Fabrication Tenders in Kerala

earthwork exacavation,Laying 32mm MS Rod ,DC arc Welding,Laying GI strip,backfilling

Fabrication and supply of Narrow based Galvanized Steel Special type towers(HT,MS),30 degree deviation with 23 mtr bottom cross arm height-4 Nos A 30 degree deviation with 41 mtr bottom cross arm height- 1 No. for 110kV DC type at Transmission Subdiv

Pre Fabrication, Erection and Hooking Up 1800 mm MS Inlet Gas Ducts Between Converter 3rd bed outlet boot to new W4 and 1800mm MS Outlet Gas Duct Between new W4 and IAT In Connection With Hook Up of New W4 in SA Plant, FACT-CD.

Automatic and Semi Automatic Welding Equipment with Self Adjusting Arcs MIG/MAG as per IS 7931 (Part 1, Part 2 and Part 3) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2026/B/7072063 Dated : 20-01-2026 Bid Document 1/7, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Fire Engine Inlet and Outlet Pipe line Supply and Fabrication Flange Welding and Fitting Work, Fire Engine Fuel line cooling water line Exhaust pipe line alteration work, RCC work core cutting and filling of GP2 Chemical, Top plastering, Removal of old fire engines and Installation of new fire engines and associated cabling works

Supply fabrication painting and erection of 2 inch Service line outside shed, Dismantling of 2 inch service line, Supply fabrication painting and erection of 3 inch Service line outside shed, Dismantling of 3 inch service line, Supply fabrication painting and erection of Halft inch Service line outside shed

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; Fabrication and Installation with associated Material; All material provided by Seller for Fabrication and Installation of NDT Bay

Supply of turned and polished ms shaft size 750 mm x 50 mm dia with two key way, Supply of turned and polished ms shaft size 800 mm x 50 mm dia with two key way, Supply of turned and polished ms shaft size 850 mm x 50 mm dia with two key way, Supply of turned and polished ms shaft size 900 mm x 50 mm dia with two key way, Supply of eccentric shaft for shaking tray, Supply of en 8 turned and polished shaft, Supply of conveyor drum assy tail end, Supply of conveyor drum assy drive end

TICKLE CONDENSER (METHANOL CHILLER) E1309/1310

Dismantling dilapidated doors/windows, Providing and fixing Aluminium Partition/door/ windows . Providing and fixing plain cement board, gypsum,PVC for false ceiling Providing and fixing extra SS tower bolts,vertical blinds,Providing uPVC doors

Development of Compact FE TLA PCB NRE, Compact FE TLA PCB, Development of circular digital output preamplifier PCB NRE, circular digital output preamplifier PCB, Development of Micro connector Charge Amplifier PCB NRE, Micro connector Charge Amplifier PCB

The work involves replacement of the existing MS gratings with new ones, MS handrails with new SS handrails and the MS supports for the gratings, embedded in concrete by chemical anchoring has been replaced with SS 316 materials.

REFER NIT

Providing and fixing aluminium partitions/ doors/ windows/accessories and false ceiling.

Dismantling dilapidated doors/windows and replacing with new, Providing and fixing Aluminium Partition/door/ window/cupboards, plain cement board, Gypsum, PVC for false ceiling, extra SS tower bolts, hinges, stoppers, Locks etc.

Dismantling dilapidated doors/ windows.Providing and fixing aluminium partition/door/windows.Providing and fixing plain cement board,gypsum,pvc for false ceiling.Providing and fixing extra SS towerbolts,fittings. Vertical blinds,providing upvc door

Refer NIT

Dismantling dilapidated doors/windows and replacing, Providing Aluminium fabricated partition/door/windows , Providing plain cement board,gypsum,PVC for false ceiling,Providing SS tower bolts,hinges,stoppers, blinds,glass door, UPVC window

HEAVY END OVERHEAD ACCUMULATOR (TANK D219)

FABRICATION AND SUPPLY OF INCONEL HAIR PIN BEND AND INCONEL L BEND

FABRICATION AND SUPPLY OF CIRCULATING FANS FOR TUNNEL DRYER (CCW AND CW)

Designing, fabrication, supply, installation, testing and commissioning of enhanced lightning protection system

Supply fabrication painting commissioning of 20nos 10 x 3 m regulator shutters

FABRICATION AND SUPPLY OF HEAD ASSEMBLY AND TUBE SHEET FOR GUARD FILTER

Design, fabrication , manufacturing, supply, erection and commissioning of LED HIGH MAST LIGHT

FABRICATION AND SUPPLY OF PROCESS VESSEL R406 A/B WITH VENTURI NOZZLE

DESIGN, FABRICATION/MANUFACTURING, SUPPLY, ERECTION AND COMMISSIONING OF LED HIGH MAST LIGHT

FABRICATION AND SUPPLY OF TOP PART AND OVERFLOW SCREEN FOR SAND MILL

FABRICATION AND SUPPLY OF CIRCULATING FANS FOR TUNNEL DRYER (CCW AND CW)

DESIGN, FABRICATION,,MANUFACTURING, SUPPLY, ERECTION AND COMMISSIONING OF LED HIGH MAST LIGHT

FABRICATION AND SUPPLY OF INCONEL HAIR PIN BEND AND INCONEL L BEND

Civil works, aluminium fabrication, ACP works, tile works, electrical, plumbing works etc

Fabrication of additional members on hand rails at the fire escape staircases.

FABRICATION AND SUPPLY OF SPARES REQUIRED FOR ERECTION OF NEW SAND MILL

Supply Fabrication and installation of 30 nos Tyre Fenders at Beypore Port

Thoomba, Mammatty, Basket plastic, Sickle, Tapping knife, Orchid cups small, Orchid cups big, Cutting wheel, Welding rod, Nylon thread, Fish net, plastic twine, Garden net, Epoxy paint, Welding glass, Thinner, GI wore, Wood charcoal

Weling Electrode 01, Welding Electrode 02, Aluminium Revit Small, Aluminium Revit Large, Cutting Wheel

Steel Bar 9510-000014, Angle Iron 9520-000001, MS Sheet 9515-000019, Welding Rod

Insulation Tape, Feviquick, Transperant Tape, Rust Remover Spray, Emery Paper, Welding Rod, Reflector Tape

Earth excavation, cutting, bending, laying and welding of MS rod, Laying GI strip etc

Target 2025-26- Fabrication of 3m Channel Cross Arms 6640 Nos, 4 Line Channel Cross Arms 43042 Nos, 2 Line Channel Cross Arms 66628 Nos, 1.8m Channel Cross Arms 3400 Nos, 2.4m Channel Cross Arms 1700 Nos, Back Clamps for LT (2/4 Line) Cross Arms 6000

FABRICATION AND SUPPLY OF 12 NOS. OF ONE METRIC TONNE, NON TIPPING TRAILERS

PROVIDING FACILITIES IN KUNNATHMOTTA SC COLONY READING ROOM - ALUMINIUM FABRICATION, TRUSS, PUFF SHEET

Design, Fabrication, Supply & Qualification of Eight Cavity fully automatic De-gating Plunger Mould

FABRICATION AND SUPPLY OF FRP SUPPORTING FRAME AND COVER FOR PRE-TREATMENT SUMP

NOTICE INVITING TENDERS FOR FABRICATION AND SUPPLY OF DISHED END FOR CHLORINATOR BOTTOM

Fabrication of 11kV v cross arm clamp for 11kv v cross arm etc

Supply fabrication erection testing and commissioning of 1600MT capacity Sulphuric Acid Storage Tank

DESIGN, FABRICATION AND SUPPLY OF 900 KVAR AUTOMATIC POWER FACTOR CORRECTION (APFC) PANEL

CONTROL PCB ED-99-13B WITH 110V OUTPUT, WELDING TRANSFORMER 42V, SAW CONTROLLER 110 PENDENT