Seven Star Enterprises

SUCTION FOOT PUMP SUCTION FOOT PUMP ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Descriptions GMDN name & code(s) Manual Emergency Suction System &CT 2180 - Definition:A portable assembly of devices primarily intended to be used by emergency medical services (EMS) to aspirate fluids, secretions, or other foreign materials from a patient's airway by means of suction It typically consists of a manually-powered (hand or foot operated) mechanism to drive the suction pump, tubing, a collection container, a vacuum gauge and control knob, and a microbial filter The pump creates a vacuum in the suction tubing, which is used for the removal of materials into the collection container This system is typically yes - 1/3 used during patient transport or for emergency situations Clinical purpose : To aspirate fluids, or other foreign materials from a patient's airway by means of suction yes - Technical characteristics (specific to this type of device) : 0-700 mm Hg ± 10 mm regulable, flutter free vacuum control knob, 90 ltrs/min, tight fitting jar cap yes - User's interface Manual - Dimensions (Height X Width X Length) Max (cm) 32 x 17 x 30 cms - Consumables reagents (open, closed system) Closed System - Training of staff (Medical, paramedical, Technician) yes - Noise (in dBA) Max (dBA) N/A Weight (Max) (kg) 2.5 - Accessories (mandatory, standard, optional);Spare parts (main ones) OPERATING MANUAL - perating condition:–Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances yes - Mobility, portability No - Warranty and certifications Warranty 3 years - Product should be FDA CE approved product, ISO 13485:2003; ISO 10079-2-1999: Medical Suction equipment - Part 1 : yes - 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bishnu Prasad Nanda 600008, OFFICE OF THE CHIEF MEDICAL SUPDT, EGMORE HEALTH UNIT, NEXT TO EGMORE METRO STATION, POONAMALLEE HIGH ROAD, EGMORE, CHENNAI 2 45

pulse oximeter units line powered Pulse Oximeter Units Line Powered ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Descriptions GMDN name and Code Pulse oximeter CT 1446 * "Pulse Oxymeter, line Powered:A mains electricity (AC- powered) photoelectric device intended for the continuous transcutaneous measurement and display of haemoglobin oxygen saturation (SpO2) The signals, typically produced by light-emitting diodes (LEDs) and a receiving detector in a probe, or directly built-in, are used to make the measurements using the principle of spectrophotometry The oximeter displays the SpO2 values and may calculate/display other parameters, e g, yes * 1/4 pulse rate, electrocardiogram (ECG) The device is typically used at the bedside " SpO2 measurement range at least 40-70 and 70 to 99 %, minimum gradation 1% yes * Power consumption 220 * power input and frequency 220 to 240V, 50 Hz * Accuracy of pulse rate better than ± 5 bpm yes * Audiovisual alarms required: high and low SpO2 and pulse rate (operator variable settings&#x29, sensor disconnected, sensor failure, low battery yes * Display type TFT Screen * Heat Dissipiation: Should maitain nominal Temp and the heat should be disbursed through a exhaust cooling fan yes * Mobility, portability Protective splashproof case for clean storage and safe transport * Operating condition:Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances yes * weight (gram) 300 1-4000 Others: List of important spare parts and accessories with their part number, Certificate of Calibration and Inspection to be provided provided as per demand * STANDARDS AND SAFETY:Should be FDA yes * 2/4 CE approved product ISO 80601-2-61-2011: Medical Electrical equipment- part 2-61: Particular requirements for the basic safety snd essential performance of pulse oxymeter Electrical safety conforms to standards for electrical safety IEC-60601-1, EMC safety confirms to IEC 60601-1-2 standard requirement; Manufacturer/supplier should have ISO 13485 certificate for quality standard Electrical safety conforms to standards for electrical safety IEC-60601-1 Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility) and IEC 60601-2-25 (essential performance of electrocardiographs) Accuracy of SpO2 better than ± 1% for range 40-70 and better than ± 3% for range 70-99 yes * Pulse rate range at least 30 to 240 bpm, minimum gradation 1 bpm yes * Power cable length (meter) 3 * Signal strength or quality to be visually displayed yes * Memory Minimum 24 hrs trend memory for SpO2 & PR * Noise Level (dB) 9 Any applicable numeric value User's interface Easily accessible touch button to operate the machine * Inbuilt Software and/or standard of yes * 3/4 communication Display must allow easy viewing in all ambient light levels yes * Electrical protection provided by fuses in both live and neutral supply lines yes * Warranty Warranty 3 years warranty & one year with min. 3 free servicing. * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Viswajit Debnath 486889, CENTRAL HOSPITAL NCL HEADQUARTERS PO - SINGRAULI MADHYA PRADESH 486889 2 30