JK FILES & ENGINEERING LIMITED

TAP M3X0.5 TAPER HSS-E, TAP M3X0.5 SECOND HSS-E, TAP M3X0.5 BOTTOM HSS-E, TAP M8X1.25 TAPER HSS-E, TAP M8X1.25 SECOND HSS-E, TAP M8X1.25 BOTTOM HSS-E, TAP M10X1.5 TAPER HSS-E, TAP M10X1.5 SECOND HSS-E, TAP M10X1.5 BOTTOM HSS-E, TAP M12X1.75 TAPER HSS-E, TAP M12X1.75 SECOND HSS-E, TAP M14X2 TAPER HSS-E, TAP M14X2 SECOND HSS-E, TAP M14X2 BOTTOM HSS-E, TAP M20X2.5 BOTTOM HSS-E, TAP M24X2 TAPER HSS-E, TAP M24X1.5 TAPER HSS-E, TAP M24X1.5 BOTTOM HSS-E, TAP M27X3 TAPER HSS-E, TAP M27X3 SECOND HSS-E, TAP M27X3 BOTTOM HSS-E, TAP M30X2 BOTTOM HSS-E, TAP M32X2 BOTTOM HSS-E, P S DRILL 2.20 MM HSS-E, P S DRILL 4.0 MM HSS-E, TAPER SHANK DRILL 3.0 MM HSS-E, TAPER SHANK DRILL 4.5 MM HSS-E, TAPER SHANK DRILL 6.8 MM HSS-E, TAPER SHANK DRILL 8.5 MM HSS-E, TAPER SHANK DRILL 10.5 MM HSS-E, TAPER SHANK DRILL 12.0 MM HSS-E, TAPER SHANK DRILL 12.2 MM HSS-E, TAPER SHANK DRILL 14.0 MM HSSE, TAPER SHANK DRILL 17.75MM, TAPER SHANK DRILL 17.80MM HSS-E, TAPER SHANK DRILL 18.0 MM HSS-E, TAPER SHANK DRILL 20.25 MM HSS-E, TAPER SHANK DRILL 22.5 MM HSS-E, TAPER SHANK DRILL 23.50 MM HSS-E, TAPER SHANK DRILL 26.50 MM HSS-E, TAPER SHANK DRILL 59.00 MM HSS-E, TAPER SHANK DRILL 66.00 MM HSS-E, TAPER SHANK FLAT TWIST DRILL 6.80 MM HSS-E, TAPER SHANK FLAT TWIST DRILL 8.50 MM HSS-E, TAPER SHANK FLAT TWIST DRILL 10.50 MM HSS-E, TAPER SHANK FLAT TWIST DRILL 14.00 MM HSS-E, TAPER SHANK FLAT TWIST DRILL 17.80 MM HSS-E, CENTRE DRILL 6.3X16 MM HSS-E, CENTRE DRILL DRIVER 10X25 MT-5, CENTRE DRILL DRIVER 4.0X10 MT-2, CENTRE DRILL DRIVER 6.3X16 MT-3 Bid Number : GEM/2025/B/6299963 Dated : 17-06-2025 Bid Document 1/53 HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M3X0.5 MM PITCH, TAPER. SHANK DIA 2.24 MM. SHANK SQUARE 1.80 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992, HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M3X0.5 MM PITCH, SECOND. SHANK DIA 2.24 MM. SHANK SQUARE 1.80 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992, HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M3X0.5 MM PITCH, BOTTOM. SHANK DIA 2.24 MM. SHANK SQUARE 1.80 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)- 1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M8X1.25 MM PITCH, TAPER. SHANK DIA: 6.30 MM. SHANK SQUARE 5.00 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M8X1.25 MM PITCH, SECOND. SHANK DIA: 6.30 MM. SHANK SQUARE 5.00 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M8X1.25 MM PITCH, BOTTOM. SHANK DIA: 6.30 MM. SHANK SQUARE 5.00 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M10X1.50 MM PITCH, TAPER. SHANK DIA: 8.00 MM. SHANK SQUARE: 6.30 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)- 1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M10X1.50 MM PITCH, SECOND. SHANK DIA: 8.00 MM. SHANK SQUARE: 6.30 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M10X1.50 MM PITCH, BOTTOM. SHANK DIA: 8.00 MM. SHANK SQUARE: 6.30 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 HRC APPROX. STRAIGHT FLUTED, COARSE PITCH, GROUND THREAD FOR RIGHT HAND CUTTING MADE OF HSS-E DIMENSIONS, TOLERANCES & OTHER TO CONFORM TO IS :6175 (Part-3)-1992., HAND & SHORT MACHINE SCREWING TAP, NOMINAL SIZE M12X1.75 MM PITCH, TAPER. SHANK DIA 9.00 MM. SHANK SQUARE 7.10 MM. NO OF FLUTES 3. CUTTING PORTION HARDNESS 62-67 Bid Details 2/53

Half round busturd file 4 inch, 4 inch Flat File 2nd Cut Bustard, 4 inch Round File 2nd Cut Bustard, 4 inch Jewellary Half Round File, 4 inch Jewellary Round File, 4 inch Jewellary Flat File, 4 inch Jewellary Traingular File, 6 inch Round File 2nd Cut Bustard, 6 inch Round File 2nd Cut Smooth, 6 inch Flat File 2nd Cut Bustard, 6 inch Flat File 2nd Cut Smooth, 6 inch Three Square Bastard File, 6 inch wire file Half Round, 6 inch wire file Triangular, Triangular file both side sharp and pointed, Pin Vice, Pin Ton, 8 inch Half Round Wire File, 8 inch Triangular Wire File, Std. Size Shoe Brush with Special Bristl, Piercing Saw 2 by 0, Piercing Saw 3 by 0, Jewellery Piercing saw 6 by 0, Tap and Die 3 BA, Tap and Die 5 BA, Tap and Die 6 BA, Tap and Die 8 BA, Tap and Die Set 3 by 16 inch, Tap and Die Set 3 by 8 inch, TAP and DIE SET 7 BA, Wire Drawing Diamond Die 0.035 inch 0.90mm, Wire Drawing Diamond Die 0.042 inch 1.06mm, Wire Drawing Diamond Die 0.056 inch 1.42mm, Wire Drawing Diamond Die 0.062 inch 1.57mm, Wire Drawing Diamond Die 0.070 inch 1.77mm, Wire Drawing Diamond Die 1.025 inch 3.17mm, Wire Drawing Diamond Die 0.040 inch 1.01mm, Wire Drawing Diamond Die 0.046 inch 1.17mm, Drill Quick Spiral 0.75mm, Drill Quick Spiral 0.90mm, Drill Quick Spiral 1.01mm 0.040 inch, Drill Quick spiral 1.07mm, Drill Quick Spiral 1.39mm 0.055 inch, Drill Quick spiral 1.45mm, Drill Quick Spiral 1.57mm 0.062 inch, Drill Quick spiral 1.65mm, Drill Quick Spiral 1.70mm 0.067 inch, Drill Quick Spiral 2.03mm 0.080 inch, Drill Quick Spiral 2.16mm 0.085 inch, Drill Quick Spiral 2.28mm 0.090 inch Bid Number ( ) : GEM/2025/B/5790338 Dated : 11-01-2025 Bid Document 1/45