Harshvandana enterprises

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint MSME Exemption For Years Of Experience And Turnover Yes Enamel, Exterior: (a) Under Coating (b) Finishing Paint ( 124 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values ITEM Item Enamel, Exterior: (a) undercoating (b) Finishing Paint Enamel, Exterior: (a) undercoating (b) Finishing Paint Uses For exterior Finishing For exterior undercoating, For exterior Finishing SPECIFICATION Conformity to Specification IS 2932 latest IS 2932 latest Product is BIS marked false true, false REQUIREMENT of SYNTHETIC ENAMEL PAINT Class Brushing * Surface Dry time 4 hour for (Finishing) * Hard Dry Time 12 hour for (Finishing) * Gloss 60 Degree Above 71 for (Finishing) * Mass, kg/10 litre, minimum 9.0 for (Finishing) * 1/3 Wet Opecity Requirement, minimum 60 * Fineness of grind not more than 15 microns for (Finishing) * Volume solid percent, minimum 35 (Finishing) * COLOUR Colour shade of enamel Paint with ISC no signal red(537) signal red(537) FINISH Finish smooth and glossy for (Finishing) smooth and Matt to egg shell gloss for (undercoating), smooth and glossy for (Finishing) Self Life Keeping Properties 1 * Packing Packing Size 1 Litre, 0.1 Litre, 0.2 Litre, 0.5 Litre, 1 Litre, 4 Litre, 5 Litre, 10 Litre, 20 Litre, 25 Litre ADVANCE SAMPLE Agree to provided advance sample(s) for buyer's approval before commencement of bulk supply (Hint: Application in case of orders placed against bid and not applicable in case of Direct Buying) Yes Yes TEST REPORT Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification - * Test report no - * Test report date - * Name of the Lab - * Address of the Lab - * Test Report to be furnished to the buyer on demand - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Prayas Pandey 414002, HQ SOTT, ACC & S, AHMEDNAGAR CANTT 124 15

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 3 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without * Light Source SMD LED Chip * LED Make bajaj * Length of tube light (Nominal) (in mm) 1220 * 1/4 FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date - * 2/4 Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report - * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pradip Mukherjee 560006, HQ Training Command Air Force JC Nagar Post, Bellary Road Bangalore 100 15