electrocardiography ekg/ecg units Electrocardiography Ekg/ecg Units ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values FEATURES Mobility, portability Protective splashproof case for clean storage and safe transport - Heart rate measurement range to be at least 30 to 250 bpm, with accuracy better than ± 5 bpm yes - Heart rate trend display of at least previous 24 hours yes - In built Software and/or standard of communication yes - Heat Dissipiation: Should maitain nominal Temp and the heat should be disbursed through a exhaust cooling fan yes - User interface manual - Noise Lavel (dba) - - Electrical protection provided by fuses in both live and neutral yes - 1/4 supply lines Operating condition: Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances yes - Arrhythmia detection facility required; minimum gradation of 1 bpm yes - Functional requirements: electricity;AC-powered; bedside device designed to continuously detect, measure, and display a patient’s electrocardiogram through leads and sensors attached to the patient, it also typically display heart rate, the device is typically equipped with audible and/or visual alarms that are triggered when the patien's parameters drop below or exceed pre-set limits: Continuous display of patient ECG and heart rate on screen, Allows display of single, 5 lead ECG or simultaneous display of at least 5 waves selected from up to 12 points Operator can set audiovisual alarm levels for low or high heart rate Operates from mains voltage or from internal rechargeable battery yes - Power consumption - - weight - - Power cable length (meter) 3 METER OR MORE - Display must allow easy viewing in all yes - 2/4 ambient light levels Audiovisual alarms required: high and low heart rate; operator variable settings, cardiac arrhythmia, sensor/wire disconnected, low battery yes - STANDARDS AND SAFETY, CERTIFICATIONS Certification(s) CE Approved product - MISCLANEOUS Warranty (years) 3 3, 5 power input and frequency 220 To 240V, 50 Hz AC - Certificate of Calibration and Inspection to be provided YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pramod Kumar 800001, ESIC REGIONAL OFFICE PANCHDEEP BHAVAN J L NEHRU MARG 2 15 EMD Required No ePBG Required No
Loading
Loading…