Telecom Instrument Services

dot matrix printers Dot Matrix Printers ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 9 9, 24 Number of Columns (Nos.) 80 80, 136 Print Speed at Draft Mode at 10 cpi (cps) 300 Print Speed at High Speed Draft Mode at 10 cpi (cps) 400 Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 70 - Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 0 - Input Data Buffer Capacity (KB) 50 50, 100 Auto share feature No - Parallel Port Available - USB Available - Network Interface ( LAN ) Not Available - Over all dimensions 195X190X400 - 1/3 (Length x Width x Height) (mm) Weight (Kgs) 6.1 - Power Supply 230 V AC - Power consumption- max in Print Mode (watts) 49 - Power consumption- max in Standby Mode (watts) 6 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification Yes - If yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of Test lab - - If yes, Address of Test Lab - - On Site OEM Warranty (Years) 2 1, 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sonakshi Sambyal 788025, 160 Military Hosp Masimpur Silchar 4 90

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 22 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/800 - Technology MOSFET-PWM - Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 - Rated Output (Volt) Single phase sinewave 230v AC, 50Hz - Degree of protection IP-21 - Inverter Efficiency (%) >/= 70% - Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years - Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes - Inverter out put socket AC out put for printer 3 Three pin - 1/4 (not through inverter) FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - 2/4 Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date ETDC & 28MH &29 T& AMPM/S 14/12/16 - Name Of Lab ETDC DELHI, INDIA - Address of Lab ETDC NCR, DELHI, INDIA - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar Dwivedi 284003, Office of Sr.DFM/JHS, DRM Office Campus, In front of Jhansi Railway Station 22 15