ECOFIT FOOTWEAR

tactical boot pu sole Average Turn Over of Last 3 Years 37 Lakh (s) Experience with Gov. Required 1 Year (s) Tactical Boot Pu Sole ( 7715 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Technical Requirements of the product Conforming to Footwear Design and Development Institute, A 10, Sector 24, Noida, specification number FDDI/TA/19 forwarded by DG CRPF vide letter No- U.II-98(Spec)/2012- 13-Prov (Tactical boot) dated 15-10-2015. - Specification and Drawing seen and understood Yes - SIZE Size as per relevant specification Assorted Sizes ( 5, 6, 7, 8, 9, 10, 11 and 12 ) as per buyers requirements - COLOUR Colour Black - TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the true - 1/4 specification. Test Report No. ART-50-03/2018 - Test Report Date 30/03/2018 - Name of the Lab AROMA LABORATORIES INDIA PVT LTD. - Address of The Lab 20A, CHANNAMAL PARK, PUNJABI BAGH (EAST) NEW DELHI - Test reports to be furnished to buyer on demand, if claimed to be available YES - ADVANCE SAMPLE * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pawan Kumar 110047, O/O The Commandant, 25th Bn SSB Delhi, Ghitorni 2031 90 2 Vikas Kumar Singh 494665, O/o the Commandant 28th Bn. SSB Kuhche Antagarh Chhattisgarh 944 90 3 Arun Sharma 190011, 13th Bn. SSB Soura Srinagar J&K 1478 90 4 Abhishek Sharma 193121, 2nd Bn SSB Pattan, Baramulla, Near SDPO Office, Pattan, PO - Pattan 1548 90 5 GANGA SINGH UDAWAT 190005, O/O The DIG, SHQ (Spl. OPS), SSB Srinagar 180 90 6 RAJ RANJAN 182143, 7th Bn SSB Batote 1322 90 7 SANJAY DYANDEO 190010, 10th Bn SSB Srinagar(J&K) 212 90 2/4

boot ankle textile jungle boot direct moulded pu sole in pairs Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) Boot Ankle Textile Jungle Boot Direct Moulded Pu Sole In Pairs ( 3184 ) Technical Specifications Specification Specification Name Values Allowed Values specification Governing Specification Conforming to FDDI (FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE, A - 10/A, Sector-24, NOIDA) Specification No. FDDI/SPEC/Jungle Boot/08:2014 (Revised), approved by MHA vide their letter N o-U.II-98(Spec)/2012-13 -Prov-9775 dated 10/12/2014, and as per following technical requirements - SIZE Size Assorted sizes (5, 6, 7, 8, 9, 10, 11 & 12) as per buyer's requirements Assorted sizes (5, 11 & 12) as per buyer's requirements COLOUR Colour Olive Green Olive Green Colour of Sole and Toe Cap Black ( For all other Boots) - MATERIALS Upper Material Upper shell consist of - 1/5 Polyester viscose fabric, Water Repellent as an outer layer and 100 % non-woven Nylon (cambrille type) lining as an inner layer. The two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. Blend Composition of polyester viscose fabric water repellent Polyester-80% Viscose- Remainder - Binding material of Polyester blended fabric, black having blend composition of Polyester-67%, Cotton-33% & confirming to IS:15852-2009 for colour fastness to light, washing & pH value YES - Insocks Covered with cambrille type non woven material black - Thermoplastic Toe Puff and Counter Stiffner Thickness when extacted from boot shall be 1.7 mm to 1.9 mm YES - Full Chrome Leather for Toe Cap and Arch piece confirming to IS 5677-1986 for Heat resistance, Colour fastness to rubbing crocking, Solvent extractable substances, water soluble matters, Chromium contents & pH value of water soluble YES - Thickness of Full Chrome Leather for Toe Cap and Arch Piece shall be 1.2 mm to 1.8 mm YES - Length of Nylon Laces (cm) 160 - 2/5 Width of Laces (mm) 6 - Breaking Load of Laces ( 20 cm between grips ) (Test Method- IS: 1969) 750 - Mass per 10 pairs of Laces (g) 125 - Dye Fastness to Washing for Laces shall be above 4 (Test Method- IS/ISO 105-C10: 2006) (Test Condition as per table-2, Test Number- C(3)) YES - Dye Fastness to Light (Test Method- IS: 2454) for Laces shall be above 4. YES - pH Value of aqueous extract shall be 6.5 to 8.5 for Laces YES - Sewing threads Polyester Sewing thread confirming to IS 9543-1980 (Variety No- 7) - OTHER REQUIREMENTS Mass per pair for Size-8 shall be 750 to 850 gms (with increase or decrease of 50 grams for each bigger and smaller size respectively) YES - Leg height for Size-8 shall be 160 mm (with increase or decrease of 2 mm for each bigger and smaller size respectively) YES - SOLE Sole Direct Moulded Polyurethane - Minimum thickness of sole (mm) 4 - Cleat height (mm) 2.5 - Thickness of sole when measured at forepart from outside with side wall (mm) 20 - Thickness of sole when measured at waist from outside with side wall 16 - 3/5 (mm) Thickness of sole when measured at heel from outside with side wall (mm) 35 - TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. YES - Name of the Lab FDDI, Ministry of Commerce & Industry Govt. of India - Address of The Lab A-10/A, NOIDA - 201301 (UP) - Test Report No. 2K1711335 - Test Report Date 20/11/2017 - Test reports to be furnished to buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gobinda Kumar Nath 784001, O/O The Inspector General, FTR HQRS SSB Tezpur, PO. Tezpur 3184 45