PLASTIC SHILP UDYOG

CRTM55 Intermediate chuck jaw with groove dia 42 mm Drawing Version-4, CRTM55 Intermediate chuck jaw with groove dia 48.2 mm Drawing Version-5, CRTM55 Intermediate chuck jaw with groove dia 63 mm Drawing Version-8, CRTM55 Pilger-mill outlet chuck jaw with groove dia 26.6 mm Drawing Version-3, CRTM55 Pilger-mill outlet chuck jaw with groove dia 33.4 mm Drawing Version-5, CRTM55 Pilger-mill outlet chuck jaw with groove dia 42 mm Drawing Version-6, CRTM55 Pilger-mill outlet chuck jaw with groove dia 48.2 mm Drawing Version-7

BRASS ROUND HAL STD:1301, IS 319, TYPE-1 1/2HARD, DIA 4MM X 2 TO 3 METERS LENGTH, HALF FINISHED BRASS MATERIAL TUBE 4 X 0.5 OF 1000MM HAL STD 1307/IS407-81 GRAD, COLD ROLLED BRASS SHEET, STRIP& FOIL TH: COND:HALF HARDCUZN37, IS 410/C27200, ASTM, RIVETTING QUALITY BRASS WIRE CONF.HAL STD:1303, IS:4413-CUZN-37 ANNEALED CONDITI, BARE COPPER WIRE, CONDITION : ANNEALED, CONFORMING TO HAL STD: 6054 GRADE B/I, ALLUMINIUM ALLOY SHEET, HAL STD:1252-1/2H, CONFIRMING TO IS: GR:31000(NS3) IS:73, GLASS EPOXY LAMINATED SHEET, CONFORMING TO HAL STD: 1807, NEMALI -1- 98, GR: FR, COPPER CLADED GLASS EPOXY LAMINATES CONF. TO IPC-4101 B/26 WITH TG >= 170 DEGRE, GLASS EPOXY LAMINATE SHEET CONFORMING TO HAL STD: 1807; BS:3953-1990; GRADE: EP, PURE SILVER WIRE 99.9% (MINIMUM +0.01-0.04), CONFORMING TO HAL STD:1356; SIZE, GLASS FILLED PHENOLIC MOULDING POWDER AS PER AMITY 16/AMITY 157/HAL STD:1757, BIMETAL CLAD STRIP-GRADE 223-80 CONFIRMING TO ASTM- B-388: SIZE:0.4 X 25MM, HES