Dam & Barrage Tenders in Tamil Nadu

Supply of Electrical Consumables As per Annexure 21 Items

Supply of M S Channel ISMC 125 X 65 in 3340 mm length 122 MT and 500 mm length 36 M T

Supply Installation and Commissioning of Single Spindle Automat Machine suitable for Turning Facing Parting and Boring of M S Plain Round Rod up to 32 mm and Hexagonal Bar up to 27 mm with all standard Accessories - 1No.

Supply of 15 Kg Flat Footed Rails Confirming to IRS T18 in 6 Mtrs. Length - 126 Nos. ( 756 Mtrs. )

Supply of M S Angle ISA 65 X 65 X 6 In the following Lengths 1092 mm - 27 M T ( 4263 Nos. ) 457 mm - 150 M T ( 56590 Nos. )

Supply of M S Channel ISMC 75 X 40 having a Length of 1220 mm - 350 M T ( 40180 Nos. )

Supply of M S Angle ISA 50 X 50 X 6 In the following Lengths 3260 mm 106 M T ( 7226 Nos. ) 1066 mm18 M T ( 3752 Nos.) 1900 mm 31 M T ( 3626 Nos. )1632 mm 27 M T ( 3676 Nos. ) 685 mm 11 M T ( 3610 Nos.) 990 mm 16 M T

Supply of following Cutter Parts suitable for Cutting M S Angles in Universal Cutting Machine ( Nu 25 ) (I) Part-I 10Nos. (ii)Part-II 5Nos. (iii)Part-III 10Nos. As per Drawing

M S Rod Bending Machine Suitable for Bending M S Plain Round Rods 6 mm to 36 mm dia - 1 No

Supply of Enamel Thinner - 3660 Ltrs.

Supply of Enamel Thinner - 2100 Ltrs.

Supply of Red Oxide Primer - 5000 Ltrs.

Supply of M S Plain Round Rod ISRO 20 mm having 2020 mm length - 150 M T ( 30000 Nos. )

Supply Installation and Commissioning of 75 Ton C Frame Pneumatic Power Press with all Accessories and Tools and dies required for manufacturing 3 phase Channel Cross Arms

Suplly of M S Channel ISMC 75 X 40 having 1220 mm length - 216 M T ( 24,798 Nos.)

Design , Manufacturer , Supply , Install and Commissioning of 6 Ton 50 HP Diesel Locomotive Engine With Hydrodynamic Power Shift Transmission Suitable For 610 mm Narrow Gauge as per the Technical Specification Enclosed 1 No.

Supply of M S Flat ISF 200 X 6 60 M T and ISF 300 X 8 177 M T having 6 Mtr Length

Supply Installation and Commissioning of 75 Ton C Frame Pneumatic Power Press with all Accessories and Tools and dies required for manufacturing Tapping Cross Arms and Guarding Cross Arms

Supply Installation and Commissioning of Hydraulic Thread Rolling Machine Model H40 with Thread Rolling Machine

Supply of Electrical Consumables consisting of Set of Main Switch 415 Volts , MCB , Forward Reverse Metal Handle and Cable Socket Copper Pin with Ring and Set of LED Street Lights , Fittings and Accessories for HPSV Lamps as given in the Spec.

Supply of Air Compressor Make ELGI or SUGUNA Or CPS or HI TECH Or FRANK As per the Technical Specification 2 Nos.

Supply of M S channel ISMC having 1540 mm Length - 284 M T

Supply of M S Channel ISMC 75 X 40 having a length of 1220 mm - 330 M T

Supply of M S Channel ISMC 125 X 65 fallowing length of 3340mm 101 MT , 500mm 30MT

Supply of M S Channel ISMC 75 X 40 having a Length of 1900 mm - 117 M T

Supply of MS Channel ISMC 75 X 40 fallowing length of 685mm 34MT ,330mm 33MT ,457mm 139MT and 12Mtrs length 7MT

Supply of M S Channel ISMC 100 X 50 following length of 3340mm 147 MT and 12 Mtrs 25 MT

Supply of M S Channel ISMC 100 X 50 having a length 1650 mm - 182 M T

Supply of M S Channel ISMC 100 X 50 having a length of 2022mm 345 MT

Supply of M S Flats ISF 50 X 8 - 350 M T and ISF 65 X 10 - 37 M T having a length of not less than 5 Mtrs.

Supply of Set of Punch and Bush Suitable for Round Holes onM S Angles Channels and Flats as per Drawing - 5 Items

Supply of Set of Punch and Bush Suitable for punching 18 mm X 36 mm Slotted Holes on M S Angles Channels and Flats 175 Sets

Supply of 12 inch Leather Hand Gloves - 4500 Pairs

Supply of Set of Punch and Bush Suitable for punching 24 mm Round Holes on M S Angles Channels and Flats - 128 Sets

Supply Installation and Commissioning of 75 Ton C Frame Pneumatic Power Press with all Accessories and Tools and dies required for manufacturing 3 phase Channel and Guarding Cross Arms - 1 No.

Supply Installation and Commissioning of 100 Ton C Frame Pneumatic Power Press with all Accessories and Tools and dies required for manufacturing 3.5VCross Arms and 4.5 VCross Arms - 1 No.

Supply Installation and Commissioning of 75 Ton C Frame Pneumatic Power Press with all Accessories and Tools and dies required for manufacturing Transformer Structure Set 1 No.

Supply of Air Compressor ELGI Or SUGUNA Or CPS Or HiTECH Or FRANK Or Equivalent- 3 Nos. as per Tech Spec.

Supply of M S Channel ISMC 100 X 50 having 12 Mrtrs. Length - 260 M T

Supply of M S Channel ISMC 75 X 40 having 12 Mtrs. Length- 450 M T

Supply of M S Flats ( a ) 50 X 8 - 220 M T and ( b ) 65 X 10 - 20 M T

Supply of M S Angle ISA 65 X 65 X 6 having 12 Mtrs. Length - 410 M T

Supply Eection and Commissioning of Wireless Based Day and Night Vision Security Camera System in Mettur Work Shop Circle Premises and its Central Store Premises - 1 set as given in the Technical Specification

Supply of Al. Pad For 11 KV DB AB Switches - 600 Nos.

Supply Of Fixed Contact For 33 KV DB AB Switches - 363 Nos.

Supply of M S Angle ISA 65 X 65 X 6 having 12 Mtrs Length - 375 MT

Supply of M S Round Rods ISRO-12mm - 35 M T, ISRO 16mm - 130 M T and ISRO 20mm - 75 M T having Length of 6.40 Mtrs to 6.50 Mtrs.

Supply of M S Channel ISMC 125 X 65 having 12 Mtrs Length - 160 M T

Supply of M S Angle ISA 50 X 50 X 6 having 12 Mtrs Length - 375 MT

Supply of M S Flats ISF 50 X 8 - 375 M T having Length of Not Less than 5.0 Mtrs