Jassienterprises

almirah- Steel Almirah- Steel ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NO - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 4 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by 6 lever lock - MATERIAL Material M.S sheet conforming M.S sheet conforming 1/4 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker 0.9 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1855 Width in mm (± 7 mm) 910 910.0 Depth in mm (±5 mm) 455 455.0 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) 125 mm - Thickness of MS Sheet of Stiffner (in mm) 0.8 mm - Stiffened Pedestal 125 - 2/4 height in mm (±2 mm) Pedestal Width in mm (±2 mm) 75 - COLOUR & FINISH Finish powder coated - Colour of Paint steel gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suresh Maan 144216, Bhakra Beas Management Board, IRR WING TALWARA TOWNSHIP 2 15

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 230 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 5700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source COB LED Chip - LED Make bajaj - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - 1/4 Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date 9001-2005, 23/06/2004 - Certificare for Luminaire photometric data as per LM79 Yes - Certificate No and Date of Luminaire 143255, 2/6/2014 - 2/4 photometric data as per LM 79 report Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SANJAY RAWAT 791111, NE FTR HQ ITBP, PO KHATING HILL, ITANAGAR 230 15