM 40 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) 40 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test * Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle 2/3 Moulded Piece No Support Structure Support Structure Finishing Powder coated Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Colour Brown, Blue, RED, Black * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 190 15